Barn Find 1969 Ford F100 Ranger 390 2WD Full Restoration Project

Barn Find 1969 Ford F100 Ranger 390 2WD Full Restoration Project
Builder: Tyler
Build Thread: www.fordificati...
-----------------------------------------------------
This video purpose is to tell world about amazing car build project and to inspire ever growing car builder community around the world. So if you're inspired in building your own car and want to learn more about how to do it in best way, don't hesitate and read build source page so you can learn something new and if something is not clear you can always ask builder some questions about the build.

[@midlifecustoms]

Love F100's. I have restored several of them and look forward to the next one. Great job.

[@felix-huebner-soccer-07]

Any tips on how to get started working on one? I have one and there’s a lot of work to be done but I have no idea where to start?

[@midlifecustoms]

@@felix-huebner-soccer-07 I would recommend breaking everything into small goals. Like getting it cleaned up to work on or started/running and go from there. I don't recommend tearing it all down at once for your first restoration. It can be a little overwhelming. If you like I have a few full build videos on my channel you can check out. Best of luck on your project.

[@scottboettcher]

Hey! I just picked up a pretty sweet one-owner '68 F-100. It's been built with a 427/C6 and had paint about 13 years back. Nice enough to not mess too much with it for now, but wondered about the thumping noise it makes when I go over a bump (larger). It sounds like the bed is bouncing, but I've not had an old vehicle for so long that I don't know where to look. I truly love this truck and I got it because as a kid, I spent my summers with my grandparents and my grandpa took us everywhere in his. Trying to be calm when noises pop up, but I've not worked on old vehicles since high school! Thank you

[@marksmith5994]

Absolutely stunning.

[@richardvalitalo3670]

Wow! I thought it looked good out of the barn, but it sure needed a lot ! Professionnal restoration! Be proud! Enjoy it & don't sell it !

[@mohamedzulkifly8966]

Proud owner!

[@АнатолийФилимонов-с8ш]

Хорошая работа. Мастер.привет из россии!

[@mikefrayman5224]

I learned to drive in a 1969 F1 hundred. Three on the tree with the V-8 engine I believe the 360. It was not the 390 or 352 but it was the camper special and had a lot of low end

[@pa2922]

Very nice! Absolute wonderfull!

[@ablemarine9072]

They sure look pretty before you get them really apart,then you may find a Fred Flintstone Vehicle! Lol I am preparing to do a frame off to my 1969 f250 short box crew cab, Yes one owner was my daily for 40 plus years and got too embarrassed to drive it. Zero dents, perfect doors and pins etc but front floor gone, cab mounts at bases gone lots if rusty typical 67-72 areas. Factory ordered with all the goodies auto ps pb air etc. Not gonna make a shower truck or resto mod. Just gonna clean her up nicely! While I drive my 1970 daily f250 sport custom camper special. It's a survivor. Very very clean and minimal rust issues, paint good etc running gear and chassis Super. Have 431 stroker, C-6, 373 posi, rear end original to truck Thankful to have both Love these years a lot! Congrats on your restoration it's a Beauty!

[@THROTTLEPOWER]

Looking good!!!!!!!!

[@rickbrown7287]

BEAUTIFUL truck dude. I had one back in '78. Was blue and white. Even with gas prices like they are now, wish I still had it. They just don't make trucks like that anymore. 😥

[@donaldseccombe3893]

Best pure truck ever made gas mileage be dammed

[@keithskustoms2311]

Awesome job! One thing I noticed though was your pic of the wiring, why do it from scratch when they have full, labeled wiring harnesses available? Painless or Kwik Wire.

[@moorabinda]

What color is that? Awesome

[@maxhalsted5381]

Ford Blue

[@bobbyboothe8964]

Fantastic video. Fantastic Build. Congratulations on a job well done... About how long did it take to complete. Thanks again. And enjoy it.

[@earlputnal9124]

Damn. And it takes about two years of all of that hard work to bring it back to long life again. If people would only knew how to keep them running and moving. We'd only have to buy them and drive them? SMH. Sighhhh.

[@jefferyschirm4103]

A hand built truck , better than new ! Why not go with a 289hp 302 , 351 clev . something to get 20 to 25 highway mpg ??

[@ablemarine9072]

And Yes not shopping anything out! All metal paint mechanical etc in house. Smiles...........We shall See how this goes. Maybe YT the tear down and back up! That does look time consuming, The Video Part! The vehicle I understand! Not photography. PS really like you re purposed old parts as opposed to after market, hoping to do the same on my exterior body hood etc. Got any ideas who has a parts mix? Please advise anyone who reads this Thanks

[@bread9303]

Beautiful job man, I'm looking forward to do the same with a truck that got here in Arizona for free a 1970 F-100, it's was seating for 20yrs and the truck is in a remarkable condition, your video given me a inspiration. Thank you 👍.

[@larrybair8074]

Better than brand new!

[@fordmuscleluis9710]

Looking awesome I love this Era of ford f-series trucks

[@petersonoliveira8496]

Boa tarde congrats carro 1965 Chevrolet c-10 powered by 1100 Hp engine street rodder vermelho e branco vai amém bom

[@oneshotme]

Beautiful and an excellent job restoring it!!! I'm a Ford truck man but cars I like something in all makes Enjoyed the video and I gave it a Thumbs Up

[@bruceh92]

Wow original is just fine. More than fine, it looks ****in' great!

[@bleab8653]

Beautiful truck. I also have a 69 Ford f100. Looking forward to working on and restoring.

[@troygautreau3535]

Great job - clean!!!!!!!!!!

[@routex1]

Beautiful truck

[@mauriciocastro6363]

This F -100 series model was the one my grandpa had back in the 70s. I loved that truck, I was a little toddler, and everytime my gandpa took me for a ride, when we went back home I started to cry, I wanted to keep going! This restoration is wonderful, I guess this truck must be in the 100k price tag?

[@scottboettcher]

That's why I just bought one too! A nice 68. Takes me back to the late 60's/early 70's. Simple pleasures...

[@harryboschdavidson8125]

Good jobs

[@Truckman1980]

She's beautiful! Nice touch with the bed floor

[@mauriciocastro6363]

I wonder the cost of this restoration on top of the rusted truck.

[@madboyfull]

👏👏👏👏👏👏👏👏😍🇧🇷

[@lstone.09]

Awesome truck

[@venezuela4562]

Exelente

[@keithskustoms2311]

I have the same radiator for my 68 project, what electric fan did you use?

[@ko4otv43]

That was a ton of work! Great job love the bumps and dentsides!

[@mikeilikeit9685]

huhuuuuu nice perfect work

[@zeropointenergy1574]

Amazing.

[@CongoChango]

I always chemical dip my body on frame off builds. It is the ideal way to eliminate all corrosion and find any rot. The metal work is a breeze with no paint or bondo . Plus it make’s bodywork go so much better and the final result is a absolute straight and beautiful paint job. The dip tanks are a restorers best friend.