sorry but why wouldnt you have the vacuum running when you used the brush? Seems foolish to have all that material around and then have to clean up afterwards...imho
@HandmadeCreativeChannel2 жыл бұрын
Let me tell you something when the dust is sticking, you can't clean it with just a vacuum cleaner!! You need a brush!!!
@perfectiom3718 Жыл бұрын
Never been cleaning dust before?
@Melee2KilАй бұрын
@HandmadeCreativeChannel he means at the same time
@silverismoney9 ай бұрын
Thank you. My Fujitsu looks just like this one, and it has gone completely mouldy inside. I don't know why either, I've had them for 3 years and they never went mouldy before. The AC engineer wouldn't come out and clean it so they've been turned off for 6 months now. I couldn't figure out how to remove the plastic cover to even get at it. But I'm going to give your method a try.
@dreamdrifter3 ай бұрын
30 seconds in and you've successfully convinced me to just pay the AC guy $100 for a deep clean 😝
@theodopoulos4 ай бұрын
Thanks for the video. We have three units at home so plan to do this myself.
@vincentdoubt5 ай бұрын
who can really screw the AC engineer , until 2024 still can't take out the blower to clean it ourselves .
@B0r03 ай бұрын
If you have Asthma, make sure you wear a mask when cleaning the dust.
@johncarlozausa8580 Жыл бұрын
I'm an HVAC technician. In my own opinion your method took too much time. What we do is simply just remove the filter, front panel, and the cover to expose the whole evaporator coil. Then we cover the electronic pcb with plastic to avoid water damage. Then we put a wash bag with a hose connected to a bucket, then we wash it using pressure washer with detergent. It would only take 30 minutes to do.
@theodopoulos4 ай бұрын
How about posting a video of this process?
@TomyCroSound2 ай бұрын
How to remove front panel from Vivax V design
@peterrudy92074 ай бұрын
You could use a temperature gun to check before and after cooling temps .
@godofredogodoy74342 жыл бұрын
El tema es interesante, pero pierde todo interés por desconexión del idioma
@massimilianodallagiovanna1204 ай бұрын
Consiglierei invece dello spruzzino qualunque che non consente una copertura uniforme e della bottiglia d'acqua che lascerei nel frigo, uno spruzzino a pompa professionale. In conclusione occorre l'igenizzante.
@zulfikranzulmos40663 ай бұрын
Omg sir it's easier to remove the front cover
@DavidinTexas5 ай бұрын
Ive used these hot water steamers. A Cold water MINI Hi pressure washer, works like a Miracle, Zero disassembly, Full Disclosure = I'm Not married, No (white) carpet, Mop up over flow, under 3-5 mins
@CevunOne3 ай бұрын
Which one do you recommend?
@milenvalchanov12084 ай бұрын
и аз съм със Фуджицу лука ,но без разглобяване не мисля че турбината е добре почистена
@hablandodecarros31632 ай бұрын
It's just better to tear apart the mini split!!!
@hectortorres51469 ай бұрын
Hey this dude is a hack. I’m a real hvac service tech. We don’t do half ass jobs as this. Mini split bib does it faster, how about all the shit left behind that panel you’re not removing. That’s how I absolutely knew you was very green.
@rubyredjeans8 ай бұрын
Where I live in Australia, it’s anywhere between $250 to $$400 for a tech to clean an air con. Too expensive and you don’t need a degree or trade certificate to do it. Plenty of kits on Amazon and videos from service techs on KZbin. Techs/Tradespeople charge waaaay too much in Australia - so they can fund their 4 x 4’s, jetski’s and boats.
@jonniesantos6 ай бұрын
@@rubyredjeans ...it was $600 here (California) the last time I had one cleaned. 😔 Re: Mitsubishi
@jonesguest98246 ай бұрын
@@jonniesantosWhy did cost so much? Was it more than 3hrs?
@jonniesantos6 ай бұрын
@@jonesguest9824 It was probably a little more than an hour. I don’t know how they set their prices. I went to them because they installed it originally. I’ll shop around next time.
@TimothyWhalan3 ай бұрын
That was painful
@10OmarkO01Ай бұрын
Bruh
@cameronmckenzie1969 Жыл бұрын
Don’t be lazy take the cover off and do a Proper job
@quietjohn806 Жыл бұрын
Right. Don't be lazy. And when do you rinse the foam full of gunk off? Not a good way to clean a split unit
@MrJRSLim Жыл бұрын
For what it's worth, the instructions on the foam cleaner that I have says no need to rinse, just let it dry.@@quietjohn806