[hands-On] Oasa R1 Reel Robotic Mower Mähvorgang - deutsch

[@SimonSverige]

The looks the same after it has passed. the only evidence that is has been there are the wheel marks. The grass is all different lengths before and after.

[@ronnybetatester]

That's not true... The crass was cuttet round about 0.25in... that's the way the robot will work in our yard. I've planned a video with less height and larger grass... But I don't think that this will look great in our yard. But all want to see it...

[@robertsosic4669]

Geh bitte runter mit der schnitthöhe, damit man sehen kann wie er abschneidet.... Ich bin wirklich gespannt ob daraus was wird, ob der robi die Erwartungen erfüllt und mach das richtig wo für er gebaut wirt, ich hoffe stark... Nämlich mir persönlich gefällt sehr diese idee von oasa... Und wenn er auf 20mm schön schneidet, bin ich dabei... Leider muss ich warten bis mann ihn richtig testet...

[@ronnybetatester]

@@robertsosic4669 es tut mir leid, dass ich ihn deiner Meinung nach nicht richtig teste. Es ist für heute ein Video geplant - aber auch das wird sicher die meisten nicht zufrieden stellen. Es gibt aber andere Content-Creator, welche genau das bereits getestet haben. Bitte einfach dort schauen. Das schneiden ist meiner Meinung nach kein Problem - ich kann es allerdings auch nicht professionell bewerten, da ich kein Gärtner bin.

[@andreas8115]

Thank you so much for subtitles ;) And you fast production of the videos before the deadline - it SO appreciated! I have a request/question, it seems like the mower not cutting at all, but I guess it does even if its hard to see on the videos, can you record when the mower is working with the "door" open so you can record the rotation/grass?

[@ronnybetatester]

I don't think that I can do this. Sorry. Below the "door" is another plate that you can't touch through the blade. I try to make a video but it's not easy to record under the robot... Sorry for that

[@andreas8115]

@@ronnybetatester Thank you, I understand. Can you lower the height of cut so we easier can see the result of the cut? That kind of fundamental for our final decision about purchase tomorrow.

[@ronnybetatester]

@andreas8115 I have lowered the height but it's hard to see what's from the previous robot and what's the current result... And I'm not sure how to create a video for this... But: all the cutted grass i found was cutted great and it looks good

[@andre90441q]

Great videos but it is really hard to see or hear that it even cuts anything at all. If possible, could you please lower the height of cut to the lowest and demonstrate on a small section of your lawn? And maybe get a closeup after the mower have cut the grass?

[@ronnybetatester]

@andre90441q 2 inches are really low... I try to publish a photo of a cutted section in the Facebook group. I hope this will help too.

[@manueld4508]

Wäre wirklich schön, wenn du mal so auf 20/25/30/35mm gehen könntest….

[@ronnybetatester]

Beim letzten Video waren es 1,5 Zoll... Viel niedriger ist schwierig - werde es aber versuchen...

[@alainreyers]

@@ronnybetatesteryou have difficulty to go lower due to your lawn specifications or the R1 can’t go lower ? ( despite product specifications it’s written 20 mm)

[@ronnybetatester]

@alainreyers the lawn specifications are too bad. I'll try it later but I don't think that my lawn and borders are good for this...