Harbor Freight Folding trailer Upgrades

Рет қаралды 41,991

JR Morris

Күн бұрын

Пікірлер: 27

@youcanthide004 7 ай бұрын

"Sometimes you out smart yourself" thats me, story of my life LOL

@guyh.4553 4 ай бұрын

Hello from the dry side of the state. Like your mods. What I did for tie-downs was on the inside side of the 2 X 4 was I drilled out out a hole big enough for my bolts. Then I drove in T-Nuts. Then I used, like you used, eye bolts so that every time I put the walls in I could tie down loads. The one thing I would recommend is that at the bottom so you can pass a motorcycle tie strap through and you don't have so much issues ratcheting the load down.

@JRMorris 4 ай бұрын

@@guyh.4553 that's a damned good idea 👍

@SD-cr6yn 11 ай бұрын

What color red did you use ??

@JRMorris 11 ай бұрын

It was just a krylon red. It was pretty close

@MrBailey-ng9kw 3 жыл бұрын

Hello Jr, great work, real professional! i have the same trailer I put interlocking corner brackets 2 per side. The corner brackets are sold in pairs. They lock the box soild. Greetings from Ontario, Canada

@JRMorris 3 жыл бұрын

Thanks for the feedback. I thought about adding hasps i could drop a pin in, by I've never gotten that far though. 😉

@mr.m3837 4 жыл бұрын

@ 1:34 "They're probably the leading cause of tetanus in the state of Tennessee"!! Hahahaha 😂 that was her hilarious!

@qouavang3646 2 жыл бұрын

How did you get the 2x4 to fit in the stake pockets?

@JRMorris 2 жыл бұрын

I shaved it down with a saw on 2 sides. I used a handsaw but the table saw or a bandsaw would work too eh. 😉👍

@michaelnoone1565 5 жыл бұрын

Thanks for the video. Quick suggestion: don't use gloves near power tools like you were doing with the belt sander. The glove can get sucked in and your hand ends up looking less than pretty...

@JRMorris 5 жыл бұрын

You're right man. Good idea!

@johnreese5678 4 жыл бұрын

What kind of drill bit did you use to drill the metal? Thanks!

@JRMorris 4 жыл бұрын

Hi John, I used a set of Cobalt penetrated Bits from harbor freight. They'll cut titanium if you keep the heat down, (low speed/heavy feed with plenty of lube to keep it cool). 👍

@ryansantiago941 3 жыл бұрын

@MiniBoatin' 🤥

@MafiaMark716 4 жыл бұрын

where did you get the stake pockets? I'm having a hard time finding any with the same hole pattern as the trailer.. or did you just drill new holes?

@JRMorris 4 жыл бұрын

I used the ones that came with the trailer, but you could easily makes some yourself out of steel.

@MafiaMark716 4 жыл бұрын

@@JRMorris I didn't realize it came with any, got the trailer from someone else. I found some that will probably work.

@guyh.4553 4 ай бұрын

At one point in time, you could get more at HF. Haven't been in there for a while so I don't know. Go into your local farm and ranch store, or even Ace Hardware. They should have them.