Here I am reviewing the Vulcan Omnipro 220 from Harbor Freight. Is it a good value or is it not? Stick around and find out. I used KT Welding 6011 in 1/8 and 3/32, and Hobart 7024
Пікірлер: 26
@nyvenom30w72 Жыл бұрын
i got mine in november 2020, great machine. not single problem to mention. i was nervous at first, thinking i shouldve spent the extra money and got the miller or something. well here i am 2 years later and still mig welding everything i need. as for the switch i have zero issues with the unit i hace. you could probably call harbor freight and tell them whats going on and theyll probably send you a new switch
@timothycaldwell37852 жыл бұрын
anyone who says they are trash knows absolutely NOTHING about welding. I have been a professional welder for 20 years. I have worked in production welding, millwright, structural etc. I now work for myself and have been in business for 9 years and growing every year. I have an omnipro 220 on my truck for indoor jobs, I use it daily and have had absolutely ZERO issues period. So yes they are perfectly fine for pro use. dont listen to the morons who only pick up a mig gun in a production job and call themself a welder. a trained monkey can run a mig gun, they know nothing.
@gillihansmobilewelding7 ай бұрын
Yeah, but the purchase validators always forget about duty cycle.
@delaney37223 жыл бұрын
Thanks for the video! I just bought this welder and haven’t used stick yet, so this was good information.
@sparkiewelds45923 жыл бұрын
No problem. I'll be trying it out with 120V next video with stick welding. Thank you for the comment 🙏🙏
@TheGUITARDJ3 жыл бұрын
@@sparkiewelds4592 sounds good. I’ll be looking for it.
@robertmiller1773 Жыл бұрын
I thought long and hard about buying one of these machines and ultimately decided to buy the Miller. The deciding factor is that the Harbor Freight machine is disposable. There are no parts and no one I could find works on them. $1150 is simply too much for me to pay for a disposable machine.
@dennycooper3075 Жыл бұрын
The switch is fine. Don’t shut it off slowly like you were and it doesn’t arc at all. It’s not an issue. As someone already stated, a light switch can go the same thing
@DXT612 жыл бұрын
You know that Vulcan emblem on front pops down to reveal a small cubby area. I have had mine for 19 months with no issues. I have ran about 30lbs of wire and 15lbs of rods. No complaints so far. I did find the 1/8 7018 setting was a little hot on one setting.
@erichughes4654 Жыл бұрын
YOOOOOOO I’ve had this welder for 3 years use it multiple times a week. I DID NOT KNOW ABOUT THIS CUBBY. For some reason this blew my mind
@loxful4646 Жыл бұрын
I can’t run 6010 on mine it runs then shuts off and so on and I also can’t select 5/32 if I wanted to
@garrettboyer5292 Жыл бұрын
Any ideas on why it won't run 6010?
@loxful4646 Жыл бұрын
@@garrettboyer5292 it actually does but I guess I just have to feed the rod more than i would usually do
@johndunn981910 ай бұрын
Yeah, I'm not satisfied with my 6010 welding. Turn it up high enough to stop it from flaming out and it blows through the metal.
@gillihansmobilewelding7 ай бұрын
It's an inverter welder. It won't run 6010.
@stevensrspcplusmc2 жыл бұрын
If you turn a switch off slow it will arc, it has contacts . You can do the same thing with a light switch. Just turn it off. You can make a breaker in an electrical panel arc as well. Nothing wrong with switch.
@Gyppor7 ай бұрын
Did you ever get the chance to put the clamp meter on the leads when mig welding? I've always been curious to know if these could actually put out 220 amps.
@Sacrificepain663 жыл бұрын
That machine is real good the 220 and the 205 is there a good machines I’ve seen lots of videos of people not complaining about the machine machine people have machines for 18 months or for a very long time and the machine still runs good Lincoln electric sued Harbor freight because they they stole their idea from the 215 multi processor A lot of people are buying the 205 because it’s way better The machines gonna last you for a very long time and I’m gonna get one because they are very good
@hanky640 Жыл бұрын
The 205 is way better? What does that mean?
@schultzpeakranch55012 жыл бұрын
As it goes and does 5 amps more then set lol ya I love mine it does everything
@RjBrown-ks5tz3 жыл бұрын
Any Milwaukee deals yet? Lol I just hooked the argon to mine but haven't ran a bead yet. What psi do you run on your regulator. Nobody iv watched has mentioned it.
@sparkiewelds45923 жыл бұрын
For tig I go twice the number of the cup size. For mig I go about 15-20 depends how windy it'll get.
@chalmerelkins89659 ай бұрын
My switch does the same
@geraldoconnell88442 жыл бұрын
You gotta rehearse what you say dude... you talk too fn slow
@randomschittz94612 жыл бұрын
Not everyone does meth, so he speaks perfectly fine for the rest of us. Get help.