Bumper Fascia and Fender Replacement - Early Model Toyota Camry

This video will show you how to replace a damaged fender and front bumper facia on a 1997 to 2001 Toyota Camry will all new parts. The basic repair procedure steps can be applied to other makes and model cars with minor differences.
If you'd like to make a donation to the channel, please follow the link below: paypal.me/HardlyMoving?locale...

[@richardstone5241]

Great video and exactly what I needed to repair my own Camry since the Ol' Lady decided to have deer for dinner on her way home!

[@hardlymovingpro]

Right on!

[@frdfffdgffgdfdfggdgf]

Very impressive!👍🏼

[@WaynePeeples]

GREAT JOB!!

[@dimarscars329]

Thanks for the video, this may help sometime down the line.

[@hardlymovingpro]

No problem!

[@wp6544]

Thank you, really appreciate the step by step

[@hardlymovingpro]

You bet!

[@robertdiehl9003]

Excellent job & perfect fit......

[@hardlymovingpro]

Thank you! Cheers!

[@gabegarcia7779]

You saved me

[@sammmyds39]

👍👍👍👍👍as usual

[@vweeks181]

Thank you

[@hardlymovingpro]

You bet!

[@johnhalchishick7094]

Yep my 94 camry drivers fender and into lights

[@sweetheelys417]

can u put up a link to certa-part? so i can buy a fender for my toyota

[@hardlymovingpro]

You can go to the certifit website to access their online catalog and distribution locations

[@sporeaddictable]

Where did you get your parts from?

[@hardlymovingpro]

Go to Ebay and you might be able to find a replacement part. I got my part locally from a vendor called Certifit. You can go online via certifit.com and see if there's a local provider near you.

[@hodgee3643]

Where can I find those little plastic bumper clips cause I need one so I can punch my bumper on to the fender

[@hardlymovingpro]

I picked them off salvaged cars at the junkyard

[@hodgee3643]

Hardly Moving Productions dang,ok thanks

[@LifeWithCookie4]

What’s the website you bought everything from ?

[@hardlymovingpro]

I went locally (Memphis, TN) to a national parts vendor called Certifit. Look them up on the internet and see if there's one near you.

[@LifeWithCookie4]

Hardly Moving Productions thank you so much

[@hardlymovingpro]

@@LifeWithCookie4 No problem and good luck!

[@belembujanda4266]

Can you repit please the place to order new parts I need to order Toyota Camry 2002 bumper. Thank you

[@belembujanda4266]

Iam sorry I see my answer in the comments. Thank you very helpful

[@bdm408]

If I only need to replace the fender, do I still need to remove the bumper to access the bolts?

[@hardlymovingpro]

Yes because the front lip of the fender is tucked and bolted below the bumper.

[@bdm408]

@@hardlymovingpro thank u very much!

[@hardlymovingpro]

No problem!

[@hardlymovingpro]

Thanks for your comment and support!

[@antonioc2017]

@@hardlymovingpro hey where did you buy bumper replacement?

[@burntzapato8446]

On the v6 model there is a plastic milk jug looking tank opposite where the washer fluid resevoir is. Does anyone know what that is? Mine is cracked.

[@hardlymovingpro]

Believe it acts as a baffle between the air filter and throttle body to prevent a sudden surge or drop of air flow.

[@burntzapato8446]

@@hardlymovingpro Thank you for the response. Rather than replace it, I'm going to try to fix it with some JB weld and see if that works.

[@hardlymovingpro]

@@burntzapato8446 I just removed mine.

[@chrish1695]

Why wouldn’t you paint before assembling?

[@hardlymovingpro]

Makes it difficult for my paint guy to color match with the original paint finish.

[@rebellion6468]

Question to everyone here, can we put a 2000 camry front and back bumper to a 98 camry?

[@hardlymovingpro]

Nope because for 2000 and 2001 (the last year of that generation) Toyota changed the headlight and taillight design.

[@tomlangford7682]

not only the headlight and tail lights are different the wiring is different. Bulbs on pre 2000 are H4 while newer are the 900x - So, if you attempt it, you'd basically need the whole front clip + jerry rig the head light wiring and back bumper and lights...not sure about the wiring.

[@Iknowyoumadnow]

You are remedial

[@sebtasticall]

I’m still tryna fix her

[@hardlymovingpro]

Not that difficult of a job. Hard part is finding a good paint shop that can match the paint.

[@sebtasticall]

I got hit and run by someone and had this same exact issue

[@hardlymovingpro]

Sorry to hear.

[@chadfuller2352]

Damn all I gotta say is inflation is a BITCH.... $90 for a fender with crap paint at the pick a part last week. Smh

[@hardlymovingpro]

Nothing seems cheap anymore!

[@zacharyjoel9449]

Noooo... rivet the fender to the rocker panel or tack weld it. 🤦‍♂️

[@hardlymovingpro]

Doesn't matter. GM and Volvo rivets window regulators to the door. Why?

[@X11CHASE]

The heavy breathing 🤣🤣🤣

[@hardlymovingpro]

Not a desk job task.

[@BLANDMEDlA]

Just got this Camry from my sister with this exact problem! Thanks, OG.🫡

[@hardlymovingpro]

You bet!