So good to see real woodworking again. Thank you for sharing your craft and your attention to detail. So gratifying to see furniture built without a single stupid pocket-hole in sight.
@GeoffreyAulombard8 жыл бұрын
+StepCorn Grumbleteats Ahah ! I'm not a fan of pocket hole, I use it sometimes to build stuff for my workshop or something to be disassembled ! Thanks man, see you next time.
@markocrf4506 жыл бұрын
Je me lasse jamais de tes vidéos c'est vraiment bien tourner
@GeoffreyAulombard6 жыл бұрын
Merci beaucoup, je n'ai malheureusement plus trop le temps d'en faire en ce moment, j’espère revenir rapidement sur la toile
@jeromematton967 жыл бұрын
sympa tes chaussures de sécurité 😊. très beau travail
@GeoffreyAulombard7 жыл бұрын
Ahah merci ! ;)
@jacquesaulombard88889 жыл бұрын
Pôv tréteau..... Well done guy ! I'm proud !
@GeoffreyAulombard9 жыл бұрын
+Jacques AULOMBARD Ah bah les tréteaux ils en ont pris pour leur grade ! Merci !
@rivergate8 жыл бұрын
Great to see proper woodworking. Subscribed. (And now to find a French speed learning course)
@DavidKirtley9 жыл бұрын
Merci Beaucoup! The table looks good and the video is fun to watch.
@GeoffreyAulombard9 жыл бұрын
+David Kirtley Thanks a lot ! I don't know if you can undestand everything but I'm working on the english subtitles.
@DavidKirtley9 жыл бұрын
I understand part of it but what you are doing makes it clear. I wouldn't worry too much.
@pilpoilpassionbricolage9 жыл бұрын
super,un régal. vivement la suite
@GeoffreyAulombard9 жыл бұрын
+pilpoil passionna de Bos Merci à toi.
@hffcom8 жыл бұрын
flip-flops in the wood shop... been there done that, you will learn soon enough.. ouch, nice video
@GeoffreyAulombard8 жыл бұрын
+hffcom funny comments :) ! Thanks man, love your videos too
@davewilliams3557 жыл бұрын
Si heureux que j'ai trouvé votre chaîne, aimez le travail, salut d'Angleterre.
@GeoffreyAulombard7 жыл бұрын
Thanks a lot ! I would post more videos but i'm so busy now I don't have the time yet. See ya !
@robharrod9 жыл бұрын
Du beau travail! Je ne parle pas français -- Traduction automatique KZbin est sans valeur, mais je l'aime cette vidéo. You have great attention to detail. Waiting for the conclusion!
@GeoffreyAulombard9 жыл бұрын
+Rob Harrod Thanks a lot ! Conclusion coming soon :) !
@atelier_Vosgien9 жыл бұрын
Belle vidéo !!
@GeoffreyAulombard9 жыл бұрын
+Menuiserie Dufays.a Merci, c'était un long travail !
@fabienteillet54409 жыл бұрын
Super cette table basse ! Jolie design ! Juste un truc à prendre ou pas: Je fais aussi des mortaises rondes mais plutôt que d'équarir mes mortaises je préfère arrondir les tenons, d'un cou de ciseau ou de râpé. C'est plus facile et plus rapide je trouve ;) Bonne continuation ! ;)
@GeoffreyAulombard9 жыл бұрын
+Fabien Teillet Merci à toi ! Oui c'est la question éternelle ça! J'ai appris comme ça du coup je me suis pas posé la question. C'est vrai que n'ayant pas le bon ciseau/bédane pour équarrir rapidement j'aurais pû simplement arrondir les tenons. J'aurai probablement gagné quelques minutes :) ! Merci pour ta fidélité.
@grahamhiggins18168 жыл бұрын
Ebeno loved the video. Pourriez-vous faire une table pleine grandeur à un moment donné. Graham, en Ireland
@OskarBergqvist19 жыл бұрын
Looks good man!
@GeoffreyAulombard9 жыл бұрын
+Oskar Bergqvist Thanks man :) !
@antmallett60657 жыл бұрын
Nice work. Just one tip - its easier to round over the tenons with a chisel and a rasp, than to square the mortises.
@GeoffreyAulombard7 жыл бұрын
Hi ! Maybe, I just learnt this way, never tried to round over the tenons instead of square the mortises. I'll try next time I promise :) !
@plumber30065 жыл бұрын
Bonjours et surpris je croyais que tu avais abandonne les videos un plus aussi tu parles 👍je suis à la traîne je me réabonne du coup au plaisir 😂
@EduardoBeecheO8 жыл бұрын
Hi, great job, wonderful table. One question: what software do you use for the blueprints? Thanks in advance for your answer, and keep up the great job!
@christophedupont4837 жыл бұрын
bonjour très belle table très beau travail !!! c'est ou que vous avez trouvez les plans pour réaliser la table ??
@GeoffreyAulombard7 жыл бұрын
Bonjour et merci. J'ai réalisé ce plan moi même, il est disponible en téléchargement sur mon site web www.ebenoswoodshop.com, il suffit au préalable d'avoir installé Sketchup.
@jujumeister76334 жыл бұрын
DIDIER BOURDON !
@maximilienemilie44787 жыл бұрын
Belle petite table ! De quelles marques sont votre dégauchisseuse et votre raboteuse ? merci
@GeoffreyAulombard7 жыл бұрын
Merci à toi ! Ma raboteuse est une triton j'en suis plutôt content (bon rapport qualité prix), la dégau/rabot est une scheppach que je ne te conseil absolument pas (à la limite si tu ne travail que des bois tendre et occasionnellement).
@lmrenaud82727 жыл бұрын
Bonsoir ou vous procurez vous votre bois pour vos créations ? Très jolie table en tout cas !
@GeoffreyAulombard7 жыл бұрын
Bonjour et merci :). Je me procure le bois directement en scierie. Cependant, depuis mon déménagement je ne suis pas aller chercher de nouvelles planches , je ne connais pas les scieries aux alentours de mon domicile (Loiret).