Harley Davidson Front and Rear LED Signature Turn Signal Insert Install

In this video I install my new Harley Davidson Front and Rear LED Signature Turn Signal Inserts. I waited a long time to do this video and am really excited to do it. This is the first install video in my new house since being reunited with my tools and motorcycles. Thanks for watching and supporting my channel.
This is the link to The LED Lights on Harleys Site.
FRONTS www.harley-davidson.com/us/en...
REARS www.harley-davidson.com/us/en...
Please Like, Subscribe and Comment. Let me know what you Think good or bad I am always open to suggestions.
Currently my Mailing address is being worked on I will post the new one when I get it.
0:00 Intro
2:31 A Look at the Stock Indicators
3:11 Whats in the Box
3:53 Lens Removal
5:10 Light Bulb Removal
5:50 Installing New LED's
9:24 Finished Lit Product

[@debrathane7177]

They look really cool! Thanks for Sharing

[@MotorcyclingwithCarl]

Thanks for watching!!!

[@007ramanthakur]

Thanks Carl for such clear instructions 🙌🏼

[@MotorcyclingwithCarl]

No problem I love them. Thanks for watching.

[@user-cm2mc2ip9x]

Indeed! Great instructional video

[@2avanman391]

Great video, very clear instructions. Thank you

[@MotorcyclingwithCarl]

No problem I love them. Thanks for watching and commenting.

[@vitoraimondi2626]

Awesome upgrade Carl!

[@MotorcyclingwithCarl]

Thanks they are awesome!!! Thanks for watching

[@masteralexey]

Great upgrade! I did same on my Softail Slim.

[@MotorcyclingwithCarl]

They are awesome!! Thanks for watching and commenting.

[@XL883CNick]

Those brake lights do look sharp! Still on the fence on the front turn signals being white then amber. Thanks for sharing the info.

[@MotorcyclingwithCarl]

No problem I absolutely love them! Thanks for watching.

[@brianstanbridge4271]

Very good Carl

[@MotorcyclingwithCarl]

I will have a video out within a week about fixing the hyperflash with them.

[@MrParkerfly1]

The instructions say to put the hazard lights on for 30 seconds for the BCM to “learn” the new lights. This supposedly stops the fast flash on your indicator.

[@MotorcyclingwithCarl]

I usually read the instructions on everything but only followed the install instructions. I must have missed that I believe I still have them I will check and if I find it I will mention it in a follow up video. Thank You very much for bringing this to my attention. Thanks for watching and commenting.

[@blackonepac]

Thx alot gd info

[@MotorcyclingwithCarl]

Np thanks for checking it out

[@franciscorivera7451]

Nice upgrade! Thinking on do this to my bike, but what the quick blink on the dash means?

[@MotorcyclingwithCarl]

It is nothing to worry about it is because the led do not have a high resistance I believe. I was just curious if Harley put something in to not make it happen.

[@timfinning]

They look good and easy install. We get rear LED as standard on all our Harley's here I wonder why you guys don't. Good video Carl and welcome back 👍

[@MotorcyclingwithCarl]

Thanks Tim . I am sure it has something to do with $ maybe over there it’s required to be led for the rears. Strange they don’t do the front also. Thanks again for everything Tim. Glad I started doing KZbin I have met some great people on here.

[@ettiennetmalbroughjr9284]

Do they fit flush all the way around when they snap in. I just got a set and when I get them to click in at the bottom I still have a small gap around half of the lens. About enough to get a finger nail in between.

[@MotorcyclingwithCarl]

I would say mine fit nice and tight. Thanks for checking out my video.

[@Zach-cg7dw]

New subscriber here, really enjoying your videos. I really like the look of the bike without the fairing. Do I need anything to remove mine and make it look like yours ?

[@MotorcyclingwithCarl]

Just the plug for the headlight nut. You need to get it from Harley. Thanks for watching and commenting.

[@Zach-cg7dw]

@@MotorcyclingwithCarl thanks and what about the nut itself? I just watched your video on the removal and you swapped for a different nut. Also would you happen to have a link or part number for the plug ?

[@MotorcyclingwithCarl]

@@Zach-cg7dw you are correct I forgot you need the regular nut also. I may have left the part number in the description of the video im at work now so I don’t have any info with me. I could not find it anywhere on line even through Harley I had to have the dealer get it. Some people have said there is an aftermarket on eBay but I have not found it yet.

[@octaviodiokno4667]

great

[@MotorcyclingwithCarl]

Love them

[@wescarpenter1615]

Is there a screwdriver slot to get the new bulbs off if neccessary?

[@MotorcyclingwithCarl]

I will check that tomorrow and let you know. Good question

[@MotorcyclingwithCarl]

Yes there is I was just able to check

[@chrisschneider9407]

Hey Carl. I have a 21 iron 1200. Thanks for all the videos. I have spent all winter upgrading and your how to videos helped big time. I bought these same lights, for some reason I have NO hyper flash. Not sure what the difference between years.

[@MotorcyclingwithCarl]

That’s interesting I will have to look into that.

[@rogershinton7483]

@@MotorcyclingwithCarl Turn your ignition on, don't start it, then activate four ways and turn off ignition. Turn ignition on again and hyper flash should be gone. Might take a few attempts. The system needs to acquaint itself with the lesser draw, of the led lights, from your battery.

[@MotorcyclingwithCarl]

I will give it a try and film it if it works I will put out a video. Thanks

[@GearheadOutlaw]

If it is CAN bus (2014 and up if I recall) you can relearn the ECU as stated in one of the comments here. If it isn't CAN BUS system you need a load resistor for the hyper flash

[@MotorcyclingwithCarl]

I am going to try it.

[@thomasbranch3826]

Has anyone used these turn signals with the team dynamics, magic, strobe module ? The module has a warning about to high a amperage from some lights

[@MotorcyclingwithCarl]

I am not familiar with that module maybe someone will comment.

[@thomasbranch3826]

Sorry talk to text error that custom dynamics magic strobe module

[@johnboyinfl]

Did I see you on the NY Thru Way yesterday?

[@MotorcyclingwithCarl]

That was not me. I have been sticking around the new house exploring new roads and places.

[@mitgrillin669]

Gotta keep em separated! 😎🤙

[@MotorcyclingwithCarl]

Lol thanks for watching.

[@Michael.1974]

Красота👍👍👍🤝🤝🤝

[@MotorcyclingwithCarl]

Thank You

[@motolance4919]

I couldn't find the hole on my rear indicator. I can't seem to take it off. Any tips??

[@MotorcyclingwithCarl]

It should be a slot in the lens. What is your bike?

[@motolance4919]

@@MotorcyclingwithCarl 2021 iron 1200 LED rear indicators

[@MotorcyclingwithCarl]

I am not sure if they changed anything in 2021. They are not led from the factory are they?

[@motolance4919]

@@MotorcyclingwithCarl Mine is stock LED from the factory. However the fronts are bulbs without running lights. Sucks for me

[@MotorcyclingwithCarl]

Yeah they are probably sealed then.

[@patrick13819]

I put them in and they threw all kinds of diag codes

[@MotorcyclingwithCarl]

Really I didn’t have any problems with them on my sportster.