Harley TCMT FXRT Fairing DIY Install

[@godgabriel69]

Looks great!! Nice job with the paint 🎨

[@angelotan911]

Nice!! Just ordered my and came in today! I'll be installing it on my Low Rider S. Thanks for sharing the video!

[@greenguyshrek]

Super fast shipping, good luck on your install

[@mattvogel4846]

how did it turn out?

[@tcmt]

Thanks for your review.

[@BlackFlagAdventure]

I’m hoping to eventually get this fxrt fairing on my 21 streetbob. Excited about your product.

[@charlescastell4638]

Great video; I'm thinking of doing the same fairing on my '18 Sport Glide, so it's good to see the process. BTW: unrelated note, great lawn! Looks like astro-turf!

[@greenguyshrek]

Thanks for the comment and good luck with your install.

[@raincityNW]

Great video man! Good work also.

[@greenguyshrek]

Thank you

[@stefanbergeron1480]

Looks fantastic man!

[@greenguyshrek]

Thank you 😊

[@kevinhale8329]

LOOKS NICE!! I WONDER HOW IT WOULD LOOK ON AN OLDER WIDE GLIDE. I’M LOOKING AT A 2000 RT NOW. VERY INFORMATIVE VIDEO BY THE WAY

[@greenguyshrek]

I’m sure you can fit it, might need a few modifications.

[@kevinhale8329]

@@greenguyshrek OK THANKS

[@reyesrr12]

Nice work!

[@greenguyshrek]

Thank you

[@NewEdgeGamer1]

the other company's don't make these for the fat bob dyna since it has the wider trees so thanks so much man.

[@greenguyshrek]

@@NewEdgeGamer1 good luck

[@kevinmeehan4549]

Looks awesome, great job !!!!!

[@greenguyshrek]

Thank you

[@OliviaBishop-j3k]

nice video ..im planning on installing one on a 2014 wide glide how is the view worrying about not being able to see the road over the fairing

[@greenguyshrek]

@@OliviaBishop-j3k you should be fine, but I’m a taller guy (6’3) I also switched out my triple trees to the Fat bobs for less rake and I ordered a taller windshield. Hope this helps

[@user-bl8bn4kb8m]

Came out clean!!

[@greenguyshrek]

Thank you 😊

[@thiagomassa7619]

Nice! Good job! Do you know if the Klock werks windshield fits on this fairing?

[@greenguyshrek]

Thank you, not sure if that one fits, i got a shield from Clearview and i had to drill new holes.

[@laltamang2160]

I ordered but I can’t do it myself

[@BlackFlagAdventure]

Dude this is probably the best tcmt fxrt fairing video I have seen so far. How difficult was the install? I’m looking to do this on my 21 streetbob. How much did you spend all in with paint primer bondo etc? Just so I have an idea of how much to set aside for the project. Would love a link for those turn signal brackets aswell. Great job dude. Looks 🔥🔥🔥

[@greenguyshrek]

Hi I think i spent 2 hours in prep, and another 2 hours in paint and clear. I watched a lot of at diy videos and i think it turned out great. The link for the turn signals should be in the description. Good luck

[@BlackFlagAdventure]

@@greenguyshrek thanks a lot great job again.

[@narule2695]

Hey man did you install on your street bob?

[@BlackFlagAdventure]

@@narule2695 not yet. Saving money for the kit. Unfortunately my jeep is in the shop right now getting work done

[@narule2695]

Bought my kit I’ll let you know how it goes I got a 22 street bob

[@horine23]

Hey man, give us a full walk around. I want to try this fairing on my 03 wide glide but worried it wont look good with rake.

[@greenguyshrek]

Hi, Ill see if I can do a walk around, but it won't be the same cause I changed out my triple tree's to get less of a rake. This link shows the fairing on an Electra Glide, might be similar? kzbin.info/www/bejne/nJnIdohpl66bjNU

[@horine23]

@@greenguyshrek do you have a video of how you changed out the triple tree? And what degree of rake is it at now?

[@greenguyshrek]

@@horine23 I don’t, but here’s this one. kzbin.info/www/bejne/hKetXmevgJJ1f6c

[@horine23]

What triple trees did you swap out for?

[@greenguyshrek]

@@horine23 i believe it was off the same year Fat Bob.

[@greenlightchronicles7198]

I got a 2013 dyna wideglide.. didnt fit mine .. still waiting over a year to get brackets.. i order the e exact fairing from same vender off ebay

[@greenguyshrek]

I switched my triple trees to Fat Bobs, I think that is why it fits my bike.

[@chrismacharro1560]

Was the plastic peice that covered the headlight off at all?

[@greenguyshrek]

Mine was not to off

[@nickjorge9265]

What paint and clear did u use ?

[@greenguyshrek]

I used Rustoleum spay paint with a Spray Max 2k clear

[@alanpointon2216]

nice install video. Where did you get the speedo relocation kit from?

[@greenguyshrek]

Thanks, my buddy made it for me, I love it.

[@InfamousCreep]

Looks great 👍

[@greenguyshrek]

Thank you, I love all of your content

[@InfamousCreep]

@@greenguyshrek thanks vato 😎👍

[@tommys49]

Yo that's sick I have a 06 wide glide what bar setup do you have please let me know

[@greenguyshrek]

Thanks, i have 8” risers Biltwell bars

[@tommys49]

Your bike is a wide glide right and your risers are straights?

[@greenguyshrek]

@@tommys49 yes, i also switched out my triple trees for fat bob’s. It makes the bike have less of a rake.

[@tommys49]

Yeah bro I tried to find like a narrow glide kit for mine but I guess cuz it's an '06 not available what year is your bike?

[@greenguyshrek]

@@tommys49 i have an 09, but see if this video helps kzbin.info/www/bejne/hKetXmevgJJ1f6csi=X5R4BW9Sr3H3DdOm

[@passerking2]

How did you run the stock light?

[@greenguyshrek]

I had a buddy make a bracket, i don’t use it anymore, let me know if you want to buy it 😊

[@arzaduzit]

Damn this actually look so sick the paint came out hella good for rattle cans definitely gonna cop this fairing. Also do you know if you could run a clockwork’s windshield on this fairing?

[@greenguyshrek]

Thank you, not sure if that windscreen will fit. I did order a clearview shields screen and had to wide the mounting holes.

[@projektiron7105]

Also, do you have a link to the turn signal brackets?

[@greenguyshrek]

I do, it should be in the notes

[@greenguyshrek]

www.ebay.com/itm/373780300113

[@projektiron7105]

Thanks again my man. 🫡🫡 Is the width of the fairing right? 27”?

[@roaddawg538]

Fuck man, that shit looks killa!, i cannot believe that is a rattle can paint job , where did you lean that, i am thinking of putting one on my 2011 FXDB , is the piece sturdy?

[@greenguyshrek]

Thank you, much appreciated. Learned everything right here on KZbin University. Yeah the fairing is solid.

[@alessandrocima6284]

Can you ask your buddy to make another one of those headlight brackets, please please 🙏

[@greenguyshrek]

You can actually buy them from RWD russwernimont.com/products/fxr-fairing

[@alessandrocima6284]

Only seeing the 7" headlight bracket unfortunately :/ maybe im missing it?@@greenguyshrek

[@greenguyshrek]

@@alessandrocima6284 you have to call and ask for the smaller bracket, they don’t offer it anymore on there kits.

[@narule2695]

Is this the one off Amazon?

[@greenguyshrek]

You can get this fairing on Amazon, I found a better deal on eBay.

[@projektiron7105]

Hey dude, what’s the dimensions of the fairing?

[@greenguyshrek]

I think the Weight, 20 lbs. and dimensions, 27 × 27 × 21 in

[@projektiron7105]

Thanks so much, I’ve only just seen this. So apologies! 27” wide? That’s a dream to read! Thank you!

[@cameronmorales4543]

Has anyone put this on a 14 Lowrider?

[@narule2695]

Hey man what grit of sand paper did you use?

[@greenguyshrek]

I used this link as a guide to paint my fairing, he has a bunch of videos on The Best Rattle Can Car Paint job at home. kzbin.info/www/bejne/qnXRlpago9WMg7c

[@SWAG78211]

I found one on Amazon for 79.00$

[@greenguyshrek]

Wow, if you did share the link for others to buy 😀

[@OnePercenterBBNCBC]

BS! I look every day

[@Ray-pw3yh]

@greenguyshrek who makes fairing great video

[@greenguyshrek]

@@Ray-pw3yh TCMT makes the fairing, thanks