Axial SCX10 Deadbolt - RcBro Burly Tubes - Part 1 - $50 Budget Build - Week 9

[@VikingzFan69]

I love the fact you go in depth on how to make it better than just buying bolt on products! But I can see how kids don't or can't go that in depth on a build but the fact you post good bolt on items in the description works great and covers a lot of the build. Plz keep up the great work!!

[@nvghostrider]

There are a lot of producers putting out "bolt on" vids. I'm notorious for calling myself an assembler since tools and engineering are minimal but you sir are a true builder. Build on! Truly setting the bar for aspiring builders.

[@minicooperzoom]

This is the FIRST VIDEO I have watched in 2015!!!

[@markgueren9633]

I'm digging this series... I've done a ton of upgrades myself and started fabricating some parts myself... Keep the ones like this coming... I love the explanations on the why you choose the mods you do!!

[@EvaderKMP]

I love the fab work Harley! I actually went along with building links, and the VP panhard setup. I've got beeftubes in front that I picked up at ECSC.

[@bryanwallace3347]

Really enjoy the more technical info, can't git enough . Looking forward to next week!

[@sonyrrb]

I love all kinda modifications, i have a scx10 deadbolt and I am doing some modifications with the series but I'm not gonna do all the ones, I do not need them all, BUT it definitly don't mean i don't like to see you do them! :) I mean, I'm not gonna do everything shown but REALLY enjoy see you doing, complex things or just simple ones :D Keep the great job, and do w/e you wanna do, we love to watch anyway!

[@RcBros]

Killer video as always, thanks again for your continued support!

[@Dean_Designs_RC]

As always I enjoy and look forward to these updates and upgrades. To keep the whole audience happy what if you did a budget series like you do and a more unlimited and in depth series on the same rig. I know it's more costly with two rigs but would cover both spectrums. Thanks for all you do with this hobby

[@billwaid1834]

I defiantly love the fabrication. I make the part I can before I buy them because I find it much more satisfying use what I made or to just modify other parts to fit my application. Great video and as always a pleasure to watch.

[@Onetencrawlerscomau]

Great Video Harley, a good balance between technical descriptions and easy methodology, Joe average would have nor trouble following this instructable. This will no doubt assist those who are trying to improve their steering and stay in budget.

[@jaredanthony8070]

and I personally like when you do upgrades that are "highly" modified rather than bolt on because it shows easy upgrades that are stronger and personalized

[@mrbottomtooth]

Keep up the more advance in depth stuff please. You are very talented and do a great job of breaking stuff down for us novices. Anyone can RTFM and do bolt ons. Love this build. I really want one of these now to go along with my Wraith

[@HarleyDesignsInc]

RTFM, hahah! I had to think about it for a second. Thanks man, I appreciate the comments.

[@bigdaddyd82vapes92]

Sweet mod Harley! ! you're like a mad scientist with a dremel! ! I plan to get one of these scx10 deadbolts for my wife. I know this build series will be a much used reference for me! She likes throttle lol

[@HarleyDesignsInc]

Christopher Shekels Yes I think that is why my audience seems to be more than half in the 25-45 age range. Thanks for the comment.

[@hawkes123456]

Nice mod

[@scaletruckbuilder]

I consider myself to be a bit more advanced and enjoy making things work that maybe weren't intended like the xr10 mod. I did mine last year trying to follow Tim's thread on RCC, honestly your video makes it pretty much plug and play I wish this was an option when I built mine. Keep up the good work your videos are easy enough for new guys to follow but still keep us old timers following along. Also digging the live feeds should I even admit I watched the 5+ hour yeti video live? Lol

[@obeyconsume6394]

Great vid, loving this series. Starting to regret following my own path for my Deadbolt upgrades - I just replaced the plastic steering hubs with Axial SCX10 aluminium ones. Personally, I'd like to see more custom fabrications mods. There seems to be plenty of vids of bolt on mods, showing fabrication mods could be something new. On the other hand, it's likely to scare a few viewers away!!

[@HarleyDesignsInc]

Custom fab is by far my favorite, but like you said it scares many away. The point of this build is to try and be relatable.

[@customfastrc7671]

I was reading through the comments looking to see if this upgrade can be done to the front currie axle. You mentioned some lathe work needs to be done. Does the Burlie Tubes O.D need to be turned down some and do the vanquish vvds offer the same strength as the ones shown in this vid. Thsnk you.

[@dccrawlers7595]

Keep up the awesome work Josh I love the more technical videos!

[@feliciano1358]

Hey another great in-depth video! I had a question about bevel and pinion gear set ups for the axles on the wraith. I purchased the HD gear set from axial. 43t and 13t pinion and the 38t bevel and 14t set. The gear ratio in the Trans is the same as stock just all Robinson racing with a Gen 3 slipper. What do you think will work the best? The 43 in the rear axle and 38 in the front or the other way around? Thanks again for all the effort in the videos they are great.

[@franciscofernandez1831]

very good friend this contribution I wonder if the commanded tubes do with a lathe or sell these

[@HarleyDesignsInc]

francisco fernandez I don't know what you are asking.

[@franciscofernandez1831]

Harley Designs I'm prefunrando friend you is that if your fabricaste the piece that put the differential

[@joeldezwaan1149]

this is the best episode in this series,

[@FOXCRF450RIDER]

Love the fabbing of parts. Its awesome to make better parts work, rather than settling for of the shelf per the application. Get most technical! Haha

[@rcs_rc_az961]

I almost didnt recognize you in such an old video LOL Keep up the "more in depth" videos man!!!

[@markmtbrider]

GOOD STUFF. mods with simple hand tool perfect for this project imop.love the deeper fab info too,but we all know how expensive that can get.

[@elijahyoung7372]

@harleydesigns I am trying to locate an scx10 battery relocation plate by howler customs however I can't seem to find it. Can you help me?

[@mapleledgerc1377]

Can't wait to see the end result, great vid and keep up the great work

[@evanharich9769]

Hey Harley, would the vanquish vvd v1 shafts hold up under some abuse? I plan to upgrade to a Holms brushless setup and I already have vanquish scx10 knuckles and c hubs as well as the titanium tierod and don't want to buy wraith knuckles and c Hubs. Thanks a bunch.

[@JCRC]

Nice show :) At 2:24 I see the original axle housing slightly open at the top. Does the new added part stop that from closing properly and make it an entry point for water and dirt? Thanks

[@briancoke303]

I think that is because he only has the bottom bolts in so its loose enough to be able to spin the tubes to line up the dot to put the bolts in.

[@HarleyDesignsInc]

I just hadn't tightened up the screws yet. Everything closes up nicely.

[@JCRC]

Harley Designs Thank you for clearing that up :)

[@jt4x46366]

If you the vanquish vvd can you use them with this the rcbros and just add the wraith parts?

[@BTandKM111]

How do you know the splines are aligned properly?

[@locksnpropsfpv7255]

Have you got a length on what you cut the shafts to. I only have some spare wraith long unis but yeh if you had measurement would be great

[@HarleyDesignsInc]

This was so long ago, I don’t have that info any longer.

[@BANTAM53]

Anyone can bolt on mods. I'm liking the more skill mods that make you think!

[@Spanky8402]

I like mods like this. I like how you describe everything in the video. Thanks. I hope you keep doing stuff like this and you said you like doing these mods so it is a win win for me. :)

[@justinmachado4020]

R u going to axial fest because im taking my deadbolt but its pretty stock

[@mrmadmike427]

Happy new year Josh (Harley) .

[@themfknightrider420]

i love the more in depth way..looking at these for my build

[@YakAlien]

great idea, yes love the in depth stuff !

[@brigidtrigsted1628]

what is the part number for the tubes that widen the axles instead of the "stock" width tubes that you are using in this video.

[@MyAmin8]

i guess you can find em at rcbros under the burly tubes

[@fedrickwiley9014]

How was the stock esc with the 3s lipo?

[@evoxgeo]

Harley what is the benefit of using the burly tubes or upgrading the?

[@HarleyDesignsInc]

+George Urquidez I discuss the benefits in this video. What do you mean by upgrading? You didn't finish the sentence.

[@justinstrickland446]

Kinda off. How good do those wheels hold a bead and go together? I went to the link on the other vid and didn't see a price on them either? 2 or 3 piece beadlock system?

[@HarleyDesignsInc]

They hold a bead well so far. The link to their website lists where you can get them and whatever dealer you like. You can can see all the details and construction styles in the video where I install them as well. They are a 3 piece.

[@justinstrickland446]

Thanks man

[@DargoDog]

I just did this mod not to long ago on my new Rubicon kit. Dunno... The drive train is REALLY noisy now, I'll have to get some abuse on it to really tell. I don't see why these tubes cannot already be drilled, perhaps offer them both ways. And, for another $50 offer up the axles precut as well. I do a lot of custom fabrication on my rigs, but I found this one tedious and would have preferred to pay someone to cut the axles to length.

[@DargoDog]

DargoDog Also, not sure if this is normal with this mod, but I had to ship the axles at the hubs to remove the play that was in them.

[@RCBashist]

Haven't really seen any running video of this truck yet.

[@HarleyDesignsInc]

I'm bad at getting running video, usually when I go on a trail I go by myself. Also its been crazy cold here and has kept me from going out too much.

[@brianhilligoss]

How does this mod compare to currie axles? I know it's a lot cheaper but do the curries perform better? Btw just installed my battery tray you showed a few vids back, just what i was looking for. Keep up the great work.

[@fr8cture]

curries are just a fancy stock scx10 housing. they are not splined and run stock scx10 components.

[@brianhilligoss]

Noticed that after I posted. For some reason I thought they had a different hub setup.

[@fr8cture]

brian hilligoss you can modify curries to fit wraith hubs but it would require a lathe and such.

[@3chasemanges3]

hey harley what CAD software do you use cause i need something like CAD for building a 1:1 king of hammers truck but dont want to drop a huge amount on something thats more than i need

[@HarleyDesignsInc]

I'm an engineer for my day job so the software I use is all pretty expensive. I prefer Solidworks for vehicle design.

[@3chasemanges3]

alright thank you very much.

[@guyincognito210]

of course we want the more in depth mods. anyone can do a bolt on/swap out.

[@Captncouth]

how come the burly tubes you're using are straight, but if you go to his web site the stock ones have a notch in them? Did you actually use the U4 ones?

[@HarleyDesignsInc]

The stock length ones do not have the notch because you cut that area of the housing off. He just has the picture of the standard tubes on the stock version listing.

[@Captncouth]

cool, thanks Josh

[@hanau73]

Would the VP VVD Axles work instead of modding the XR Universals?

[@HarleyDesignsInc]

Steve Oh No because the stub axle for a SCX is different than a XR/Wraith. A set of SCX inner shafts and a Wraith stub axle may work and that is what I may try next as I broke a shaft in Canada. So we may find out in the next couple weeks!

[@Scuroater]

+Harley Designs ok so just to clarify your recomended the vanquish shaft but the vanquish shafts will still need to be trimmed and cut?

[@Scuroater]

+Joe Pansacula or did the vvd wraith stubs work with the scx10 shaft?

[@BlackSmithRC]

Awesome mods bro.

[@MrJcosenza79]

Nice!! I like your information, very helpful.

[@scrindoomybindoo]

I bought the deadbolt 3 days ago... Did I fuck up? Should I have went with a scx10 ii?? FML..

[@HarleyDesignsInc]

The deadbolt is a fun truck still, but I do prefer the new SCX10-2.

[@waynenagle34]

hey I like the fab stuff myself as long as it is able to b done without 3d printer or welder and can be done by regular hobbiest cant wait to see how it preforms still working on blaser

[@alexaparicio12]

Nice vídeo, Harley

[@jaredanthony8070]

wait an episode on time? I mean early for the west coast but still what happened to the real josh?

[@TrailAddict.]

IN DEPTH!!!!

[@S30Uploads]

kick ass! subbed and thumbs up!

[@jezza9275]

plus vvdd i think you call them work like 3racing

[@HarleyDesignsInc]

VVD's are made by Vanquish and are made from high quality materials. The 3Racing versions are by no means what I would suggest.

[@jezza9275]

yeah my friend has broken his a few time then went to integy ones has broken them yet

[@mlevesque3022]

Are these the ones you used? rcbros.com/?product=brass-burly-splined-tubes

[@HarleyDesignsInc]

M Levesque No, those are the extended versions. The link to the proper length tubes are in the description.

[@mlevesque3022]

Thanks, I over looked that.

[@dylaneagleton3090]

Caster