Laptop Power Button Ribbon Cable

Reverse 20-pin, 0.5-mm-pitch Amazon Link: amzn.to/3KXvwLX
Reverse 9 Pin 0.5mm Pitch 200mm, B-Type FFC FPC Amazon Link: amzn.to/3xtaDoX
Forward 40 Pin 0.5mm Pitch (A-Type) 200MM FCC Amazon Link : amzn.to/4bk90b5
Forward 30 Pin 0.5mm Pitch (A-Type) 200MM FCC Amazon Link : amzn.to/3KY6WKZ
Forward 26 Pin 1mm Pitch 200MM Length A-Type FFC FPC Amazon Link: amzn.to/3xwoCdw
Reverse 17 Pin 1mm Pitch 200MM Length B-Type FFC FPC Amazon Link: amzn.to/4bhzgCD
Make your broken laptop Power button, Front panel , Mouse pad Ribbon cable..
www.arieslaptoptraining.com

[@gerylmarconi8958]

dude!!!! honestly, one of the best tutorials i have ever seen in youtube....you just saved me big bucks....i was going to take my laptop to get my power button and mouse buttons ribbons messed up like in this tutorial and thanks to you now i can fix them myself....thank you so very much.....

[@brianepstein8444]

I HATE ribbon cable. I break out in a cold sweat when I see the stuff, and if it smells fear, ribbon cable vaporizes into dust instantly. it also self destructs if it is: exposed to air, deprived of oxygen, exposed to sunlight, moonlight, or darkness, the oils in skin, latex gloves, and optimism. so i find myself trying to work on electronics calmly, wearing leather driving gloves, during a 16 minute period at twilight and without looking at what im doing. You sir, are my HERO

[@charlesventer]

Best.comment.EVER!

[@wilmerleal22]

I freakin feel your agony

[@cromaxs]

Dude the flex razor trick liked to knocked me on the floor when I saw you do that in 2 seconds I spent like half the day yesterday with a hard razor and ruined a whole damn ribbon trying to strip the damn thing every freaking time I would almost have it striped one of the stupid copper pieces would break. Just seeing you do that trick was worth seeing the video thanks Sir.

[@BP-sf7br]

Nice work... Extremely useful when you don't get apropriate cable, just modify available one

[@izwanadam8094]

thanks a lot man..u make my day..a friend asks me to clean the fan of his laptop, but accidentally i ruined the cable, for the touchpad and power button. i have a replacement for the touchpad, but i dont have one for the power button. i use your technique to fix it.brilliant.nice one man. regards from malaysia :)

[@schottkg]

Great Video ! I'm going to give it a try but first I'll need to prepare an excuse in case I have to go to the ER. I got queasy watching you work that razor. Well Done !

[@interceptorm5]

Brilliant tutorial. Thank you so much.

[@Trevixivert]

Man, you just saved my laptop. 10/10

[@kai_OMG]

Thanks man..You are GODLY genius..I didn't expect that the strip ribbon can be cut open

[@ShaunNelson]

This has just saved me a lot of hassle and money thank you.

[@maxskamo]

Procedure worked like a charm. I was doing in a wrong way. Thanks

[@sampaiocosta4270]

Muito obrigado pela demonstração.Parabéns

[@maggieblyth2077]

Great video, there was a lot of fiddly work done there but your camera work was excellent, a lot of times when people do videos like this you miss the fiddly bits that are crucial. Well done you.

[@HarshadPatel]

Thanks.

[@mohammedakram1681]

@@HarshadPatel can I made it up ,coz I cant do that

[@manueldiaz3215]

Eres todo un artista. Gracias por enseñar a tanta gente de no sabemos.

[@brijeshchudasama4711]

Thanks Patel Bhai. It's very knowladgable to be.. actually my laptop's ribbon cable about to brake.. i was thinking to anyhow fix it ....this vido helped me a lot..

[@xptweak]

thankyou so much for this tutorial, I fixed my JBL bluetooth speaker, the power FFC cable was damaged and did not found that cable anywhere, and there is no proper service centers for the JBL speakers, I managed to open the speaker and got stuck with the cable, it was only a small issue, but I am unable to switch on the speaker, I thought my 10,000 rupeas speaker is gone to the dustbin... never thought I could fix my speaker.. seeing your tutorial i fixed the cable and the speaker works great now!.. amazing!

[@Britec09]

Nice work there Harshad, I going to give this a go myself.

[@hosfer09]

Muy util he impresindible ese interesante video ara solucionar muchos pero muchos problemas EXCELENTE.

[@henrydeancornico3393]

Thanks a lot!! this video really helped me

Buen Vídeo. Muy útil. Excelentes ideas, me ha servido mucho. Gracias.

[@patricepergeaux6901]

Excellent exemple, merci pour cette belle leçon !

[@JahanZeb1976]

Excellent video ever! Great lesson on making ribbon cables. Keep upload good work. Regards,

[@barneystintson1239]

Great work man Helped me a lot

[@sgestetner2689]

thank you worked on a sony vaio pcg-9201 i used the same damaged cable cut off the damaged area with a scissors. I didn`t have a flexible blade so i used a straight razor using the point i scraped off each pin slowly untill all the plastic was removed, just don`t cut it too short because the sony vaio needs more ribbon cable to move the power button into place thanks again

[@edivarwallace6521]

parabéns pelo suas explicações,valeu.

[@jcruizc]

Excelente amigo, muchas gracias, me ayudó muchísimo. Éxitos

[@WILLY52368]

Macgyver, bra the things I see you guys do is amazing. Here I am scratching my head trying to figure out "how" along comes the master🤙

[@jonnevangarderen1093]

thank you soo mutch!!! i have bougth a to big sice cable and i cut a couple of pins of and it works(if i didnt see this i would have trowen it away)

[@krystelfreeze4906]

Super Clever sir. You just saved my Alienware laptop. Take care.

[@juliocesarcamachogonzalez9890]

Eres un experto amigo.. felicidades.. xd

[@Pavel-ne2mf]

fantastic!! super work! can u make subtitles (english?)

[@AJITMOREYMCMB]

nice creativity and helpful in rehabilitation process.......

[@Ka-El68]

Very good "how to do", great job, thanks for share.

[@alcampojbap]

excelente video solo falta el audio y manos a la obra gracias tio

[@krishnavik]

Very Helpful tutorial video. Thank you Sir.

[@muhammadbashir9722]

Nice and helpful video. great Job.

[@adityamundra3699]

Thanks alot, it saved my time and money.

[@gojohnnygo3209]

Thanks, a very informative video.

[@mwolf7780]

You saved my day sir. I had a hp pavilion dv5, which has quick launch touch button and have 9 pin flex connector, what i do is I had a old canon printer which has more flex connectors in cartridge side, i cut a 12 cms and done with this tutorial. And done. Now I m happy

[@HarshadPatel]

Thanks 🙏😊

[@masood33077055]

I m going to trash my expensive laptop to buy new one just watch this video and saved big amount thanks buddy

[@sherifghoraba8594]

Thanks a lot, it is great!!, please help, how can I get such a ribbon cable?

[@TarunVox]

Bhai bht badia meri bhi touchpad kk cable kharb hui thi.

[@SoumenMishraKansbahal]

Very very helpful videos....Love your stuff..

[@marty-fh1rw]

Hiya,good video.I noticed alot of boards dont have a good retention system.Almost Impossible to repair.Thanks.

[@cruickshankguinness6895]

yESSS! I FOLLOWED INSTRUCTIONS And THING WENT SMOOTH AND MY LAPTOP POWERED ON!! OMGG

[@michaelmcclain82]

Keiivyy S-P dats what I like to see and learn. God bless

[@ductai54]

Thank you very much !!!! :D

[@gscomputerbdcafe]

thanks brother!.. you just saved my printer!

[@mastermindcomputerskalmuna5403]

Excellent work, Thanks a lot and God Bless you.

[@HarshadPatel]

Thanks for your wishes

[@jbefr]

Great job, my friend

[@pankajcephas8285]

Thanks i learned alot from this video. You made my work very easy. Am going to execute it into reality.. I hope it works...

[@suraensuraen773]

அருமை! பிரமாதம்! எனக்கு தீர்வு கிடைத்தது.நன்றி! நண்பனே...

[@erbkgupta8679]

No Words to Say..!! , Great !

[@juangreen7655]

exelente trabajo... felicitaciones

[@DTHC1982]

Excellent . Just the thing that i need. The thing is that i messed up my touchpad ribbon cable, and the question is because i can not find E315127 20696 cable,can i use some other mark of cable as long it is on 30V? It is for Asus G55V.Any advice i would appreciate.

[@area51music61]

Awesome thanks Man

[@kostas.chatzikyriakos.svokos]

Excuse me what cutting surface do you use, because on my table one catches and one doesn't. Thank you!

[@ralphsamuelvillareal5207]

Is it okay to use only soldering iron and without the flux? I don't have any alternatives

[@santiagocorralestriana1138]

Excellent, Thanks for all.

[@mudassirali2158]

Master at his job.

[@AXORVE]

Excelente muchas gracias :D

[@criscaceres]

the ribbon labelled "1mm fcc cable" has number printed on it which is "20624 which is same as the ribbon on my HP G62 power button ribbon. I got ribbon with same number but pins are much smaller then my G62 power button, I also had 2 strips of another ribbon with the number "2896" written on them but the pins/wires match the same size as my power button. My question is if I am able to use that ribbon with the numbers "2896" that match wires/pins as my broken power button and would it would?

[@wcemichael]

I need to put a flat 6 pin female connector on ribbon of this type. Is there an exact name for this connector? Where can I find one?

[@every2007]

THANKS VERY MUCHS! From VENEZUELA!

[@sitkom9393]

Where can I get that blue plastic thingy? It seems necessary for the cable

[@abhishekarora1]

Hi, I replaced my power button ribbon but after that my laptop keyboard is behaving strange like some keys acting as power button. If I remove the flex cable its works fine. Any suggestion/solution?

[@cocktail5345]

nice ,i need to know name of material use it by brush in last stage please

[@zeeshansattar1012]

Chip prophylaxis and from 2 end batery point 1 and three batery to suplies.

[@milanchakraborty1052]

Ribon connection repairing technic nice and fix Thanks for tutorial video....

[@ShaikhMohammedAqueel]

Thanks brother.

[@majidhussain5551]

Thanks very Helpful . Very Nice job

[@lorenaolivas]

you are a genious mr thanks!

[@dwaynesitaram9937]

what did you use to connect the ribbon cable to the power button

[@KEGP]

Your this video is really nice and informative. I wonder if yiou could post a video of connecting speaker wires to sound card of SONY VAIO VGN-S4M/S - LAPTOP.. Thanks.

[@safdar88]

Thanks gr8 work

[@balaycebu9261]

how to solder the power jack socket amd wire cable. the model of the laptop is SONY VIAO PCG-31311W

[@vexile32]

How do i make a double sided ribbon connection I need a 10 pin with both sides connected

[@hackersingh2344]

brilliant sir...

[@joehornback8550]

Good video.thank you

[@My_Soul_FooD]

Great Job. Salute you 👍

[@BrianMatthews1987]

Very helpful

[@nnkteja]

how much it shall cost for power button ribbon cable and touch pad ribbon cable of dell xps l501x laptop that are beneath keyboard.

[@bikashDas-xh9fp]

I need one ribon cable for my lenovo g450 laptop.. Please tell how to buy

[@jamescedricdavid6454]

thank you very much! i was trying to know how to expose the cables and you just need a blade.

[@sj3698]

Thank you ..

[@adnalaakhil2247]

Please tell What the size of ribbon cable used for switch....

[@dr.format8422]

Perfect 💕 so useful for me 😉

[@rjnsdn]

Hello brother. I was told these cables need to be specially made and would cost around Rs.1500 for two, one for power button and one for trackpad. And, a similar looking wire cost around Rs. 60 each online. And is there any need of checking ratings of the wire?

[@UsmanKhan-wg7qe]

Hi great video . I was hoping that some how I can buy a ribbon cable from you . Do you sell ribbon cables internationally?

[@avishalpradhan]

Fix my problem amazing video thank you soooo much u save my leptop 😭😭

[@franzelquebec7643]

this video is very help...i need ribbon for my led keyboard on my laptop

[@siddharthkushwaha8660]

Blue part is broken in my cable...what can i do now...if it stick it again will it work....what is the use of that?

[@bebekbiswas8786]

very nice!

[@theoneandonlyblaze]

how much would u charge to fix mines

[@SlawKingOG]

Nice video thanks.

[@rainkaryllcarcuevas1484]

Is it possible to do this with different ribbon? Or it must be dissame ribbon?

[@demontagemontage]

THANKS

[@kimmers17]

Can you just solder broken cable points to power button board? Glue holding in place & don't want to rip ribbon off if no need. Also, what is the greyish stuff brushed on & after soldering? Many thanks. Great video.

[@HarshadPatel]

Blnd_E hold cable on pad and use nice clean solder tip for solder it ...with brush use flux

[@catxyplaysroblox]

Hi I accidentally ripped out the part where that goes like to clip do you have any suggestions to put it back in or fix it thanks for reading great video

[@ashutoshverma2650]

Patel ji kya aap bta sakte hai ki sold krte waqt jo glue use kiya tha uska naam kya hai aur kha milega its urgent

[@ednaldosilva6700]

Alguém poderia me ajudar? Se eu cortar um pouco o lado do cabo flat ele irá funcionar normal??