Hart Work Table Sold By WalMart Was A Bad Purchase

Hart Work Table Sold By WalMart Was A Bad Purchase
I own several portable work benchs and this one is by far the worst of the lot. Hart Tools...i know why this was removed from your line and forgotten about. People, be aware, you will not like this 'thing' at all.

[@dougfitz-randolph7232]

Despite what you say in the title and comments, you don't really make a case for it being such a horrible table in the video. You got one that's defective - if all the legs aren't attached securely, of course it's going to wobble. This table works just fine and makes a nice, solid work surface, based on my first-hand experience with it.

[@ultim8benchwarmingchamp59]

So I had the same issue with the legs on mine. If you look inside the plastic was not cut out properly. Took me five minutes with an exact knife on a gun range 50 miles from civilization. I’m actually a fan of these tables for the price. I own two because I like the color and I take them to the range. The wobble is an easy fix. Lift it up and set it down again. Let the casters set themselves.

[@Untouchable1932]

I got mine at Walmart on clearance for $30, marked down from $75. I have had ZERO problems with it. The box is supposed to come empty so that you can put your own tools or materials in it as a convenience. The legs fit into the table and turn/twist once the slots line up like a socket bayonet. This product has long been discontinued by Hart, but I'm glad I got one. I use it all around the house for a variety reasons, even as an extra food table.

[@readyrobradio]

This table works great for me and that compartment is for storage. I been using mine for 2 years and no problems

[@LuminairPrime]

FYI to the next person to come along: this table is good, but many parts are fragile, so if you manhandle it like this, you can break it. To attach the legs properly: grip only the plastic of the leg to avoid detaching the aluminum; push it in hard while turning backwards until it stops; then keep pushing in hard while turning in the right direction until it locks tight. You can probably do this with one hand, so if you find yourself leaning over with two hands trying hard like in this video, beware. Forcing plastic-on-plastic parts (or just banging it around) will break the plastic. The advantage of being made of nothing but plastic and aluminum and glue is that it's lightweight and rust-proof.

[@user-en1bg9eh1w]

I've had mine for over a year now, had no issues at all. After watching your video, I'd have to say, it's more a user defect, than table. And expecting extras in the box? Really? For $50? I've stood on mine to reach bulbs in my garage, I've used it to hold my toolbox while cleaning out the truck, no problem. There's nothing wrong with the table, if it's defective, take it back, it's a walmart product, not really that difficult

[@ToniMBullock]

Agreed. I LOVE my table.

[@alloutofdonuts3998]

I pait $24.99 for mine HART at Walfart and it did came with tools in box in fact it was full of them I’m surprised they didn’t break it open and spit out all over the floor before I do get out of the store. J/K tho 😂. The legs on mine did the same or just fell out when I turned it over lol. They weren’t in all the way = operator error. Remember kids: “Righty-tighty-whities, Lefty-skiddy-marks” 🙃😉:wink: Thays not a thing. I use my table for welding, notching tubing, cutting steel tube, working on all kindsashit, it works great. Not sure if i trust the 1000lb weight rating but then again I ain’t trust nobody🧐🤨. J\K again. Good talk. 😅

[@akbuilder7626]

Thats the Husky bench just rebranded and without the router opening.

[@recyclespinning9839]

The wobbly is not good, if you cutting on a mitre saw for example you want stability.

[@groundhog5923]

You didn't even look to see how the legs lock into position. You just sort of blindly jammed everything together and when the legs fell out you just blindly jammed them in again. You seem like you would be dangerous around tools.

[@ScrollsawVideo]

They push in and turn slightly, just like the other benched that are branded with a different name. Thanks for watching.

[@73dcswan]

Yes, very few videos about this table in the quick search I did. I just got my table tonight (4/1/2022) and put it together real quick. All my legs attached as they should and the table is very sturdy for me. Things happen, I’ve gotten stuff with faulty parts before such as it is in mass production. You weren’t missing anything from the storage box either, mine only came with the instructions as well. The two things I have seen as a negative is 1) What are those 8 tabs to accommodate? Will there be more attachments I.e. fences that can snap into them etc? and 2) Why was the middle molded like you could take it out to put in a router plate to use as a router table? One feature I really wish the table had. But all in all, I can’t find anything negative about my table that makes me want to return it. Edit 7/18/22: I have found that Home Depot has the same table, just different colors because it’s Husky branded. But theirs comes with the 2X4 hangers to extend table length along with some other pieces which also includes the router templates and the you can actually mount a router to theirs. It does have T-Tracks to be able to put a fence on it for routing. Their cost $100, which was the same price as Harts I believe if not picked up while Walmart/Hart had them on clearance. Still a very good table, but will also be getting the Husky one for added functionality.

[@davidhoman3807]

Either the leg is bad or the hole is bad. Try that leg in a different hole and see what happens. When you go back to the store, look at another one of these and look at its black case that snaps into place. Yours might have been removed, and taped back into place.

[@DroneManMurphy]

I looked up this video because I’m sitting here holding the last one of these that my Walmart has. It shows on the box that the box is for storing parts that you have. The legs on this one fit right. This one’s a keeper.

[@dgtlionbarger]

Have you found a functional use for the storage box? I can’t think of what I would keep stored under the table like that

[@fredholmes6284]

@@dgtlionbarger clamps

[@HARTTools]

We're sorry you had trouble with this, please reach out if you need assistance.

[@ScrollsawVideo]

Tried and no one wanted to reply.

[@HARTTools]

@@ScrollsawVideo Who did you contact regarding this?

[@jimmygraham1408]

Just bought one and then seen this video had same problem with one leg looked down in the leg hole plastic was cleaned up good took my knife a file would probably do better cleared the extra plastic so the leg would seat gave it twist works fine now sat on it weigh about 190 no wobble but this is something they need to correct in the molding

[@thomasmcmurray9414]

Thanks Carl. Been looking at Hart products but this doesn't look so good. Not sure how much Hart products are carried here in Canada. Thanks for the info.

[@Mathamim]

The Jobmade model (with the plate for the router) have the same problem. There is a left over plastic from the molding process. Look inside the hole for the leg, you will see it inside. Just use long nose pliers to clean the left over and it's good to go.

[@Trump-The-GREATEST]

lol .. the round feet adjust to any surface shape of the floor as they stiff wobble to contour the floor. They just need to break ina bit so the next time its set again the free freely move to adjust smoothly. Worth the $50 especially when using it to put my power wrench tools & tool set on it while working on BMW engines!

[@sissymurphy9620]

found it weighs 17.38 lbs great for women quick review means you did not use it . by the way the one you have under it is wobbly . It says it is a tool box right on the front of the box really this is a review . you can see you did not push that leg down far enough weight matters I am a woman and only 5'2" and others are huge and heavy

[@ScrollsawVideo]

Thanks for watching. Being this workbench is a clone of several name brands (which I own two of) I know the abilities of this bench. I prefer the same workbench from Hisky (Home Depot) which comes with several accessories in the toolbox. The Hisky model also came with working legs! Go to HD and check it out, you may be pleasently surprised.

[@sissymurphy9620]

@@ScrollsawVideo I did at the store it is heavy and for a short person it is no good . I lift it and it is still on the ground . I don't need extra garbage just a portable work bench that does not wegh as much as those do . You know that women out there are builders also RIGHT 2 decks and perglos and a shed . I need a portable lightweight work bench i don't need one that holds a thousand pounds . Not sure when or why any person would ever need a workbench that holds a thousand pounds anyways . They need a workbench made for us . I have a toughbuilt and need a handtruck to get it where I need it so too me useless but it was a gift . Up deck stairs up shed stairs useless more work that it is worth

[@scotthunter1237]

You’ve got a defective one I have two of these and the box on the bottom is a storage box.

[@davidfreethy]

Great for RC Car maintenance

[@toddhenry3309]

The Hart table looks very similar to Husky’s table. I think HD were selling them.

[@ScrollsawVideo]

Its very similar...Keter makes most of these type of worktables.

[@kisarader]

I have one and it's been the best investment since the table saw because I mount the saw on the table when I need to cut stuff this guy is ignorant mainly it's a better product made to the same standards as keeter table just change the label and there you go he needs to do his resume before opening his trap

[@ScrollsawVideo]

Thanks for watching but obviously you didn't pay attention the video.

[@chaostactics]

This video is a good example of why KZbin needs to bring back the thumbs down. If you can't operate a tool (table) you shouldn't be reviewing it.

[@ScrollsawVideo]

For the algorithm, q thumbs down does nothing more or less than a thumbs up. Thanks for watching the entire video.

[@76mmM4A1HVSS]

leave it to a boomer to stretch out a 30 second video to 9 and a half minutes

[@eanger01]

It says 1000lbs on the front of the box seen it when your were flipping it around

[@kaywonderer]

They all do it, has nothing to do with being boomer.

[@ramlinman2004]

Learn how to use it before you post a video criticizing it.

[@ScrollsawVideo]

Please make a video on how to use a portable workbench.