Harvest Right oil filter system

[@janetsysuarez5463]

Thanks, really easy to understand. Will be trying this out.

[@Auggies1956]

Moister bubbles in your oil sight glass or is your oil foaming from being over full?

[@ANATURALDREWSASTER]

You may want to see if the reduced airflow affects temperatures inside the dryer.

[@chuckallaire7964]

I've paid attention to the airflow but not the temp ... I've had no problems whatsoever. I've run a small fan on the pump to help it keep cooler and I've seen no change in load times. I'd be worried if this unit was in a garage but it's in my basement where's it's cooler.

[@kellyeckhardt1302]

I encountered a couple issues with the parts list. My pump module is a HRC 7-115 and the oil drain plug comes straight out of the front of the pump cover. Not a big issue but did require an additional fitting. The second issue was the fitting to replace the oil fill plug, the fitting was very sloppy and bottomed out when turning it in by hand. I added multiple layers of Teflon with the same results. The last issue is the brass oil fill cap, it would only go on a couple of turns and the seal it would take a couple of wrenches. My issue may be the result of having a different pump model. Doesn’t the oil cap need to be air tight to maintain vacuum?

[@garypritchett7039]

I like the setup. Whenever you can, would like a parts list, Thanks!

[@chuckallaire7964]

Here is a list .... all links to Amazon Power Supply www.amazon.com/dp/B00UHI3NGS/ref=cm_sw_em_r_mt_dp_U_ugFyCbQ5GFP5N Power cord for power supply www.amazon.com/dp/B072BYGKZZ/ref=cm_sw_em_r_mt_dp_U_2TFyCb60RHM90 Pump www.amazon.com/dp/B00L8IHM9K/ref=cm_sw_em_r_mt_dp_U_9jFyCb06NXV0R Filter www.amazon.com/dp/B000CNLOHS/ref=cm_sw_em_r_mt_dp_U_qmFyCb6C0CPCJ Mounting bracket www.amazon.com/dp/B000CSGT64/ref=cm_sw_em_r_mt_dp_U_QnFyCbVAQ3TD3 Upper Tee www.amazon.com/dp/B013NVPVBU/ref=cm_sw_em_r_mt_dp_U_lrFyCbAJ8V3YS Cap for top of tee www.amazon.com/dp/B013NVVU8S/ref=cm_sw_em_r_mt_dp_U_jBFyCbRNVTV0G Upper adapter from pump to Tee www.amazon.com/dp/B07DJQRT7T/ref=cm_sw_em_r_mt_dp_U_ExFyCb38PRT6Q ¼” hose adapters need 3 of them www.amazon.com/dp/B013VQPV7G/ref=cm_sw_em_r_mt_dp_U_9yFyCbFMB24A4 Hose www.amazon.com/dp/B000HE5DUG/ref=cm_sw_em_r_mt_dp_U_IOFyCb7DNR6YN Hose connectors www.amazon.com/dp/B006IOZ3YU/ref=cm_sw_em_r_mt_dp_U_JCFyCbCRS4TNV Connector to bottom of pump www.amazon.com/dp/B006PKKZL8/ref=cm_sw_em_r_mt_dp_U_SHFyCbPYST68V Connects elbow to tee you need 2(other one connects valve on tee) www.amazon.com/dp/B003NXYB5Q/ref=cm_sw_em_r_mt_dp_U_6JFyCbM56C3HG Lower Tee www.amazon.com/dp/B000BQUTBS/ref=cm_sw_em_r_mt_dp_U_DFFyCbBNC7HRH Hose connector from tee you need 2 (other connects to valve) www.amazon.com/dp/B013VQLSGO/ref=cm_sw_em_r_mt_dp_U_LMFyCbFXGNH6M Drain valve www.amazon.com/dp/B074373TH6/ref=cm_sw_em_r_mt_dp_U_9RFyCb6P5XMV4

[@garypritchett7039]

@@chuckallaire7964 Thanks for the link. It only links to the power supply though. Didn't list any other parts.

[@chuckallaire7964]

@@garypritchett7039 click READ MORE. ... The entire list is there

[@mikedutt5818]

Hi Chuck, how do I get a parts list please?

[@kolobkolobkolobkolob]

Yeah nice but they do void the warranty for any slight modification of the unit especially anything to do with the pump. dairy land always been a problem with the machines. Its thought by Harvest right to cause the smell problem they were having. I think the smell is just from the gasket myself. Nice vid and looks like it works well, but don't use dairy land oil. Sup video

[@obewise]

Thank you for posting this. What product are you using to control the timing cycle of this system?

[@chuckallaire7964]

I just use a smart outlet .... Can start or stop with my phone from anywhere ... Can see how many cycles, if it's on etc ... Super easy

[@jamesbutler271]

Great video! Thank you fro posting. Where is the parts list? I want to build the same thing. It shows you as being in Iowa, I'm over by CR.

[@chuckallaire7964]

Here is a partslist: Power Supply www.amazon.com/dp/B00UHI3NGS/ref=cm_sw_em_r_mt_dp_U_ugFyCbQ5GFP5N Power cord for power supply www.amazon.com/dp/B072BYGKZZ/ref=cm_sw_em_r_mt_dp_U_2TFyCb60RHM90 Pump www.amazon.com/dp/B00L8IHM9K/ref=cm_sw_em_r_mt_dp_U_9jFyCb06NXV0R Filter www.amazon.com/dp/B000CNLOHS/ref=cm_sw_em_r_mt_dp_U_qmFyCb6C0CPCJ Mounting bracket www.amazon.com/dp/B000CSGT64/ref=cm_sw_em_r_mt_dp_U_QnFyCbVAQ3TD3 Upper Tee www.amazon.com/dp/B013NVPVBU/ref=cm_sw_em_r_mt_dp_U_lrFyCbAJ8V3YS Cap for top of tee www.amazon.com/dp/B013NVVU8S/ref=cm_sw_em_r_mt_dp_U_jBFyCbRNVTV0G Upper adapter from pump to Tee www.amazon.com/dp/B07DJQRT7T/ref=cm_sw_em_r_mt_dp_U_ExFyCb38PRT6Q ¼” hose adapters need 3 of them www.amazon.com/dp/B013VQPV7G/ref=cm_sw_em_r_mt_dp_U_9yFyCbFMB24A4 Hose www.amazon.com/dp/B000HE5DUG/ref=cm_sw_em_r_mt_dp_U_IOFyCb7DNR6YN Hose connectors www.amazon.com/dp/B006IOZ3YU/ref=cm_sw_em_r_mt_dp_U_JCFyCbCRS4TNV Connector to bottom of pump www.amazon.com/dp/B006PKKZL8/ref=cm_sw_em_r_mt_dp_U_SHFyCbPYST68V Connects elbow to tee you need 2(other one connects valve on tee) www.amazon.com/dp/B003NXYB5Q/ref=cm_sw_em_r_mt_dp_U_6JFyCbM56C3HG Lower Tee www.amazon.com/dp/B000BQUTBS/ref=cm_sw_em_r_mt_dp_U_DFFyCbBNC7HRH Hose connector from tee you need 2 (other connects to valve) www.amazon.com/dp/B013VQLSGO/ref=cm_sw_em_r_mt_dp_U_LMFyCbFXGNH6M Drain valve www.amazon.com/dp/B074373TH6/ref=cm_sw_em_r_mt_dp_U_9RFyCb6P5XMV4

[@peterwinder718]

What brand of smart outlet are you using? Does it allow you to schedule the pump to come on each hour for 24 to 48 hours? Most of the smart outlets limit the number of schedules that you can create.

[@chuckallaire7964]

Yes you can program this how ever you want. I have a Wink Hub2 and works great. Check this out at Amazon.com GE Enbrighten Z-Wave Plus Outdoor Smart Plug Switch, 1 On/Off Outlet, Weather-Resistant, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 14284, BLACK www.amazon.com/dp/B06W9NWFM3/ref=cm_sw_r_other_apa_i_OneWCbW2X1ZMT

[@peterwinder718]

Thanks for the info. How often do you cycle your pump during a batch?

[@peterwinder718]

@@chuckallaire7964 How often do you cycle your pump during a batch?

[@chuckallaire7964]

@@peterwinder718 I stopped cycling during the batch. I wait until it's done and run it for about an hour.

[@niemier911]

How often do u get a new diesel filter?

[@DrewanNicholson]

What size is the fitting which goes into the vacuum pump where the red cap was?

[@chuckallaire7964]

I used a 3/8 NPT to 1/2 NPT to the tee ... wrap several turns with Teflon tape. It does get to 5psi so it can spit a little oil ...

[@DrewanNicholson]

@@chuckallaire7964 thanks! What about the drain connecting?

[@chuckallaire7964]

1/8 NPT ... I put an 1/8 elbow and increased size to 1/4"

[@fyzxman3293]

Thank you for the video. I have the same pump, not the JB brand. Would you provide me a full parts list? I would like to build this. Please send it to my email.

[@FlyingFoxFruits]

thank you sir

[@tbaine]

I like the the idea i seen Brian's set also. I think I'd just cycle the oil between batches instead of cycling while drying is running its batch. I don't believe it wouldn't take long to filter a complete pump full of oil.

[@RT-gs7fj]

Over heating

[@chuckallaire7964]

I know some people out fans on the vacuum pump ... Mine is in the basement where is cold