HASBRO'S QUALITY CONTROL IS OUT OF CONTROL

[@bapo22]

New figures that use the Bucky-Cap shoulders have them on flipped. If you compare Human Fly's shoulders with an older Bucky-Cap, the muscles are going the opposite way. Same with figures that use the Coulson/Chameleon shoulders; Everett Ross, Mr. Knight, and Mr. Negative. Reversed wrinkles are fine, but the sleeve seams are now incorrectly on the front. And some of the figures that use Grim Reaper shoulders have them backward too. Also, if you go back and look at the old comic Mysterio figures, both his shoulders are the same piece instead of being mirrored. I think there's a design flaw with the upper boots/calves of the upcoming Molecule Man and Wonder Man. On their renders, the upper boots are on opposite legs and they curve in, whereas on the figure they curve out. You can see this in the promo shots where they tried to recreate the pose on the box.

[@Xmanny87]

Interesting. I never even noticed that. Good eye.

[@JayWoods483]

With their commitment to increase prices in hopes to escalate lagging sales, Hasbro doesn't do itself any favors with their craftmanship. What you pointed out was shameful and I would be embarrassed to claim some sort of responsibility for it if I worked there. Hasbro ML has forced me to look elsewhere for the value in the money I spend for my Marvel comic characters. My ML QC issues have skyrocketed this year at an alarming rate - from Mme. Hydra's arm falling off straight out of the package (where is her scar on her face?), to the visor on the new Cyclops is not straight or with the same thickness across the mask (it ends in a point at one end). With gratitude towards you giving me the advice of not tolerating issues and returning them for refunds have been a blessing, yet one I wish I didn't have to do. And why did the new Bullseye come with a holster and no gun?

[@grudgematch6653]

A lot of people wanted an updated daredevil figure on the renew your vows body (which is what we got) but unfortunately we should’ve been more specific… we should’ve gotten it WITH painted gloves and boots.. Hasbro always thinks they’re slick.

[@Xmanny87]

I’ll take a good look at it when I get mine in hand. I’m sure they’ll release another one in a better deco. Probably in a retro wave or something like that.

[@Erik_Lehnsherr-MAGNETO]

@@Xmanny87 exactly what I was thinking lol

[@grudgematch6653]

@@Xmanny87 I believe they will also but I'll still get the 3 pack just in case because that would be a potential risk since where not 100% sure.

[@grudgematch6653]

@@Erik_Lehnsherr-MAGNETO I hope it looks even better than this version

[@ultracarterzilla6939]

Articulated ninja reviews also did a modification fix in the G.I. Joe classified series hips on outback.

[@Xmanny87]

I’ll check his video out. That’s my homie.

[@isaacortiz5463]

Man it’s sad how greedy the company has gotten.. I’ve slowly gotten out of collecting hasbro stuff and canceled more than half my preorders already.. the price of 2/3 marvel legends gets you a Mezco or Mafex figure.. been choosing quality over quantity these days.. Sad when your a marvel fan.. Having the same issues with mind bender and the venom torso:/ Thanks for voicing this for others to hear! Appreciate you bro!

[@thered_hood7451]

idk if im the only one but my sentrys left leg is longer than the other and he always leans to the side when i stand him straight 🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂ i was so excited when they revealed him

[@Xmanny87]

🤔 didn’t notice that on mine but I have seen that happens before in other lines.

[@AngelG_2003]

I had also gotten really bad paint chipping on my 3 pack venom figure. It seems like I’m not the only one who has this issue.

[@Xmanny87]

You are not alone my friend. That’s why I must voice this for the community.

[@mr.funtime967]

I wonder how Mcfarlane would do with the line. I legit want him to he able to make Spider-Man figures due to his past with marvel comics

[@Xmanny87]

Don’t get it twisted, his QC is worst. Joints always popping out of socket. I’m pretty sure that if he made the line, all we would get is as many Spider-Man’s as he does Batman’s lol.

[@mr.funtime967]

@@Xmanny87 lol I can agree with the joints, mainly the arms, popping off. But otherwise I have one of the lines and they aren't as bad as you think. Yes, I got one of the newer lines around 2020. But still, I think mcfarlane wouldn't be as bad as we think

[@fortressmattimus3984]

My Tiger Force Outback has the same issue with the drop down hip joint. Waited over a year to get that fig, but luckily he came back in stock and I got a second. Still had that issue on the second, but at least I knew to add oil. My BATs all had this issue too. They clearly need to fix that. Also had Sgt. Kreels arm sheer off at the butterfly joint and RYV sheered off the boot at the calf swivel. One of the pegs on Iron Spider is also dangerously close to snapping off. Luckily, I haven't had any of the paint issues that other people had like with RYV Spiderman or the 2 pack Venom, but it's been a rough QC year for Hasbro with me. The first figure I noticed started the trend with cheaper materials was on retro Spiderman 2099 last November. I always take extra care and measures to ensure my figures don't break, but all these issues were out of my control and there was no saving them

[@Xmanny87]

I think I’m going to pass on the Tiger Force versions. Just gonna go for the regular versions. But still, that sucks to hear. I had no issues with my BATS. They’re one of my favorites this year.

[@everythingmancoolcd7841]

QC issues are very annoying from time to time

[@chadkinsler9865]

It can be very frustrating dealing with Hasbro, they steady rushing out figures with price increases but with terrible quality control

[@Xmanny87]

Yeah and also using cheap gummy plastic on premium design engineering for functions such as drop down hips. It needs to be a stronger plastic for them.

[@fillerbunnyninjashark271]

Not frustrating at all. Stop buying it

[@Taikuken]

paint can be reapplied, but that Serpentor detachable hood is complete trash. Hasbro’s choice of design is awful !

[@rickytoddbotelho9555]

You keep it up. Because you're one of the truly best pooptube reviewers on pooptube. And it's lucky that pooptube has great, influential characters like you on pooptube because pooptube is sorely lacking in quality pooptube individuals to keep us informed about upcoming and current, exciting action figure dollies on pooptube 😛

[@troyr4521]

Appreciate the heads up on Venom because sooner than later, I'm buying the Symbiote 3 pack. The only qc issues i had this year were the ones you pointed out awhile back on some of recent 60th Anniversary Spider-man figures i.e. Amazing Fantasy #15 Spider-man, Future Foundation stealth suit.

[@Xmanny87]

You’re very welcome. The Future Foundation paint apps were atrocious on mine.

[@averageyoutubecommenter1760]

One of the legs on my Spymaster is capable of popping off and is a tiny bit loose sometimes, but I can easily put it back and it stays and looks good no problem. The paint on his eyes is a tiny bit off center, but it is hidden by the Shadow on the temple. I also encountered the leg breaking issue with King Cobra and had to have it replaced. I also notice that sometimes, figures on the Bucky Cap & Dreadknight / Green Goblin bodies have a slight bent at the hip area, which is present on my Quasar, Sleepwalker (who also has uneven eye paint that should be a tiny bit more slanted, but is well hidden), and aforementioned King Cobra. I also noticed that most figures on the Grim-Reaper body mold either have farther knee joints causing the lower legs to kick out more (sometimes it’s only present on one leg), or they have loose hip joints causing the upper body to wobble and glob back in certain poses, which is present on my Genis Vel and a Whirlwind. I also prominently notice that some of the Build-A-Figure parts tend to have warped spots from the packaging and need to be straighten out via hairdryer or hot water (Examples from my end: Armadillo’s shell, Ursa Major’s back fur, Bonebreaker’s compartment door, and the Controller’s belt). Finally, and I’ve been hoping to say this for the longest time, whoever is sculpting the heads is not making the peg holes deep enough, as more often than not, there is often a gap in the neck revealing the peg.

[@ItsYaBoiPhoenix]

I don’t know if anyone else has notice it when hasbro makes cuts for hinges, I’ve found with several figures that they were cut out of alignment specifically (and most annoyingly, neck hinges. Instead of moving forward and back they cut them diagonally. In addition to that I’ve seen misaligned wrist pegs that shift the hand out of place, cracked shoulder joints, and even joints that were put on incorrectly. I had at least one of each of these on each of the marvel legends Quake/Maria Hill figures I bought. It took 8 tries before I got one with no defects, luckily I bought em on Amazon and could send them back over and get another one fairly easy. I love that quake figure and the marvel legends line but they need to get this shit under control.

[@monolith_g]

They ran one mold knowing you WILL NOT RETURN IT

[@bradforever4489]

Fight the Shills Manny! Hasblow has been releasing way too many quality control issues. A huge one is the overpriced Cobra Viper 3 packs that has the wrong skin tone on the viper. They care over retail per figure in the 3 pack even though it is an on line exclusive with plastic free packaging and just straight up repaints. The greed is too much

[@everythingmancoolcd7841]

I wish hasbro had solutions for these problems

[@Xmanny87]

I don’t think they do at all.

[@shanehai2699]

Hasbro doesn't care... That's a huge part of the problem.

[@everythingmancoolcd7841]

Yeah

[@toylips]

Shit is waaaaaack! I got my AF Spider-Man and he straight splits in half when you bend him at the waist... Those guys can't improve it if they don't know the extent of the issue. Good on you for using your platform to show us both sides of the coin. 🤙

[@Xmanny87]

Whhaaaaattt?!?!? That’s terrible! I’ve seen a video that looked like what you’re describing. Thankfully mine didn’t come out like that as I love my figure. And yeah, I have to voice this for the community.

[@ZedKaizoku]

Wow now that you told me about Morg need to check his thigh due happened with Wolverine VHS when got 2 right boots 😑but good thing ordered 2 because came prefect. Received Mindbender today need check Qc with leg also. Thanks for the heads up much appreciated

[@SoupedUpCustoms]

Agree. if only it's cost as low as 10$ per figure. Collectors wouldn't be goin' crazy over the blatant qc issues. But the price isn't even for masses anymore. Hasbro couldn't even give value for the consumers' money. Looks like Hasbro's obsession for profits and cost efficiency sales abandoned their own QC department.

[@Xmanny87]

It’s unfortunate and sadly, it’s true.

[@TheToyOdyssey]

I used that oil and immediately remedied his stiff joints.

[@Xmanny87]

It works great

[@privateprivate31337]

I have my Knull Venom posed in a way where the spider butt shows and he looks like he's standing straight

[@SalCollects]

Mostly had issues with classified drop down hips. Those pegs are very weak and i tend to always find stress marks. So now with every new figure i apply shock oil just to be sure.

[@Xmanny87]

Yeah now I won’t hesitate to do that after this Mindbender.

[@marvelingabout8240]

It it easy to mess up even in the factory with the new packing. They put these in little foam bags. Hard to notice something is wrong. The big retailers can't see obvious flaws that they would likely send back. The joints aren't as good as several years ago. Yes, a little gummy and warped but didn't stick or tear off as much. Good Vid!

[@hasbrosucks6033]

Feel so bad for you with two right thigh for Morg. Such an awesome fig. Looking forward to your ML Top Ten! EXACT same problem with my venom. The paint is super thick, remind me of the liquid wite-out. The knee joint is super gummy as well. Can't f***en stand the fig! Gonna return the 3 packs. Not like I feel bad for Hasbro or Amazon. Do you think they will re-release Venom as a single fig?

[@Xmanny87]

Luckily all 3 Venom’s on mine have no issues with the knee. If they come out with a new Venom, they have to retool this one for a pinless version to avoid those warped legs.

[@andrewhizer8886]

I definitely get a dud every once in a while. The last one was Havok’s bicep stud was shaved halfway off so if I pulled on the arm just a little it would pop right off. I know someone fought that before shipping it but I guarantee they had no reason to care because it doesn’t come back to bite them in the but personally. Just us

[@Xmanny87]

That sucks.

[@OnkelCthulhu]

about the KiB Venom, ther is a trich, put the lower crunch all back and the upper all forward, logo ist perfekt and he goes around 2mm smaler and gives him a bulkier form, best Venom imo.

[@andersonmondinifavarin4288]

I had a QC issue with my Hellfire Club pack. I can't pop the heads off from Emma Frost and Jean Grey. Emma's neck is almost broken, so I can't pop off to remove the cape, for example. The same for Jean. I seems it's a QC issue in the heads and they cause the damage on necks when I tried to pop them off. The same with MCU Rescue, some heads don't fit well and I almost break the neck. Unfortunately I could not replace them, that was frustrating.

[@Xmanny87]

Oh man that really blows. Sorry to hear that. Hellfire Club is not a cheap set.

[@deadybrock]

Same exact thing happened to my venom; saw the lil white flake come right off. So need to touch that up...

[@InfiniteASMR662]

Pretty cool figures! 😎

[@Jojo_Jostar7]

Yeah i recently got the venom 3 pack and mines chipped there too plus the lower left leg of the spider has a scuff mark and the white on the hands is like flaked off in spots and a tiny bit in the eyes like for the price id expect better qc luckily i have brand new fine tip paint pens.

[@Xmanny87]

It’s always good to have those trusty tools to fix or touch up some figures

[@AlanDavidDoane]

That Mindbender leg issue is unacceptable. I don't understand why anyone involved in the production of action figures at Hasbro even has a job anymore. Thanks for calling them out on it, Manny. Great work as always looking out for the community.

[@Xmanny87]

Thanks bro. I had to. Someone’s got to voice this louder for the community. So I wanted to make my stance here.

[@AlanDavidDoane]

@@Xmanny87 Thankful that you did. My Mindbender is coming tomorrow and I may not even open the box.

[@yoitsvic1126]

Great vid. If the people in charge at Hasbro (including the triplets) were actual fans, this shit would not fly.

[@Javicustom]

I did go A QC issue with the venom three pack and when I first got it riot blade has no pig and the venom figure headed the same issue when you use the abs crunch

[@Xmanny87]

Oof!

[@Supertomscustoms]

I highly doubt they’ve changed the type of paint they use. It’s just a factor of plastic hitting plastic. Even the best customizers spending hours on paint apps can totally prevent rub and scratching. Thousand dollar statues will scratch if you rub two pieces together.

[@nhyar]

Oh, man, I scratched the paint on my Venom too... Exactly that same spot. I repainted it but it's still noticeable and I'm super careful because it's definitely going to scratch again if I don't pay attention. The joints are super gummy too... I really wanted the Venom from this pack but I'm having so many regrets now... Also, my biggest problem is that I can't get a replacement. I got mine from Amazon too, but I got mine from Amazon USA via Amazon MX because it was waaaaay cheaper that way... So my only option was to get my money back and send the figures back and then get the figures from the Amazon mexican stock for $30 dollars more... definitely not doing that after testing their bad quality first hand... Sigh.

[@Spider-Criminal]

Crazy how hasbro has gone down in quality on things that weren’t a problem before. I’m not sure what’s going on over there but someone has to call them out on it

[@raulzavala9061]

I have a Batman figure from around 2004 from the DC Universe line that had two right biceps.

[@Xmanny87]

Mattel had very poor QC back in the DCUC days

[@aceyotoko123]

I raced to check my morg as soon as I saw your video. Thank goodness mine is fine. I'm so sorry you got a defective one. You shouldn't be dealing with this crap on a haslab product.

[@shannonjohnson4315]

Quality Control is going to be WAY WORSE since window packaging has gone away

[@Xmanny87]

Straight up

[@LeifOftedal]

Did the same thing with my venom. Amazon swap and now I’m super careful with that hungry ab crunch lol

[@Poundz978]

Use and exacto knife to cut away at the top (inside) of the torso cut that chips the paint … Damn the haslab figures two right thighs is ridiculous… quality should always be top priority with crowd funded projects …. Goes to show… they don’t put much effort in the projects The GI Joe figure hip peg is glued stuck and is putting stress on the joint as you try to pose …. It’s going to break for sure

[@lonewolf9578]

I tried getting the AoA Rogue recently The first figure had really weak feeling ankles, the second I got they just straight up snapped off the moment I tried to move her ankles

[@ReggieKong64]

My af15 spider-man and a very loose arm swivel that wouldn't stiffen no matter what I did it would just fall off at even the slightest movement

[@shindanrod]

All my Joes have suffered from the drop down hips, it is atrocitous. I already got used to the fact that every new joe I got, have to take the legs appart, glued the fuck out of the drop down hip, and voila... I applause Hasbro for trying to incorporate premium funtionality like this, but you can't add premium desing in cheap plastic. The trademark gummy plastic hasblow uses is not compatible with the desing, and the pins need to be sturdier and thicker like Valaverse or any import figure that uses the same system.

[@Xmanny87]

Facts on top of facts. I’ve said this before too. It’s a damn shame. Even when they try something good, it still fails but I we can hope is that they improve on it. These QC needs to stop.

[@tfnut]

I can understand the new standard price of these figures being $25 IF quality wasn’t a problem but it seems like after the price increase, whatever factories they use were pumping out figures with so many problems and Hasbro seemed to just stopped caring about the final product. They weren’t perfect before, but I feel like quality was better or at least getting better before the price hikes.

[@TMP912]

My beast didn't come with a head, arms, legs, or a torso. I infact never received it.

[@Xmanny87]

🤣🤣🤣

[@lostonwallace1396]

It is sadly commonplace for Hasbro's Marvel Legends figures to have QC problems. Sometimes the limbs aren't tight. My Iron Fist's forearm joint is so loose, that his lower arm frequently falls off completely. All of the old female bucks have warped legs that are spindly looking, and make these figures difficult to even stand. Some times feet pegs are warped, resulting in one foot not lying flush to the ground. My King Cobra figure's leg broke on the thigh joint. Turns out that Hasbro used that translucent plastic underneath all that metallic green paint, meaning that the pegs were also made from that plastic. That plastic is a fairly brittle plastic, and has no place being used on joint parts AT ALL. So that broke while the figure was simply standing up on a shelf! Not happy about that. Every figure I've bought lately deals with joints that prevent maximum movement of limbs. You can only raise arms up so far, and paint tubbing on tops of legs, shoulders and abdomens are as common as the lack of paint apps! The bottom line is this: Hasbro is using inferior plastics, and is doing way too much re-use trying to save money. They skimp out, charge more, and are trying to recoup losses that they've sustained during the past for years due to the Pandemic, etc. Hasbro is giving us less, but charging us more for that privilege. No one believes that Hasbro gives two squirts of piss about saving the planet by moving away from plastic packaging. We all know better. They are simply trying to cut costs, and are greenwashing. Corporations are going to squeeze every drop out of a turnip, and they don't care about quality. Quantity, yes, but quality is likely to ever be a top priority. They may say so, but it won't be so. At best, we're going to continue to have inconsistencies occurring with each figure release. One figure might be grand, with extra care and quality on display for all to see, while another is just going to be a generic effort at best. That's the deal. That's the reality. Either way, don't expect a lot of rational decision making from Hasbro, nor should you expect much in the way of extras and accessories. Not where Marvel Legends are concerned, at any rate. Hasbro is a corner cutting organization. Budgets dictate quality, and Hasbro would rather produce more figures of a subpar quality, than do less figures that have more quality. That's business. That's absolutely big business. That's corporate.

[@lostonwallace1396]

@Laken Anderson Yeah. At the end of the day, we all have to decide whether something is worthwhile or isn't. The only power the consumer has is spend wisely. If you don't like something, don't buy it. I try to do that these days, because money seems to be tighter than ever now.

[@lostonwallace1396]

@Laken Anderson Sounds pretty cool!

[@u-barrytoyz3081]

Shock oil and hot water won’t fix these leg issues. After it cools down it’s tight again. It’s common in only the joes because of the drop down feature. You have to take his leg off and sand down the peg a little. Then apply shock oil and pop it back on. It sucks you have to go through that and do it yourself but it will save the leg from breaking off. Most of my long awaited PP bats are all super tight just like your mindbender

[@Xmanny87]

Shock oil usually works fine for me without any extra sanding. But with this kind of peg this used, yeah I’ll have to sand it down. What do you use that works best for sanding? A dremel?

[@u-barrytoyz3081]

@@Xmanny87 light grit sandpaper or Emory cloth works well. Or even a mini file tool.

[@thefatman69dude]

Lol hasbro be charging more and giving us less. It truly is a dark age for marvel legends

[@Hulkitout]

Also any arm molds that share Walmart exclusive Dr strange arms breaks off at the gloved forearms.

[@OverlordProductions]

And here I thought I was the only one who ran into quality control issues lol that said didn’t really notice the venom symbol on my figures scratching off but I will definitely keep an eye out for that go ahead I thought your video in time that said the only major issue I noticed was agonies head being kind of tough to get on but after some filing some heating and cooling and even a little bit of lubricant mine works just fine that said the biceps on both my agony and riot and even one of the calf rotations on my right or super gummy out of package and I had a replacement ordered to swap some of the limbs out and now I am not having as many problems as I was before so I definitely think Hasbro needs to step up their quality control because with three price increases in the span of 12 months there is no excuse for quality control is bad is that that said that really sucks about your mortgage figure having to write thighs been there done that thankfully not with a crowdfunding campaign exclusive figure but it does suck especially when you can’t just simply swap the piece out that said I did not get the galactose figure so I am missing out on not only him but that awesome looking mortgage figure been trying to find one for a decent price but doubt that’s gonna happen that said I’m glad you put this video out because not a whole lot of people do stuff like this keep up the great work man will definitely check out your venom three pack review shortly😊

[@domenicliparoti5792]

Is the venom issue really a QC issue or you just over doing it?

[@thomasvanger5644]

And Hasblow bites the dust again.

[@morkymoose9590]

Good thing I dropped this line. Windowless package then they don’t even take care of their QC.

[@Xmanny87]

I understand. I know you ain’t the only one.

[@FoxsDumbSeriesMaker]

If the ab crunch scrapes up the paint like that for Venom's spider logo, then they should have made sure the ab crunch didn't go all the way down. Hasbro has done this before with their ab crunches and they had the Animated Venom for around a year now. This should have been preventable, but like usual, Hasbro screwed up. When I first heard about this, I was worried because this 3 Pack Venom is supposed to be my go-to Marvel Legends Venom. For figures that have articulation and are meant to be posed, this is a big issue. One wrong move and that logo is getting scratched up. :/

[@Xmanny87]

Yup. I’m afraid that I’ll forget about it one day and end up scratching it by that one wrong move.

[@FoxsDumbSeriesMaker]

@@Xmanny87 It's a shame, because it's a really cool Venom figure. I recently bought the first Hasbro Marvel Legends Venom for the head sculpts, and the white paint on that figure was well applied and durable, much like the one you showed on the second Marvel Legends Venom. My copy was used, and it still looked good. I understand that those Hyperion Venom figures didn't have consistently good paint jobs and could look fuzzy, but it would have made way more sense to apply that paint more cleanly rather than use this new white paint. It almost seems like whiteout in the way it's applied and how it can scratch off.

[@ProfessorHurt]

Um.. that Mindbender's mustache doesn't look fully painted either.

[@gianlucabongarzone4372]

Amazon exclusive gorr his right leg is perfect but his on his left leg the boot rotation doesn’t line up with the rest of the leg and you see bare gappeg

[@jonathanhampshire6856]

Wow some appalling QC issues there. Just wondering where you got the extra Morg X-Manny. I've had a knee and thigh joint shear off on Marvel Legends Iron Man 2020. Thigh joint sheared off on King Cobra plus the replacement I bought. Elbow snapped on Black Series First Order Executioner. I nearly busted the hip joint on my GI Joe Breaker (with RAM Cycle. I carefully removed him from the packaging, tried moving the leg and stressed the peg. Those drop down hips are rubbish. They add hardly any poseability and are weak as Hell. Now any frozen joints get a hot water bath. Sorry to see the damage to your Dr Mindbender.

[@Xmanny87]

Ouch! I backed 2 Galactus Haslab’s because I want to try to make a Celestial out of him. That’s how I got my extra Morg.

[@averageyoutubecommenter1760]

Have you thought about the idea of trimming some of the torso plastic so it wouldn’t chip the paint?

[@Xmanny87]

Yes but that would ruin the paint work on the torso.

[@averageyoutubecommenter1760]

Maybe paint those areas over in white so it stays consistent?

[@chrisjordan8109]

Get'em X, get'em

[@Xmanny87]

💥🥊

[@SENTRYproductions]

I had that issue with my Stalker joe figure, i just heated up the legs and pulled them off and used a dremel to sand the bumps off of the thigh ball joint. That gives the thigh more space to move the leg up and down with out it being too loose. It sucks we have to do that with some figures but its a simple fix i believe that takes less than 5 minutes. Great vid Manny!

[@Xmanny87]

Thanks for the heads up. Haven’t opened my Stalker and still need to open a ton of Joes I have in the box. Now I will apply this shock oil on every Joe without hesitation.

[@GeezyCE]

People receive a figure full of issues, say some shit in forums and then buy another one... I mean, it's obvious why Hasbro don't fix this

[@AlphaProto]

People enjoy Xmanny87's Top 10s because they respect his opinions.

[@CineflickProductions]

Brooo the pain of computer crashing while your editing I’ve definitely had that happen sometimes filmora just can’t handle stuff 💀

[@Xmanny87]

Not sure if it was Filmora. I just had a failed hard drive and had to buy a new one. But I wouldn’t be surprised. Did it make your computer overheat at times? I have a gaming laptop so I know these laptops are prone to overheat.

[@CineflickProductions]

@@Xmanny87 I have a windows surface pro and let’s just say the screen likes to glitch out a lot idk why honestly it’s been happening ever since I updated to filmora 11 and it only happens in that application I wouldn’t say it’s heating up though

[@noelecona7891]

I just bought a VHS Wolverine AND has two left arms... What a mess

[@hrishikeshsaikia476]

These problems sucks to have out of the box. I suggest you buying a white fine tip gel pen for touch ups . I suggest everyone to pick up over time how to do little touch ups . Well me being an artist probably I don't see little paint defects as huge deal . But by no means I support such problems. These qc problems should stop asap

[@Xmanny87]

I’ll look into buying that. Thanks for the suggestion bro.

[@hrishikeshsaikia476]

@@Xmanny87 try uniball white gel pen (can be removed with water ) And posca white marker (also by uni but permanent)

[@BoRerunn]

18 hours for 20 minute video 📸

[@Xmanny87]

Yes. You have no idea the amount of work I put into these videos from high end photography displays to story time, back reading all those comics, editing that story time, filming, editing footage, and some other reshoots I had to do. Lots of behind the scenes that no one gets to see what I do. I don’t do half ass SH!t like some other KZbinr’s. I actually care about the quality of my content.

[@BoRerunn]

@@Xmanny87 trust me that we appreciate it but life is beautiful and very short

[@CAUSEDEATH]

I legit stoped buying GI JOES, got my whole collection on Mecari right now. Fu*k hasbro

[@Xmanny87]

Really? That bad? I only ever ran into the Firefly QC and this Mindbender. The rest of my figures are gold.

[@gimimartinez7080]

Is this what you are using Traxxas Oil, Shock (50 wt, 600 CST, 60cc) (Silicone)?

[@Xmanny87]

Traxxas 1667 30wt Silicone Shock Oil (60cc) but sounds like what you have is the newer 5034 model and that’ll work fine.

[@thatsymbiotespiderman]

Damn it i should of watched this video before i got my venom i hate how the spider paint looks and feels on my venom i love the figure but i wish they used the same spider pait that they used on the retro symbiote spiderman

[@atopineda135]

If you have the opportunity to be able to change it well for you, but the buyers who live abroad and a defective one comes out we have to live with it, because for that dont buy anymore, bad for hasbro.

[@reneeljaiek9430]

I just started collecting marvel legends this year mind you i’ve been a collector for 5 though (sh& mezco only) but i’ve been avoiding the line for this year… and honestly yeah I’m disappointed with the quality. Its frustrating bc ML makes all the obscure characters the other lines don’t make but the QC is sooo trash

[@aram5127]

Those Joe leg pegs are my only issue with these figures, and its a very big one. Received a new cobra trooper a while back, and ripped the leg off at the exact stress line you have there while doing a basic joint test. For an action figure that is most likely going to end up in a kids hand who will punish the figure, its horrible design.

[@kylesagendorf]

My brand new amazing spiderman 60th anniversary has a cracked neck peg. Everything else fine but wow

[@docavenger1560]

Hey manny and to any one collecting some advise when dealing with collectables and collecting when your in the hunt and hunting and your adrenaline is surging and your so stoked you found or about to acquire an accusation or even getting your long awaited delivery what I do is before acquiring or assessing it, I take a step back close my eyes center myself take several deep breaths then slowly open my eyes then look at it with new eyes and with a sense of patients and clam then I can see the imperfections and flaws and then I can make a better more informed assessment’s of what I’m about to acquire, to many times in my youth I’d buy comics or thing and would be how did I not see this or that. And you will be surprise when you look again with a calmed mind all that you can see and understand. Just some knowledge for thought , any way keep up the good work thanks for the tip on the Shock oil and the Venom ab crunch warning, as for the mind bender they should have cold water washed the cloak and let it dry to remove the excess dye it’s more than QC,and Design flaw issue’s it’s greedy laziness they rushed those cloaks in to production

[@jamesbranch23]

Can you contact Hasbro Customer and have them replace Your Morg? It's defective.

[@AKEP43]

I got two of the same galatus faceplates !

[@Xmanny87]

I’ve seen that happen to someone else too. That sucks.

[@frankierivera5451]

My serpentor has a bad paint job smudges on his chest and other places sucks

[@thecollector616]

My Spiderman on that new 5 pack has half a symbol on his back and my razor back has horribly bent and rubbery legs

[@Xmanny87]

Oof! Better get that replacement pronto.

[@frankierivera5451]

What happened to your venom happened to my serpentor but it came like that

[@lostonwallace1396]

Try removing the dye on Mindbenders arm with q-tips dipped with lighter fluid. Lighter fluid evaporates 100% in minutes, without damaging plastic, and it removes paint and smudges on figures well.

[@Xmanny87]

🤔 interesting

[@Dragondude2525]

I want Serpentor so much, if he was a standard release I’d buy him 100000%. But being that he’s in a set with a vehicle and that makes him 130$ Canadian, and I’m only into him for his design and not actually a GI Joe fan, I have to pass. And most likely he’ll never go on sale here. Oh well.

[@Xmanny87]

Ouch! I totally understand if you’re not invested into GI Joe like that. That price is rough.

[@matthewortiz7648]

Dude if I had a fn nickel for every legend I got with 2 left legs &/or feet &/or arms!!!

[@Xmanny87]

That’s happened to me once or twice before.

[@yosepiil8998]

Don't be fooled cooperation can be held accountable. The people that need follows will pimp anything

[@yosepiil8998]

Manny is one that seems to actually make good suggestions and also hold hasbro accountable. Good on you 👏

[@mre4432]

Lmao hasbruhh

[@Lawreviews4651]

The QC issues on most figures is why I stopped buying Marvel Legends.

[@vicdamon3551]

I hate the drop down on the joes

[@furiousstylez8888]

Valaverse! Valaverse! Valaverse! ✊

[@Xmanny87]

I’ve seen a bunch of QC’s on his stuff too. They look cool but I’m not going to invest in military characters I’m not attached to. I’ve been attached to GI Joe since I was a kid which is why I collect the line heavily.

[@furiousstylez8888]

@@Xmanny87 yea I have seen some on Valaverse also I’m not saying there isn’t. Personally mine have had no issues. And overall I think Valaverse quality is far more superior then the joe / hasbro quality. Hasbro shit is all loose and paint apps are usually all fucked up and the plastic is awful. gotta call it how I see it. I grew up watching gi joe. Hasbro needs to step it up period.

[@bobguy89]

Had the Venom thing happened to me, it sucks

[@Xmanny87]

Definitely request a replacement

[@bobguy89]

@@Xmanny87 would i do that through hasbro customer service?

[@GoAwayBrandon]

My Vulcan figure had two right crotch pieces. So his front left groin was actually a butt cheek.

[@Xmanny87]

WTF?!?! How does that even happen? Lol. Sorry man. I hope you were able to exchange it.

[@hunterborne2763]

If you’re too rough with your figures just say that

[@miragexl007]

Ha. They're making it easier to get out of collecting. And/or really back off. Who wants to buy a Misb huge collection.? I Plan on getting rid of a lot of my stuff by spring.

[@kensai6]

You mean abdomen. Spiders don’t have thoraxes.

[@Xmanny87]

Yup. That’s what I meant.

[@Zarharia]

That double right thigh is horrible and should never happen, those other concerns are non issues for me but I’ve been very lucky as I haven’t had really any QC issues to complain about even with all the new windowless packaging.

[@Xmanny87]

Lucky. I envy you a bit lol

[@mrkicker11181]

I know I saw someone on legends group got two left thighs

[@Xmanny87]

It seems like Morg has the most issues out of that Haslab set

[@dboot3887]

If the production process is done de lege artis, there should be no paint problem etc. The company carries the obligation to sell good toys, I suppose this company has been converged, they do not care any more. I am out.

[@jeyeoncho9151]

Maybe They should’ve put the L and the R on the Thigh of morg instead of his shoulders, maybe then they wouldn’t have given you two R thighs smh.

[@Xmanny87]

It just shouldn’t be visible at all. Arms or legs.