{916} i2c LCD configuration with Arduino UNO in Tinkercad

[@carlosandresvergara5176]

Excelente explicación del uso del LCD I2C en tinkercad

[@babybeef1629]

Hi, I'm from Brazil. Your video saved me!

[@HaseebElectronics]

it is my pleasure

[@daslab68]

Great explanation. You went nice and slow so I could follow along. Keep up the good work.

[@jaym5938]

Awesome! You made it look easy. I have some old Arduino's sitting in a box. I should pull them out and see if I can get my LCD to operate.

[@HaseebElectronics]

wish you best of luck. using tinkercad we can simulate Arduino projects easily before assembling physically

[@gitatheegila9089]

this is probably the clearest video out there for an absolute beginner in practical electronics. Great work!

[@HaseebElectronics]

best regards 💕

[@muhammadishtiaq24]

Excellent explain thanks for sharing this informative video

[@HaseebElectronics]

it is my pleasure

[@kausikkar2587]

Amazing tutorial! And love your Pakistani-Punjabi accent!😊

[@HaseebElectronics]

yes i am proud to being a PUNJABI

[@Edmorbus]

What an excellent video Thanks for sharing

[@HaseebElectronics]

best regards

[@blankshyper6905]

thank you so much my indian friend

[@HaseebElectronics]

most welcome dear

[@alexishuanca2660]

excelente vídeo, explicas genial

[@AbdulMomenZargar60]

Good Morning Dear Friend

[@rgneaali1238]

Sir, is there a video about half bridge driver?

[@陳祐昭]

Thanks a lot!

[@triatouria77]

Like may franeds👍🏻👍🏻🌹🌹🌹

[@skyvalex8770]

thank you for this

[@HaseebElectronics]

it is my pleasure

[@alzahrawais]

Hy haseeb-elctonics, this demo was good. I have something to ask, xan you please work on esp32 controller, and make a few videos regarding it. As i am going to do some research work on "AI ON THE EDGE" for my scholarships. I will share my work with you too. Thanks 👍

[@joseeusebiobenavides1570]

The explanation is very good but... there is a problem and it is the same one I have: Why does Tinkercad have a delay time when writing, why does it do it from left to right? In my case: a "for" that should 1 minute does so in more than 2 minutes due to this delay. Because?

[@IrfanAli-so5hh]

Wa alaikum assalaamu warahmatullahi wabarakathuh

[@anishstechlab7323]

Sir can you explain a computer ups circuit diagram please ❤️

[@Pinakisarkar-gd1pu]

Thankyou sir

[@HaseebElectronics]

most welcome

[@rul1175]

Good Afternoon I have a question. When you use a lamp in serial to detect shorts: Do you have another lamp in serial for the oscilloscope? Do you use the same lamp in serial for the oscilloscope? Do you connect the lamp in serial to an isolated transformer? Do you use an isolation transformer for the oscilloscope alone???? Thank you.

[@saydoohan5384]

Hello brother, thank you for these educational videos, which I benefited a little from. Unfortunately, I do not understand your language. I wish you could translate it into Arabic. Thank you

[@newstyle2043]

bro i want to add lcd i2c to a circuit please pleasepleasepleasepleasepleasepleaseplease

[@douglasbernardo1756]

#include LCD_I2C lcd(0x27); const int optico = 2; const int indutivo = 9; int metal; int plas; int total; void setup() { lcd.begin(); lcd.backlight(); pinMode(indutivo, INPUT_PULLUP); pinMode(optico, INPUT_PULLUP); metal = 0; plas = 0; total = 0; Serial.begin(9600); lcd.print(" iniciando"); delay(1000); lcd.clear(); } void loop() { int ind = digitalRead(indutivo); int opt = digitalRead(optico); if(ind == LOW){ metal++; while(ind == LOW){} } if(opt == LOW){ total++; while(opt == LOW){} } plas = total - plas; lcd.setCursor(0,0); lcd.print("Total"); lcd.setCursor(0,1); lcd.print(total); lcd.setCursor(6,0); lcd.print("Metal"); lcd.setCursor(8,1); lcd.print(metal); lcd.setCursor(12,0); lcd.print("Plas"); lcd.setCursor(14,1); lcd.print(plas); Serial.println(total); Serial.println(metal); Serial.println(plas); Serial.println("---------------------------------------------------------------------------------------------------------"); }

[@MarGameING]

tyyy

[@Gamer_Online24]

It is not working in Real life please help me

[@HaseebElectronics]

to design practically, you can watch video number 724 728 802 712 and there are many videos on my channel regarding LCD interfacing with arduino

[@HANNAHLACNO]

thank youu

[@HaseebElectronics]

You're welcome!

[@ashwathnivas1759]

Its not working for me

[@Abdullah-qo6qe]

My address is 32 (0x20) how I am gonna write this?

[@NieMamNicku]

po Polsku mów

[@HaseebElectronics]

mówię po angielsku, możesz włączyć CC, żeby oglądać polskie napisy pozdrawiam