WiFi Robot Tank | ESP32 + Smartphone Controlled 👌🔥

[@aaronalquiza9680]

i like that you tested it on multiple terrains and it handled very nicely

[@hashincludeelectronics]

@@aaronalquiza9680 thank you very much 👍🏻👏🏻

[@FixitEasyDIY]

Just gorgeous! Thank you so much brother. Simple and clear explanation! Great video and editting!

[@hashincludeelectronics]

Thank you for checking out the video 👍🏻👏🏻

[@loverosers9918]

Very Awasome Make A project with Esp8266 lights on off with WiFi with mobile App without Over inter net Same like WiFi With Thanks Done a Great Job sir

[@hashincludeelectronics]

Thank you 👍🏻 sure .

[@aiwithpaki]

Jabardast

[@hashincludeelectronics]

Thank you very much 👌👍

[@AkashDas-vx2ph]

Excellent sir

[@hashincludeelectronics]

Thank you👍🏻

[@bohinlink]

Hello, Thank you for sharing your great projects, they are very educational. 👍 I'm looking for a tutorial on the platform you use to create orders accessible from a smartphone. Thank you for your reply

[@davydbar]

Muy buenos proyectos!! quiero experimentar un poco con el esp32 y me es de gran utilidad. Gracias por compartir!

[@hashincludeelectronics]

Thank you 👍🏻

[@TechnoShuvo360]

Nice invention friend...

[@hashincludeelectronics]

Thank you! Cheers!

[@_ccahtlud]

I watched this video and your robot arm video that also uses Esp32. I have integrated both into the jar manually but I have problems with the code. If the two parts are independent, there is no problem, but when integrated, the arm part does not work. Can you help me?

[@hashincludeelectronics]

Please check the code 👍🏻👏🏻

[@_ccahtlud]

@@hashincludeelectronics I have checked the code but only the wheel part works and the arm part does not.

[@Roshni-aBrightnessinLife]

Good job..

[@hashincludeelectronics]

Thank you very much 👍🏻🙏

[@irpia7026]

This is great! Can you also make a video with PS3 controller instead of mobile app🙏

[@hashincludeelectronics]

That’s an awesome idea 💡 It will be easy to control this tank using PS3 controller with throttle and steering. Will make this project soon 👍🏻👏🏻

[@xiaoliangzhu8627]

@@hashincludeelectronics thank you for your job，i had controler car with ps3 controller, i learn make car from your video , you help me a lot, but now i had some problem, 1: the wifi signal of esp32 is not good, disconnected after more than three meters, 2: the ps3controller has the same problem, maybe the ble signal alse not good of esp32. can you help me how to fix it.

[@hashincludeelectronics]

@@xiaoliangzhu8627 to increase the range further we need to connect / solder external antenna to esp32 module. I did not try this yet but you can give it a shot and see if it work 👍🏻

[@xiaoliangzhu8627]

@@hashincludeelectronics thank you, i will try, you give me a lot ideas, i use your code ,and add ps3 controller , and make a app of iPhone , all of them work, so now, we can controller the car with web,app,ps3controller. now you teach us how to change speed with pwm. i hope i can finish it . and i will add connect / solder external antenna to esp32 module. maybe it will work . continue to look forward to your excellent work. thank you again

[@hashincludeelectronics]

@@xiaoliangzhu8627 sounds awesome 👏🏻 stay tuned and keep learning 👍🏻

[@muhammedraed2374]

Hello First of all, I would like to thank you for your wonderful work I would like to add a button to control the lighting. Can you help me?

[@hashincludeelectronics]

You can add it easily . Please check my Robot arm video using smartphone, where I have used buttons as well . That will give you enough idea 👍🏻👏🏻

[@muhammedraed2374]

@@hashincludeelectronics My friend, I do not have experience in programming this for a graduation project, and I am not a specialist please help me

[@muhammedraed2374]

@@hashincludeelectronics Only the part that specializes in the on and off switch for the lighting

[@ikrammert137]

Hi, fisrt of all thanks the video that helps a lot. but I don't understand, is there any way to Connecting esp32 to a network instead of creating a network with esp32

[@hashincludeelectronics]

Thank you very much for your comment . Yea you can do that . Check my video on getting started with esp32 where we have used our home network . 👍🏻

[@VikasBabu_vicky]

can i use my home wifi to connect to esp32 rather then esp32 act as wifi access point?

[@hashincludeelectronics]

Yes you can . You will have make changes in code then to use station mode 👍🏻👏🏻

[@MyVision2.0]

good wrk

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@kpieceemmry3387]

Greatest

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@KnightBear123]

Can i use diffrent wifi? I mean wifi 1 for my car and wifi 2/internet data for my phone can it work?

[@hashincludeelectronics]

You will have to use Station mode in that . It will need code changes . 👍🏻👏🏻

[@KnightBear123]

@@hashincludeelectronics can u make a video about that?

[@LukeAB_34]

Does it matter what current the battery has?

[@hashincludeelectronics]

Yes . If battery has more current capacity then your car will run longer .

[@30phanthithaovy43]

Do you have the line detection code for this esp32? Can I have it please?

[@hashincludeelectronics]

No I don’t have 👍🏻👏🏻

[@alexfernandesportrai]

Hello Sir, once again thanks for the lovely tutorial and code. Could you please do a robot that uses continous rotation servo motors? Will it eliminate the need for H-bridge module? PWM signals could go directly from the ESP 32 to servo? Thanks.

[@hashincludeelectronics]

I have not tried the continuous rotation servo motors . Not sure how the direction of those servos are reversed . However I will try it in coming days 👍🏻

[@alexfernandesportrai]

@@hashincludeelectronics have a look at this video. Its based on arduino with ultrasonic sensor. There is no H-Bridge motor driver. kzbin.info/www/bejne/kKXKaKqdobKmga8&ab_channel=TerminalTwo

[@altairseri]

good day.i just made your tutorial. but i have a problem. when i press forward button and right button. only the right wheel is turning. can you help me with this?

[@hashincludeelectronics]

Please check the connections 👍🏻👏🏻

[@altairseri]

@@hashincludeelectronics already check my connection,i've seen nothing wrong.

[@johncameron722]

Hi, could you run 24v wheelchair motors through the wifi modules? Want to build a bigger tank 😊

[@hashincludeelectronics]

That’s a nice idea 👍🏻. Yes you can use that however you will have to check the current requirement of the motors being used . You might need to change the L298N motor driver according.

[@forfun126]

i cant seem to access the webpage on my phone using pc browser works but only slider info shows up on serial monitor

[@hashincludeelectronics]

Please note that this app works only on touch screen device. Try restarting the WiFi. Also use only rechargeable battery as it will avoid any power issues and sudden rebooting of esp32.

[@forfun126]

@@hashincludeelectronics Yeap smartphone of course haha Redmi note 10 but doesnt work for some reason the motor driver is powered by 4 double A battery and the ESP32 is powered by usb connected to laptop

[@pritam6948]

Will it still work, if I don't add the AsyncTCP & ESPAsync library, cause I saw some videos were they don't add these libraries, will it still work??

[@hashincludeelectronics]

We need this libraries in this project 👍🏻

[@Clarence_13x]

I’m scared to put more than 6v into those motors. I have one with four motors and need a sheild to run it.

[@hashincludeelectronics]

Try to provide around 7-8 V .

[@Clarence_13x]

I ended up using 8 nimh battery box, and this was enough power. I have watched many of your videos and learned much from them.

[@Dasol0246]

Can this be expanded to have a camera and be web controlled

[@hashincludeelectronics]

Yes it can be. You should check out my other video on camera car .

[@YigalBZ]

What app did you use?

[@hashincludeelectronics]

It’s in built in the code itself.

[@sticknick6157]

Hello how do you use 7-8v on esp32? Esp32 only uses 2-3v? Right?

[@sticknick6157]

Sorry 7-12v

[@hashincludeelectronics]

You are right . We can provide only 3.3v or 5v to esp32. So in this project we are providing 5 v to esp32 which is generated by L298N motor driver module . We need to provide 7-12 v to L298N driver module only . Please check the video and diagram 👍🏻👏🏻

[@Clarence_13x]

Do you have dxf file for the wooden part?

[@hashincludeelectronics]

Unfortunately I don’t have it 👍🏻

[@creckstorplayz2172]

A beep sound is coming from the motor driver but they are not working. Can you please help me

[@hashincludeelectronics]

Which battery are you using ?

[@pritam6948]

Btw bro this is a C or C++ language?

[@hashincludeelectronics]

It’s c++ 👌🏻

[@pritam6948]

@@hashincludeelectronics thanks Man💙

[@hashincludeelectronics]

@@pritam6948 welcome 🙏

[@GabrielColvero]

Hello, I did the assembly according to the diagram and also using your code, but only one side of the RC Tank walks. Would you help me?

[@hashincludeelectronics]

Check the connections at other side properly . Also make sure to use only rechargeable battery 👍🏻

[@chaouachibaha2103]

The wifi does not working and when I take off the vin from the l298n the Wi-Fi work What is the problem please?

[@rish241]

This worked flawlessly for a few times, but suddenly I started getting "rst:0X1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)" error. I tried to replace esp32 board but error was not resolved. I further did some digging. The boards are working fine for other functionalities (I tried with multiple other examples) but give error only for wifi. Same problem I am getting with 3 other dev boards. Can you please suggest some resolution

[@hashincludeelectronics]

Are you using rechargeable battery ? If not then please use only rechargeable battery to avoid any power issues .

[@AbdurazekMohammedAbdure]

Please 😢😢can I use esp32 deviktt v1 instead of esp32 module?please please

[@hashincludeelectronics]

Please use the same module as I used in this project to avoid issues 👍🏻👏🏻

[@Rajesh-Roy396]

Bro...I'm having trouble on ledcsetup was not declared. plz help me to solve the problem

[@hashincludeelectronics]

@@Rajesh-Roy396 please install 2.0.16 version of esp32 board 👍🏻👏🏻

[@Rajesh-Roy396]

What should I do now.

[@hashincludeelectronics]

@@Rajesh-Roy396 I have already replied . Please do that 👍🏻👏🏻

[@ashutoshdash1955]

Noiceee

[@hashincludeelectronics]

Thank you for checking out the video 👍

[@ashutoshdash1955]

@@hashincludeelectronics ur welcome gn

[@FaizanHussain-pg5fy]

sir , for me it is showing no ports found, can u pls provide a solution.

[@hashincludeelectronics]

Please try to connect again . Also if possible try connecting to other USB port . 👍🏻👏🏻

[@chaouachibaha2103]

Why you use ENA and ENB??

[@hashincludeelectronics]

ENA and ENB are used for speed control . 👍🏻

[@chaouachibaha2103]

can i use L293D ????????????????????????????????,

[@hashincludeelectronics]

No you can not use L293D in this project as it is . If you want to use then you will have to make those connections and also changes in code . I would suggest to get L298N driver only and complete this project without any issue . 👍🏻

[@chaouachibaha2103]

@@hashincludeelectronics I don't have money to buy an l298n can you help me to do it with an l293d please you are the best

[@muhammadsaifuddin8629]

How to connect with mywifi car ,i cannot find that

[@hashincludeelectronics]

Please check the video for this step 👍🏻👏🏻

[@Prakash_Siva27]

Bro.... I'm ur new subscriber... I need ur help for my final year project.... Just using arduino nano to control the dc 12 volt motor and sevo moto using a antena brooo.. Can you make me arduino code to Control it through joystick... Website also send plz

[@hashincludeelectronics]

You can check my other videos on servo motor control and also different car projects . It will help you finish your project 👍🏻👏🏻

[@Prakash_Siva27]

@@hashincludeelectronics thanks so much bro... Thank u for responding bro 😀😀

[@chaouachibaha2103]

how do you supply the esp32 with power? without USB

[@hashincludeelectronics]

Through 5v pin .

[@rkambojroboteks9262]

Bro Ham Jaise garibon😔☹️😥 ke pass computer ya laptop nahin hai aap esp32 ko Android phone se program Karke dikhao is per Ek special video bnao

[@adibashory4899]

please sir make WiFi car ESP32 Smartphone Controlled+10 switches for led

[@hashincludeelectronics]

Noted 👍🏻👏🏻

[@shadowfighter7085]

Can i do it with esp32

[@hashincludeelectronics]

This project uses esp32 only .

[@robertrooke9588]

Link to purchase the kit please

[@hashincludeelectronics]

Yes it’s there in the description of the video 👍🏻

[@chaouachibaha2103]

I tried it with an l298n and it did not work I have an esp32 wroom

[@hashincludeelectronics]

It should work . Please check the connections again . Also make sure to use only rechargeable battery . Take a look at video properly . And don’t worry it will work 👍🏻

[@multihacker4823]

Can u help by providing the product link?

[@hashincludeelectronics]

All product links are in the description of the video 👍🏻

[@dharmikchauhan272]

Wifi control range ?? 🙄

[@hashincludeelectronics]

I tried around 70-80 ft 👍🏻👏🏻

[@adarshjaiswal7110]

Wifi name is not visible

[@hashincludeelectronics]

Please power the car and then check if wifi is available in phone . Also use the rechargeable battery 👍🏻👏🏻

[@adarshjaiswal7110]

I already given the power. Thenafter the wifi name is not visible

[@adarshjaiswal7110]

I use only rechargeable battery