Hatsan 155 Torpedo .25

[@sklecanda]

Hi, I too have the exact same gun. I purchased mine on a special sale, for $150 at Field supply. I had several issues with mine causing the front SAS bolt to break from the harsh recoil. After several replacement bolts and sending the gun back to Hatsan for warranty repair, I had to custom make a better and stronger SAS bolt and bushing. Now she is shooting very well. I found the recoil so strong, that it damaged two magnum spring rated air gun scopes. (Hatsan 3-9x32 scope and a UTG 3-9x32 scope) So now I just use the open sites. Hatsan replaced the spring piston seal and polished the bore during the waranty repair, so now I'm getting around 818fps at the muzzle! I think is a great gun and extremely accurate, once you get the hold right. I'm now getting 3/4"-1" groups at 30 yards, open sites with Predator Polymag 26 grain pellets. For some reason, this gun loves pointed pellets. I have four (4) different brands of pointed pellets that this gun shoots very well. Thanks again for the video.

[@injairgun]

I have the 105X Torpedo in .25 with the synthetic stock, Mine has the Vortex gas ram in it and it too is kicker lol. I also have the 125TH in .25 spring piston version and that one is putting out just over 34 FPE with the JSB 25.39's

[@terrynb12]

I own the 150 sniper vortex rifle and it is a tack driver. Hatsan definitely makes heavy but accurate rifles.

[@airgundestruction2405]

This will break every scope imaginable

[@Pupixario]

There are some mounts that have a spring to compensate this insane recoil but not sure if it's effective enough to prevent. Most likely it just prolongs the life of the scope.

[@tomlodge1256]

On one of your Hatsan videos, you said you had to move the front sight over in order to keep the sights aligned with the Barrel. I had to put a red dot on mine ( I prefer open) to test it out...since my rear sight is now just hanging by a thread with no windage options... You took yours off and replaced it... could you expand on that for me/us... we can't be the only two... :D

[@mohammadmursalin6817]

These guns are now well over 300 dollars. Most places that had them are out of stock.

[@philiphodge4254]

Great video. 👍

[@phillipmendiola1257]

Nice hatsan torpedo ,lots of energy , kicks pretty hard , a nice underlever springer for a 130 dollars can beat that

[@mrnoname5162]

cool vid. I just bougt a 155... gona take it out on trail tomorrow... no scope

[@airgunnersedge4061]

Poly mags shoot great !!!

[@lawsonrichards1789]

Greetings from wales.uk. what do you think of the hatsan carnivore 30 cal. No chance of it being sold in the UK. Cheers Lawson.

[@airgunnersedge4061]

The carnivore 130 is a beast that all my friends absolutely love!!! Surprisingly accurate and is on my want list !!! 😍

[@lawsonrichards1789]

@@airgunnersedge4061 I have the dominator in 22 cal. It's a cracking gun . Spot on the target. Beautiful walnut stock. LOVE it.

[@yaddahaysmarmalite4059]

The 130 in .25 cal is more useful since it shoots a flatter trajectory.After you get used to the recoil and figure out how to hold it, it can be very accurate.

[@techworld5517]

Yaddahay smarmalite have you tried the Hatsan 135

[@jake4194]

@@yaddahaysmarmalite4059 I always thought 550fps was too slow. It's a shame they could get 100 more fps out of it

[@XytorUdahnijR5]

Класс 👍👍👍

[@jeffalessi]

Where did you buy that bad boy? I wonder if they still have any for that price.

[@airgunnersedge4061]

Hatsan USA, I subscribed to their mailing list and they notify me anytime they have close outs or sales....

[@jeffalessi]

@@airgunnersedge4061 TANKS ALOT

[@laurencioschaaf7149]

Magnífico

[@ColeSloth]

Did you ever figure out how to get the front bushing removed and replaced? I have the 150 Sniper and it's the exact same deal. Bit loose in the barrel.

[@airgunnersedge4061]

Yes,it was tough getting the front sight off ,unscrew the barrel handle and a set screw underneath to remove barrel ... it's been awhile since I did it..

[@ColeSloth]

@@airgunnersedge4061 thanks. By "barrel handle" do you mean the lever you grab to load a pellet?

[@airgunnersedge4061]

@@ColeSloth yes

[@airgunnersedge4061]

@@ColeSloth yes, the cocking handle...

[@310smoker]

cool vid man, helpful

[@canalchumboemacao7807]

Like 👍👍

[@slowpokeairgunner4027]

I had their 30 cal, it kicked like a mule, powerful, nice wood, just a monster.

[@ragnarokpriest6700]

This is like .50 cal of springers world

[@jake4194]

I'll buy this gun from you!

[@orazioselfreliance9830]

Hello bro, it is possible to kill a small deer with this gun?

[@humanerror8787]

Does the recoil hurt your shoulder.. How is it a problem..

[@darryljones6129]

Sort of like a 300 win mag. Lol

[@310smoker]

lol

[@armandogonzales9304]

RECOIL?? What recoil. Shooting a Marlin lever in a .450 Marlin Belted Straight Walled Case is RECOIL 🙄

[@АртемМошнин-ь6ж]

Ни чё не понял)

[@jetblack5115]

Scope mounts no good for that gun

[@airgunnersedge4061]

???? It's a one piece weaver/picatiny mount, that thing has no movement at all , on any of my magnum rifles...

[@ПётрПетров-э6ф]

Уже лет под-жопу ! Ненаигрался.🐷

[@lukefarnham2119]

"Shrap-metal" lmao its shrapnel