Hatsan At44 air cylinder leak fix

[@dljrocket4939]

Thanks for video. Second time I have made reference to it for replaceing O-rings in my At44.

[@airgunspestingch.8426]

👋🏾sup brAh! “Sharing is caring “ braddah👊🏾😎

[@cornfields-crosshairs4182]

Love the intro and the exiting of your videos. I see you put my favorite Target that you have in the beginning ringing that Bell!👊😎🛎

[@shooterxchannel8102]

Have a leak with my AT44 too. (on the valve end)Opposite end from your leak. Took me a little time. But it is fix now. 😃

[@rickrazz7136]

Good video. I wish you had a Hatsan Nova with the same problem to demo.

[@airgunspestingch.8426]

👋🏾sup brah! Thank you for the comment bradda 👊🏾😎

[@cornfields-crosshairs4182]

Well alllllllriiight!! Airgun Reviews & Pesting Channel!! I do have some leak-down on my AT44 PA.......looks like I might have to check an O-Ring!! Thanks for the tip brother. I too wish you would have been able to have some close-up shots of what you were talking about... I kept leaning into the screen trying to see!

[@airgunspestingch.8426]

Cornfields- Crosshairs 👋🏾 I’ll have to do a better closeup next video brotha👊🏾😎

[@FirstStateAirgun]

Always a wealth of info appreciate it brother💯😎

[@airgunspestingch.8426]

First State Airgun 👋🏾 welcome brotha 👊🏾😎

[@trevor-bd4kt]

Just wish u could've gave a good closeup shot.

[@airgunspestingch.8426]

trevor5534 👋🏾 thought I was close enough my apologies brotha 👊🏾😎

[@shawndubay4050]

Very good this helped alot. Also I have a damaged plastic seal where the exhaust valve seats and seals. It's a little white plastic disk. Have been trying to find a way to replace it. I can easily get the part but am having a fight with getting the old one out. Or do I have to replace the whole valve?? It leaks even when I try to fill it cocked and no pressure on the pin. My air rifle is a Hatsan At- 44/bullboss. Is a great rifle when it is right. Thank you in advance for any information, help or advice. Might be a good video idea. Would be great.

[@airgunspestingch.8426]

👋🏾sup bruh! Get a wood dowel that is about the same size as the plastic white seal you are trying to remove. Cut down the dowel to the appropriate size where you can take a hammer and tap out the seal brudda 👊🏾😎

[@shawndubay4050]

@@airgunspestingch.8426 thank you my new friend. I will definitely do this. Thank you. I will keep you updated on the progress. It's the original seal/disk so it's pretty stubborn but I'm not giving up. 👍 👊 I love the Hatsan bullboss because it's accurate, quiet decent power and alot more compact than my Airforce Condor SS .25 which allows me to get into better and tighter spots for pesting and hunting.

[@shawndubay4050]

Hey you know what you are such a cool and knowledgeable guy 😎 you just got yourself a new subscriber and friend.

[@airgunspestingch.8426]

👋🏾sup bruh! Appreciate it brudda 👊🏾😎

[@shawndubay4050]

@@airgunspestingch.8426 your welcome.

[@geojohnson5613]

Thanks for sharing Ken. I have a couple of questions. First, after dipping the reservoir into the water, could there still be a bit of water remaining that would be forced into the tank when you pressurize it to full pressure? Secondly, are there O-rings on the other end of the tank that can possibly leak as well? If you ever do a complete tear down to replace the O-rings in one of your PCPs, that would make a very interesting video. Hey, how did you like that chair blind that Aaron just did the review on. Now that looks like a great idea. Take care. 👊

[@airgunspestingch.8426]

Geo Johnson 👋🏾 there is a small hole where the full probe goes into. If any water goes into the tank it is a minuscule if not at all. There was not any rust water or corrosion in the valve or tank because I have a good inline water trap. If I will do a tear down on a pcp I will consider it. I have not seen the seat you are talking about brotha 👊🏾😎

[@geojohnson5613]

@@airgunspestingch.8426 Aaron just posted a video on the camo tent chair yesterday. Someone was really thinking. I could use something like that for pesting those sparrows out back. $99 is not too bad.

[@Dadolphinsmakemecry]

Ha ha ha,found the video I needed to take apart the fill port did all you did and then found it was leaking as well from the hammer pin area....the hole that the air comes out as the pin is depressed? Well it leaks there as well so I took it apart too didn't see anything wrong but it feels like it's got an EVER so slight bend in the pin can't see it but it is leaking so I attempted to take the o ring off it snapped. So I'm kinda at a dead stop now,can't really think of a way to see if the pin is actually bent or not if it is no point in hunting down an o-ring for it just order a new pin.

[@airgunspestingch.8426]

👋🏾sup bruh order new pin and o ring together brotha👊🏾😎

[@airgunspestingch.8426]

👋🏾sup bruh. Welcome to the dark side! Pcps are fun till they spring a air leak lol

[@Dadolphinsmakemecry]

@@airgunspestingch.8426 even more so when you only have 1

[@airgunspestingch.8426]

@@Dadolphinsmakemecry 👋🏾sup bruh need to buy more guns brotha 👊🏾😎

[@Jamie-bg8yw]

Will that works with the FlashPup QE. My have the same problems? Thanks

[@airgunspestingch.8426]

👋🏾sup bruh. My flashpup hasn’t leaked but I’m thinking it’s the same process brotha 👊🏾😎

[@Jamie-bg8yw]

Cool...

[@markpomeroy-b4j]

added water into your steel cylinder ??

[@airgunspestingch.8426]

👋🏾sup brAh! The air forces outward not inwards braddah👊🏾😎

[@tau_tv]

what if the leak is from the other side? how do you fix that?

[@airgunspestingch.8426]

👋🏾sup bruh you mean the breach side brudda 👊🏾😎

[@CIintB3ASTW0oD]

how'd you get the end cap off so easily?

[@airgunspestingch.8426]

👋🏾 unscrews bruh 👊🏾😎

[@CIintB3ASTW0oD]

@@airgunspestingch.8426 lmfao thanks for the reply. Ive tried a vice and an electric-taped screw driver and I can't get it to budge.

[@airgunspestingch.8426]

@@CIintB3ASTW0oD 👋🏾 the cover for the fill port right?

[@CIintB3ASTW0oD]

@@airgunspestingch.8426 the actual part you unscrewed by hand in the beginning of the video.

[@airgunspestingch.8426]

@@CIintB3ASTW0oD 👋🏾 the gauge/ fill port cover is the first thing you have to remove to expose the gauge. Is that what you are having trouble with bruh

[@alexbarredo1399]

nice one

[@airgunspestingch.8426]

alex barredo 👋🏾 thank you for the comment brotha 👍🏾😎