Haupon TM-73Mini Perfect for Small Jar Size Paint | 合鵬TM-73Mini

[@acdlcommerce7617]

Hello, can TM-500 also be used with polyurethane or 2component epoxy based coating? thank you!

[@Haupon.Sprayer]

Hi! Yes, TM-500 can be used with polyurethane and 2 component epoxy. But for 2 component epoxy based coating, please finish the project before the resin is cured because it is mixed with hardener. And the sprayer must be cleaned thoroughly after use. Thank you!

[@acdlcommerce7617]

@@Haupon.Sprayer Thank you! For my reference, what chemicals and/or finishes CANNOT be used for the TM-500?

[@Haupon.Sprayer]

@@acdlcommerce7617 You're welcome! Just make sure to avoid the use of strong acids, strong alkalis and flammable materials. By the way, When the spray difficulty happened (motor is running but paint doesn't suck from the container), you can follow the instruction p.8 figure H to clean the 2 vent holes, which are on each side of the paint tube by bamboo skewer. The spray difficulty of TM-500 usually due to dried paint stock the vent holes. Thank you!

[@acdlcommerce7617]

@@Haupon.Sprayer by strong chemicals you mean solvents? Not paint/finishes?

[@Haupon.Sprayer]

@@acdlcommerce7617 Yes, we don’t suggest user to spray ‘a lot of’ solvents because they are flammable materials. But there is one exception that would be okay for spraying solvents, that is, when you finish your oil-based paint project and want to clean the sprayer, you can fill small quantities of solvent into the container and spray into a second container until the solvent coming through the sprayer is free of material. We don’t suggest user to spray sanitizer either, because sanitizer is flammable materials too, For paints/finishes, TM-500 is with fixed size spray tip (2.0mm), so it is not good for some HIGH VISCOSITY paint, for example, glue, water-based flexible cement, ‘acrylic’ latex paint, stone-like texture effect paint, etc. TM-71 is more suitable for spraying those high viscosity paints because it can change spray tip size. Thank you!

[@apotessar88]

請問如果要噴汽車包圍要選那個型號好？

[@Haupon.Sprayer]

您好，噴汽車的話建議使用TM-71或是TM-73喔! 兩款結構經過改良，噴出來的霧化效果會比較好~

[@apotessar88]

@@Haupon.Sprayer 請問 71 跟 73 有什麼分別呢？ 我想要用1.3mm啲噴嘴

[@Haupon.Sprayer]

@@apotessar88 可以哦! 噴汽車的話我們也是建議使用1.0mm或是1.3mm的噴嘴。 TM-71與TM-73的最主要差別在於油壺容量的大小，TM-71是1100ml, TM-73是300ml, TM-73因為油壺容量小，所以如果有調漆需求時會比較節省塗料。 另外，TM-73因為槍體比較小的緣故，所以使用時拿起來手感會比較好，重量也會比較輕。 另外TM-73內附逆止閥，可以防止塗料逆流，但在TM-71中，逆止閥是選配零件。(TM-71及TM-73逆止閥的規格不同，無法共用) 兩者商品各有好處，您可以依照您的使用需求來做決定。 謝謝~~

[@apotessar88]

@@Haupon.Sprayer 再想請教一下，不知度1.3mm噴咀噴出來的橫幅有多闊？還有你們噴槍的電壓都是110v嗎？如果在220~240v的地區要買中國內地版嗎？ 真的很感謝你這麼詳細的回覆。我家地方太小，沒辦法添置大型空壓機，你們家的噴槍實在是十分合適，謝謝你們開發了這麼棒的的產品，請繼續努力！

[@Haupon.Sprayer]

@@apotessar88 噴幅的寬度是依照風嘴而定哦! 我們有"黑色風嘴"及"藍色風嘴"兩種，藍色風嘴噴出來幅度會比較寬，黑色的比較窄， 但實際數值可能沒辦法提供，因為這跟您當下調的流量大小、槍拿的遠近，以及塗料的濃度都有關係。 (在台灣的話TM-73是只有黑色風嘴，TM-71是兩者都有，但台灣外的地區就要看當地的經銷商怎麼搭配，所以您在購買的時候可以問一下店家，內附的風嘴是什麼顏色) 我們的噴槍在台灣店家買的話都是110V喔! 如果您要在220V的地區使用的話，可以直接向我們購買，我們這邊可以幫您組裝一台220V~240V的噴槍~(或者直接在中國內地購買的話也會是220V~240V，但中國目前只有TM-71，沒有販售TM-73) 不客氣，很高興能回答您的問題，也非常謝謝您的詢問以及支持! 我們會繼續努力!! 謝謝~~