www.haydenbuil... This is an overview of the Hayden Built LS Swap kit for a 97 to 04 Dodge Dakota.
Пікірлер: 41
@macsgarage3 жыл бұрын
I will try to answer these question however it is not my product and the offerings are evolving over time. Please check out www.haydenbuilt.net/ for current information and a contact form direct to the business.
@mackjar66 Жыл бұрын
Are these still being made?
@EdwinSolla2 ай бұрын
Hi where I can get the swap parts for motor mount. I have 99 Durango and have the LS 6.0liter and have problem to fit the motor in the wagon. Thank you
@JoseCarrillo-un3gg4 ай бұрын
I have a 2003 Dakota v8 5speed I want to swap a ls can you send me the Paige so I can Oder parts from you please
@edwardrodriguez19092 ай бұрын
Are you selling the motor mounts if so where can I order them. Im doing an LS swap in my 01 dakota
@papasavage82474 жыл бұрын
Dude I got some questions for you. I did this swap long before you did but how in the hell did you use the stock canbus gauges with LS? How can I get up with you. I LS swapped a 4 door 4x4 2001 Dakota went from 4.7 to 5.3 and a 4l60e and a NP231c. I have a good bit of info on the 4x4s but I'd like to hear from you on your build maybe help me on the technical side. Ive had mine swapped for over 2 years started back in 2017.
@papasavage82474 жыл бұрын
Hell my Instagram add is kimbrocustoms Anyone with info or looking to trade some information on the dakota LS swap hit me up. I'd love to use my stock gauges in the dakota. I blew a transmission later found out it was due to a pocket that developes between the transmission and transfer case for whatever reason. Got that sorted but im having some troubles with the shift linkage and the gauges. I only have drive no 3-2-1. Just be so nice if I could get some extra help and info I put so much money in the truck and I hate to give up on it. It was a super fun truck to drive but I lost a lot of will after that expensive blow up. 10k invested into a truck worth about 3k that I cant even drive without being afraid of something fuckin up
@joseph_the_human3 жыл бұрын
@@papasavage8247 If you fix your problem please post it here. I want to do a swap like this and Id like to know about the curtain problems to overcome. Thank you!
@mobius-15032 жыл бұрын
I see this mech eng douchy dude doesnt answer but def would be happy to sell you shit..Im intrested myself in starting this project I love my dakota what sucks is the support for options is extinct.
@slayemalloutdoors19733 жыл бұрын
I plan on ls swapping a 4 door Dakota and straight axle swapping it, how is the fitment on a 4l60e and transfer case ?
@biggesmalls446 Жыл бұрын
So where would you get some motor mounts for a 01 4.7 4x4 crew cab
@122amazonls52 жыл бұрын
Are they still selling these kits
@zachmorrow64213 жыл бұрын
What radiator did you use for your swap
@mustangjustin012 ай бұрын
It want let me open the link
@CharlesPaich7 ай бұрын
Send me a link if can please.
@CharlesPaich7 ай бұрын
Hello, Thank you for doing this. I wanted to do an LS1 coil swap on my 5.9 factory Dakota to get rid of my distributor. What is the best way to do that.
@jacobfalkenborg5174 жыл бұрын
What upper radiator hose is that
@edwardrodriguez19092 ай бұрын
I tried the website with no luck is it still up and running
@macsgarage2 ай бұрын
@edwardrodriguez1909 I don't believe it is currently available. I know he is a member on some dakota groups online but that is likely not all that helpful.
@frankguerra33143 жыл бұрын
.Mac I am doing the same swap.but I am having problem doing the motormount...how did u do it.i need help.
@frankguerra33143 жыл бұрын
I have put the 5.3 in my 01 dodge Dakota.an I can't get it to start.i have the original wire harness an pcm.i change the cam an crank sensor.still foresnt start.ot cranks no start. No spark no injectors plusing .it's getting fuel to the rails..57 psi .it holds for a long time .12 vts on my very injectors with key on.the ohms are 2 to 3
@davidwachter2133 жыл бұрын
Vsat has to be unlocked
@colemansmoney3 жыл бұрын
Where did you get the motor mounts for from
@macsgarage3 жыл бұрын
www.haydenbuilt.net/
@austin_94gt182 жыл бұрын
Are kits sold for the 1st gen trucks? I have a 1994
@Jmunoz1675 Жыл бұрын
I'll take a set of mounts
@tkxew1313 жыл бұрын
Ik I’m late but would the GM LS fit in my 2007 Dakota Lamrie
@ickyiceful3 жыл бұрын
Yea you could put wings on it and make it fly for enough money to something this requires lots of custom fab and a high mechanical skill level theirs gonna be a lot of custom work these mounts just get you in the door
@JayPlays7923 жыл бұрын
Will this work for durango 2000 4.7??
@timisaiah90102 жыл бұрын
Yes 2wd www.haydenbuiltllc@gmail.com
@Bajaheat3 жыл бұрын
What did you do about driveshaft
@b3inc7584 жыл бұрын
Do you have a link to the ls6 clutch kit u used?
@anthonychilders92732 жыл бұрын
I would like to have a set of those mounts how can I contact you about them
@macsgarage2 жыл бұрын
There is a link to the companies website in the video description.
@maxtoyz57673 жыл бұрын
Do you think these will fit 2nd gen rams aswell?
@macsgarage3 жыл бұрын
They do not have a kit for the ram at this time.
@davidneese4378 Жыл бұрын
I tried to get on his website but once there you can't check out any parts or anything. Give me some contact info for him.
@macsgarage Жыл бұрын
His contact information is on the website. He is not selling them in a normal retail fashion anymore but sounds like he'll be doing a group buy in the spring.
@levihill8827 Жыл бұрын
Website is not working. Is that group buy still happening?
@davidneese4378 Жыл бұрын
@@levihill8827 I get the same thing on the site. I even sent an email to him and never got a reply.