Рет қаралды 12,764
How to Repair BMW CAS4 if Killed by OBD Downgrade?🤔
How to fix corrupt Pflash or Dflash?🤔
cas4 5M48H BMW F10 corrupt data ?🤔
Program BMW CAS4/CAS4+ Key Learning
key renew and programming 👍
take donor CAS, virginize the keys or add new key
d-flash corupted
Here comes similar problems:
Problem 1:
vvdi2 killed my CAS4. How to fix corrupt flash?
The car is F10 from 2013.
I was trying to make a spare key today using new option in Xhorse VVDI2.
To do that the tool has to unlock the CAS unit but with my version first it asked for upgrade. So I started
the upgrade and the time error showed on the 2nd level of flashing.
I tried several more times but no luck. How to fix corrupt flash?
Problem 2:
I was trying to make a key today using vvdi2, when updating the CAS its good, but when add key the car not start, I tried several more times but no luck. How to repair the unit?
Solution:
Your P-flash is corrupted.
Try to program P-flash. upload another flash from the processor with the same number and then upload D-flash. and everything will be as before.
A lot of procedure can do but you must have other tools like cgdi bmw, hexprog auto hex, ista+ etc.
Or send eeprom and flash to experts who can dump a good flash.
For example:
1). Problem solved by flashing original back up on donors cas.
2).
Started from CAS4 -create all data from scratch. Flash updates to couple of units (with ista+).
Car is alive again.
All works.
Another CAS4 failure after odometer correction.
Problem with bmw cas4+ module, after mileage reset with cgdi, keyless/remote does not work anymore. I can start car only with key put near steering column. Now cas shows its using frequency 16983 instead 868, when i try to add key it shows me message that current key frequency does not match. Ive tried restore coding, reflash/update with esys. no luck, i think my dflash is corrupt.
Problem solved, repaired frequency in dump and added key and all ok.
Disclaimer:❗
Due to factors beyond the control of Sam Car Diagnostic, I cannot guarantee against improper use or unauthorized modifications of this information. Sam Car Diagnostic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sam Car Diagnostic recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Sam Car Diagnostic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sam Car Diagnostic.
Haftungsausschluss:❗
Aufgrund von Faktoren, die außerhalb der Kontrolle von Sam Car Diagnostic liegen, kann ich nicht gegen unsachgemäße Verwendung oder unbefugte Änderungen dieser Informationen garantieren. Sam Car Diagnostic übernimmt keine Haftung für Sachschäden oder Verletzungen, die aufgrund der in diesem Video enthaltenen Informationen entstehen. Verwenden Sie diese Informationen auf eigene Gefahr. Sam Car Diagnostic empfiehlt sichere Vorgehensweisen bei der Arbeit an Fahrzeugen und/oder mit Werkzeugen, die in diesem Video zu sehen oder angedeutet sind. Aufgrund von Faktoren, die außerhalb der Kontrolle von Sam Car Diagnostic liegen, begründen keine in diesem Video enthaltenen Informationen eine ausdrückliche oder stillschweigende Gewährleistung oder Garantie für ein bestimmtes Ergebnis. Alle Verletzungen, Schäden oder Verluste, die sich aus der unsachgemäßen Verwendung dieser Werkzeuge, Geräte oder aus den in diesem Video enthaltenen Informationen ergeben, liegen in der alleinigen Verantwortung des Benutzers und nicht in der Verantwortung von Sam Car Diagnostic.
ارجو ان ينال اعجابكم
تعلم كهرباء السيارات