degrading card data extraction process step by step

for data recovery call: 855.366.4232
or request your service here: www.hddrecovery...
Data recovery software PC: www.r-studio.co...
Data recovery software Mac: www.r-tt.com/?J...
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: www.hddrecovery...
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2020 my gear for soldering:
I record all my videos using this HDMI Switcher: amzn.to/31LCsq6
Green inspection light amzn.to/2DFJoYu
Platter extractor: bit.ly/2YhQD2y
Momentary foot pedal switch amzn.to/2OSqjZF
Vacuum pump amzn.to/364XWxa
Cleanroom wipes: amzn.to/2ZLj49G
Programmer amzn.to/2DRjL7a
Quick pogo pin adapter for eepROM amzn.to/33TYVyO
Microscope: amzn.to/2rqWcwr
Vacuum chip pickup tool: amzn.to/2tNCSxc
Multimeter: amzn.to/2EHKAxO
USB volt/amp monitor: amzn.to/3CqLRmc
Microscope camera 21mp 60fps 1080P: amzn.to/2Rb5cUq
JBC precision soldering iron and tweezers: amzn.to/33MACm8
Hot air station: amzn.to/2K7Mztk
Infrared preheater: amzn.to/2rYCH1c
Fiberglass scratch pen: amzn.to/3uHIGUp
Flux dispenser: amzn.to/2spLw4D
BEST Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Solder paste for BGA reballing: amzn.to/2LrKQCi
NAND BGA rebelling stencil amzn.to/33Oq9a5
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2Ficg9o
Lens on big camera:amzn.to/2Cx3fGw
this video: • 3 best data recovery h...

[@pdrg]

Loved this structured / how to *and why* kind of video, meant I could be invested in the story more than abstract fixes. Wonder if you've ever "done" specialist cards they use in professional movie cameras, how they differ, etc. There's huge opportunity in rescuing data from those as reshoot costs can be gigantic and the insurers will pay almost anything!

[@hddrecoveryservices]

yes, I worked all types of cards. Hi end cameras like RED and stuff use cards that run SSD controllers. Recovery from those is not much different. I have footage from one of those I may publish tonight

[@danielpetersen2147]

The 30 in 30 is a real gift. Thanks Erkin.

[@DesignerMix]

Does that mean that on 1x speed on pc3000 it give same image that ezjtag give? And as you siad we as viewers can suggest - i'm intrested in - if someone use microsd on new android phone save pics on it and then microsd was formatted by the phone what will happened? I have no phone with microsd (i have old iphone 6), so i can't check it, but i seen card that was formatted by phone and in r-studio or pc3000 flash dadpter (raw recovery) it show nothing but new data which was creating by phone (i mean folders and stuff that phone add by default) no sign of old data. I found out that maybe formattin in the phone tell controller not to show old data (translator) but they can be still accessible by directly nand reading. Sorry if i explain what i mean not too good

[@Digital-Dan]

Thanks. I'm getting a more clear notion of how you proceed.

[@adamw.8579]

Seems as worst case - perfectly working controller with degraded/weared flash module. Sometimes power voltage changing may improve readability in that case.

[@asimabbas1988]

Can I change the laptop hard drive platter to another same hard drive, I have a 500 gigabyte laptop hard drive. His head makes a noise. So, should i change it or not

[@hddrecoveryservices]

Definitely not if your data has any importance to you. This process is more than just a mechanical swap. Get professional help

[@laboratorioassembler]

Very very thank you for your videos :)

[@gabrielalmaguer6292]

In the last moment of the video it said that it would take 1 1/2 hour, was that correct?

[@josearrasola7236]

Hello sir , I’m the one who works on recovering data from phones ! When I first seen you inbox that pc-3000 flash I was think will this work on old nand Chips ? If yea where can I get one I tried every source and noting ?

[@rdp8545]

Amazing as usual my friend. I only wish I could afford the gear you have. I really want to get into data recovery mainly for forensic data recovery. I may need to sell both kidneys to get the equipment and then an arm for training. One arm would still be workable right!? lol.... What I would love to see if possible is data recovery from an iPhone or Android phone if someone intentionally smashed it to avoid us recovering what would have been sensitive information. Have you done a video like this before? I went through your list and couldn't see one?

[@hddrecoveryservices]

You don't need to get it all at once. One thing at a time. I started with very little but the job pays well and tools pay off fast

[@sintaxera]

Love your vids

[@chandigarhdatarecovery]

Erkin , I was in the village and i will be pouring my suggestions for all your videos.There are Two models of Easy JTAG ,The older EASY TAG and the new Plus Version ,I have the old one and never put it to use much ,I used to resell it lolz ,Anyhow what do you have ,You seem to have a good cloning speed in x4 mode in PC3K Flash ,Why was x4 and high speed atleast what you used in PC3K Not used in Easy JTAG Tool you have .Deepspar Stabiliser Seem to be doing a very poor job for this case .

[@DiskTuna]

"Deepspar Stabiliser Seem to be doing a very poor job for this case". It didn't, or did you see the USB connection drop at any point?

[@hddrecoveryservices]

Usually, stabilizer is amazing for these degraded cards, but in this case i was stalling. I need to update the control panel :)

[@chandigarhdatarecovery]

@@DiskTuna Well,the point is not its dropping the device its about reading sectors ,As it access data using usb protocol it cannot have control over connection speed x1 and x4 and also no control on speed like 1mhz etc ,PC3K and Easy TJAG and Devices Similiar To Easy JTAG are the Go To Devices For these kinda products ,The Transcend SD to USB Adapter is doing SD to USB Conversion in this State And Both The Tools Mentioned Bypass That Issue .

[@chandigarhdatarecovery]

@@hddrecoveryservices update it it will still not work try it

[@DiskTuna]

@@chandigarhdatarecovery "it cannot have control over connection speed x1 and x4 and also no control on speed like 1mhz etc" Exactly, it can not do that. Does not mean it does not do it's intended job is my point. "The Transcend SD to USB Adapter is doing SD to USB Conversion in this State" Tell me something I don't know.

[@gurhanbayr5080]

Erkin it was very much revealing thanks and cont on 30/30

[@jrtech3165]

Great Videos!!!!

[@Josh.Straughn]

First Time i saw EZ Jtag Very cool.

[@hddrecoveryservices]

simple and easy to use, not expensive either. Supports NAND protocol also, but I never used it for that.

[@DiskTuna]

Easy JTAG looks interesting, I never considered it.. You probably know but I do not see you try because perhaps you want to demonstrate Easy JTAG: Sometimes I get these to work on Stabilizer too, but you have to force the reader to USB 2 (more settings > other settings at bottom settings TAB), indeed make sure it's set to SSD/Flash Device and set read time out to some ridiculous high value like 10 seconds. Also make sure speed optimization is set to most conventional value. And I go don't go through PC3000, just use anything that creates dd type image. And I try this with UFD's too, in fact had one like that yesterday kzbin.info/www/bejne/an2ugamMbK6HeaM

[@vsgaming4619]

cheng freqance 42 MHz and improve read speed

[@volodimirkun]

Man, caring about workflow really pays off big time down the road...

[@hddrecoveryservices]

It does

[@josearrasola7236]

Awesome videos

[@SIPEROTH]

Quite interesting.