It is possible to make your car headlights like new with acetone used by your spouse. Try this using simple materials like acetone, cans, straws, and candles.
Пікірлер: 309
@davidedalleave15 күн бұрын
I wouldn't use a flame to warm the Acetone that is a Flammable solvent. Aliexpress sells the warmer bottle that could do the same work in safety for less than 10$.
@Malpriorvids3 ай бұрын
Considering how we’re being told that petroleum products are killing the planet, car manufacturers are still using single use plastics on their headlights. What happened to glass headlights? They rarely chipped, and were made of a material that can be recycled indefinitely.
@barryredman28033 ай бұрын
5X the price.
@louisxiiii3 ай бұрын
Probalby due to weight and cost for custom shapes for each model. The only one I know of was the Cadillac Allante. Those headlights outlast the car.
@dennislane1003 ай бұрын
Had glass headlights on my old Citroen BX GTi. An impact with a pigeon was all it took to destroy one! And,incidentally,the glass was 5 to 6mm thick! Plastic has flexibility,unlike glass. Oh,and regarding dullness,the (in situ)application of Solvol Autosol metal polish with an electric buffing pad will restore most plastic units to their original shine, and ,should they be lacquer coated,this can be reapplied via a rattle can of clear coat from your local DIY store. Job done!
@rupe533 ай бұрын
you can thank aerodynamic testing, gas mileage, manufacturing costs, and styling. Besides, statistics say it's only the second owner who has to worry about the problems of plastic headlights.
@Malpriorvids3 ай бұрын
@@rupe53 oh, the same problem as EV ownership. Hence why the fallacy of Man Made Global Warming is a myth…..the proof from governments and manufacturers is right there to see.
@markorsrpska72303 ай бұрын
Clickbait.. he forgot to mention that you need to apply a lot of elbow grease as with any headlight restoration method..😁
@notacreativehandle2 ай бұрын
How is it clickbait?
@headlightvideotraining2 ай бұрын
That acetone in the Red Bull can was kind of lame, and holding a candle underneath to boot? Any headlight restore guy who works in the field of headlight restoration has the vapor keddle kit you plug-in. There's no way I'd being doing clients like that with the vapor application. That has clickbait written all over it.
@notacreativehandle2 ай бұрын
@@headlightvideotraining “Clickbait” seems to be a common term just thrown around without understanding this is merely a diy if you don’t have access to or don’t want to buy special tools. Obviously there is a professional way to do it, but not everyone is a professional. If someone wants to try this at their own risk, let it happen.
@mikimoto9924 күн бұрын
Dripping hot wax on a headlight in the thumbnail!!!!! Did you see him do that? Clickbait!@@notacreativehandle
@The_Gallowglass18 күн бұрын
@@notacreativehandle "Headlights are like new with 3 drops acetone" He used a lot more than 3 drops. He had to sand and buff first. Are you mentally incompetent?
@user-qg5sq1iu1k3 ай бұрын
На месяц хватит, а потом снова помктнеют, заводской лас снял, а новый не нанёс😂 красавчик мужик😂 после таких кулибиных фары менять приходится
@emigrant4life3 ай бұрын
ездяй на своем гоффножигуле и не кизди, орчиналаптеногая
@TheEtoil3 ай бұрын
Ничего им не будет, я свои полировал и лак не наносил, больше года прошло
@emigrant4life3 ай бұрын
гуский глас уский
@alex214873 ай бұрын
не все фары лакированые с завода.
@user-yu1et6mt4q3 ай бұрын
@@alex21487 Все пластиковые фары с завода покрыты твёрдым (антицарапковым) слоем! Если этот слой снять, то останется мягкий материал, из которого сделан сам прозрачный корпус - поликарбонат! На продажу конечно можно и так оставить, фары будут блестеть ещё пару месяцев. Но для себя, поверхность нужно покрыть или лаком, а лучше защитной полиуретановой плёнкой! Если этого не сделать, то через год состояние будет ещё хуже! Мы занимаемся плёнками для автомобилей уже более 25 лет, в том числе и фарами!
@ptinker1062 ай бұрын
I saw another video where acetone was in a rechargeable heated kettle and vapors would do that. I bet there are a lot of different ways to restore headlights but a sealant keeps them fresh longer
@user-du3br1tu3x4 ай бұрын
По желтеют за сезон. До 800 чистишь и лаком скрываешь, есть машина которой я делал лет так 5 назад. До сих пор как новые.
@vitmor46533 ай бұрын
Без проф 2К лака и без пряморукого мастера так же пожелтеют
@user-du5fj9kd6q3 ай бұрын
А в чем проблема после такой процедуры покрыть лаком?
@deniszavarzin56403 ай бұрын
@@user-du5fj9kd6q лаг лучше на шершавую поверхность после 800 наждачке, а после ацетона зацепиться не за что. И вообще зачем, если лачить?
@dnbdrak3 ай бұрын
можно пример названия хорошего лака ? @@vitmor4653
@sovridder74293 ай бұрын
Мне фары также полирнули с химией из китайского чайника, а потом сразу в броне пленку закатали. - 2 года полет нормальный.
@colinkelley2856Ай бұрын
When you are finished, if you spray it with two or three coats of clear coat it will last for many years.
Soft blocks, are for contoured surfaces. Hard blocks, are for flat surfaces. Flooding, is the key to every, successful wet sanding project. If there isn't water pouring on it at all times, your dry sanding. If everything was as easy as the internet makes it look, you would have absolutely no need, for skilled tradesman. But you do. And we're making money hand over fist because of these videos. People who don't know. Who pretend they know. And they show you, how to screw it up yourself. God bless you, you KZbin creator. After 25 years of being a auto body repair technician..... I'm finally going to be able to afford a house!
@christopherbrown53383 ай бұрын
1000 grit & water, 3000 grit & water then a polish and that's it. Good as new. I would never advise heating a product as flamable as aceatone.
@cetujavu34662 ай бұрын
This is proven method ..chemical compunds ..works.. Professional use this method or shops use for treatment.. What they are doing is using a actone vapors....which causes chemical reaction... . They sell this kits online.. But once you are done with actone vapor treatment.... You have to apply layer of UV protection.. to make it last longer...
@HeathfloorsАй бұрын
No thats not it.... You need to lacquer them to stop them clouding again...
@samdje100Ай бұрын
He used an orange straw, so it should be fine. That’s we learned unicorn training yesterday.
@MrCbell57Күн бұрын
No that’s not it. it needs to be treated with a plastic coating sealer. To protect it otherwise it becomes exactly like it looked before in a matter of a few months. Ceramic formulas work well.
Quickest way to restore any headlight is to replace them!
@jozefnovak77502 ай бұрын
Super!
@nvpoolshooter3 ай бұрын
I used Hippich Simichrome chrome polish first, then Maguires light polishing compound. About 10 mintues per headlight and about 95% like new again. Easy.
@winandd8649Ай бұрын
Don't forget to coat the lens after this treatment!
@Romiman13 ай бұрын
Doesn't seem being better or simplier than only sanding, polishing and painting* the headlamp-lens. (*UV-resistant clear coat) And why this thumbnail with candle-wax??
@waltp33734 ай бұрын
Acetone is highly flammable and you're using a candle?
@darknes78003 ай бұрын
Kinda cool, isnt it !!!!!!
@johnsposato56323 ай бұрын
Especially acetone vapor. I would never use that technique.
@lifegoaltv33082 ай бұрын
lol
@cetujavu34662 ай бұрын
@@johnsposato5632😂... Professional headlight restore places use this method... ... Once you know how chemicals compounds reacts and works.. You will understand.. Why professional are using this method..
@policedog40304 ай бұрын
I think that General Motors used something like this to polish their plastic steering wheels pre-1970's From Wikipedia: Vapor polishing is a method of polishing plastics to reduce the surface roughness or improve clarity. Typically, a component is exposed to a chemical vapor causing the surface to flow thereby improving the surface finish. This method of polishing is frequently used to return clear materials to an optical quality finish after machining. Vapor polishing works well in the internal features of components. Feature size changes of the plastic component generally do not occur. Post stress relieving is usually required as vapor polishing sets up surface stresses that can cause crazing[citation needed]. Plastics that respond well to vapor polishing are polycarbonate, acrylic, polysulfone, PEI, and ABS. The technique is also being used to improve the surface of objects created with 3D printing techniques. As the printer deposits layer upon layer of material to build the object, the surface is often not entirely smooth. The smoothness of the surface can be greatly increased by vapor polishing.[1]
@sttm12833 ай бұрын
would the same method also work for dull plastic trim around the car? lets say fenderarches/bumpers on a audi a6 allroad?
@policedog40303 ай бұрын
All I know is what I read on the wiki and don't recall where I read about the 1960's use case for plastic steering wheel finishing. These days in the USA the vapors would make such techniques unpopular with the Air Quality Management authorities. The Acetone that I think they used is pretty strong solvent and might just remove any paint.@@sttm1283
@peterduxbury9273 ай бұрын
@@sttm1283A hot gas blowlamp will restore those Plastic Side Panels to new, but you must exercise care, and ensure that all paintwork receives no heat at all.
@claudiosantana13584 ай бұрын
Hola a todos;use acetona para sacar lo amarillento,solo una pasada por cada lado de un trapo de algodón,y luego frote durante 30 minutos,con pasta de dientes,muy buen resultado me dio.
@bv29992 ай бұрын
WTF!!!! Acetone is highly flammable and can ignite at room temperature. Acetone vapors can also create explosive mixtures with air when heated.
@user-kv7nh5ji6w3 ай бұрын
На год, потом пожелтеет. После такой полировки необходимо покрыть лаком для микросхем, продается в магазинах Электронных Компонентов. Этот лак защитить от солнечного ультрафиолета.
@rachmadimadi99404 ай бұрын
Nice
@user-rf7fq6fh5b3 ай бұрын
Волшебник.
@WiFuzzyАй бұрын
last step is easier with uv protectant clear spray. Krylon makes it. And it keeps it clear longer.
@cetujavu34662 ай бұрын
Before anyone leaves another stupid commnets...lol.. Professional headlight restore palces uses this methodd..😂 and this kit being sold online.. . this guy just showed you how to make the kit cheaper using red bull can ..straw..and candel..
@SajadSagafi-wh2kt10 ай бұрын
Harika
@99bx993 ай бұрын
I just use my buffer with 3 grades of buffing compound. Like new in 20 minutes.
@kaikesantos24254 ай бұрын
Muito bom...👏🏽👏🏽
@TrickyDashcam3 ай бұрын
Interesting video, good results. However, I am never going to buy a can of Redbull.
@pjwoo2763 ай бұрын
why not ?
@sineDes743 ай бұрын
@@pjwoo276 потомучто стоит она в России дохера, проще флэш в два раза дешевле😂
@pjwoo2763 ай бұрын
@@sineDes74 English please
@ferminhortelanoserrano11613 ай бұрын
El vapor de la acetona sella el lijado del plástico. Pero después, ¿kizás sería conveniente pulverizar una capa de laca transparente??.
@ramonrosa19193 ай бұрын
que tipo transparente para que dure
@hernannieto43103 ай бұрын
@@ramonrosa1919 pienso en poliuretano transparente (cristal) es resistente al UV. El mismo que se utiliza en la capa final del pintado automotor.
@ferminhortelanoserrano11613 ай бұрын
@@hernannieto4310 Creo ke sería la ideal.
@seecha89703 ай бұрын
First of all, you didn't put a single drop of acetone on the headlights. Second, this process is a whole lot more than your misleading, clickbait title.
@mantisman7603 ай бұрын
The vapour from the heated acetone.
@highonsmog3 ай бұрын
1:44
@exploringgodscountry3 ай бұрын
It is genius.
@notacreativehandle2 ай бұрын
Pay attention genius, nowhere does it say anything about putting drops of acetone directly on the headlight. Good God man, use your brain before making stupid comments
@treborobotaconАй бұрын
Acetone is in the pop can
@scoobysean5553 ай бұрын
Uv safe clear laquer woukd be better ....but this is science at its best
@RicardoSantosAbonicioMar-ti1rzАй бұрын
Vou fazer 😂
@AmazingSmart-ngth3 ай бұрын
Wow, this video is amazing! I followed the instructions and used just three drops of acetone on my headlights, and they look brand new! I couldn't believe the transformation. Thank you for sharing this helpful tip!" Lesson: Sometimes, simple solutions like using minimal acetone can yield incredible results in restoring headlights. It's all about being cautious and precise in application.
@colorbosscustomautobody81402 ай бұрын
In a few months they will be yellow again. You need to apply a 2k clear to protect the plastic from getting etched by sulfur oxides. That's why they look yellow over time.
@IamAli892 ай бұрын
Hey nice to hear that it worked well for you, you did the same as shown in this video or just you rubbed Acetone over the headlights?
@cetujavu34662 ай бұрын
@@IamAli89it's actone vapors.. Not actone poured to headlight.. It will damage the headlight is actone touches.. It's the actone vapors ..causing chemical reaction to plastic... Professional headlight restore places uses this methods..
@cetujavu34662 ай бұрын
@@IamAli89they sell this kits online less than $20.... This guy just showed you how to make it cheaper DYI.
@captnjim44smith743 ай бұрын
There’s a quick way to improve lights, not as good as your method, but quick. Use kitchen cleaner like Comet with a wet towel then get a restore liquid, not expensive from auto supply to finish.
@Skiminok603 ай бұрын
Надо сразу клеить бронепленку.
@user-un5my5bw4j27 күн бұрын
Heres a fact people you can get a better result wet sanding from 1000 to 5000grit, then using a small 3" rotary polisher with compounds and GOOD quality buffing and polishing pads. Second of all holding a flame under a thin aluminum can with acetone is extremely extremely f**king dangerous. Acetone is more flammable than gasoline. A lot more flammable and i do not recommend this because when it goes it all ignites at once going BOOM!!! exactly like gun powder. I know, i paint and do cerakote for a living and old rags used with acetone have turned my burning barrel into a gigantic shot gun a couple times when i lit it and blowing all the trash straight up in the air 20' then landing all around the 55gal drum that is my burning barrel
@AsgharH-vb7mz11 күн бұрын
❤
@gthomer12313 ай бұрын
3 drops acetone and a lot of sanding and polishing
@liftgold822529 күн бұрын
great!
@Jumanji-754 ай бұрын
УФ защита?... 🤔 Не, не слышал 😁
@user-et7rg9cy5s3 ай бұрын
Судя по рукам ещё что то пробывал😂
@user-cc9dl7kc6x3 ай бұрын
結局磨くんだね そんなん アセトンじゃなくても磨いた後にクリア吹けば同じ
@andretraversy93912 ай бұрын
Tank's
@jakerazmataz8523 ай бұрын
If you pizz on them, and use a magic erasure they look like new.
@OsmanGaziPasha3 ай бұрын
Thanks
@v1-vr-rotatev2-vy_vx313 ай бұрын
Try using a sander it'll be so much quicker
@roche17773 ай бұрын
interesting how he can hold the can while heating it up with fire lol
@TR4zest3 ай бұрын
It is only a lighter, the evaporating acetone will be taking much of the heat away: Latent heat of evaporation.
@ozkrpalminteri94314 ай бұрын
That wasn't just 3 drops of acetone, come on
@abrogard1423 ай бұрын
but a few drops on a rag and wipe it on would have done it, too, I think. Fixed mine by wiping. You just have to clean them well first else when you wipe you might bury dirt or grit in the surface.
@user-xc2jk9cp9t4 ай бұрын
좋은정보 감사드립니다
@au9374 ай бұрын
Pakai pemberih cat kuku bisa jua.
@volt86844 ай бұрын
Which is acetone
@user-vu9dx3zx1j2 ай бұрын
Судя по кол-ву отзывов от китайцев, ты им конкретно бизнес испортил :)
@umbertosincero30815 күн бұрын
mit 3 Tropfen Aceton und 2 stunde Arbeit
@marcioceleste7033 ай бұрын
Quer dizer quê foi a acetona e não a lixa pra tirar o verniz que protege o farol. É cada uma...
@chrisallen20053 ай бұрын
How many millilitres are in one drop?
@anatolpieruszka33883 ай бұрын
no i to byłby bomba pomysł ale czy na pwno wyjdzie
@user-wl3pz9jr6s3 ай бұрын
Максимум полгода и всё снова жёлтое. Самое надёжное закрыть лаком у меня на канале всё описано. Сам лично делаю на своих авто.
@troevdomike3 ай бұрын
и на сколько долговременный эффект?...
@paulm283Ай бұрын
The whole world knows the headlamp lenses require us spray.
@desbravatube4 ай бұрын
Selvap! Att: Weliton Marks - Canal Desbravatube
@user-zb7jd6jl7f2 ай бұрын
「垂らしただけ」とは一体・・・?と考えさせられる動画でした。
@juvenalduarte96953 ай бұрын
Essa acetona é aquecida com uma vela? Não vi a chama.
@droneworldbrasilАй бұрын
sim em baixo da lata de redbull
@bicmeat95523 ай бұрын
Maybe the acetone vapor just took care of the entrapped moisture after the washing ?
@cetujavu34662 ай бұрын
Actone Vapor plastic polishing has been used in many industries Professional headlight restore places uses This methods... Kit cost less than $20. But will charge you $100+ for the service...
@zintena12313 ай бұрын
Ну и наконец после всех манипуляций на пару тройку тысяч ..три капли ацетона😂
@MuratS7593 ай бұрын
1 year life time
@rupe533 ай бұрын
acetone has a flash point of -20C so not sure how anyone keeps from starting a fire with an open flame only a few inches away from the vapor.
@williamcope26523 ай бұрын
“The stoichiometric ratio is the exact ratio between air and flammable gas or vapor at which complete combustion takes place.” Just because there’s a natural gas being let out of the swamp doesn’t mean someone else on the other side of the county doesn’t get to smoke a cigarette. Have you ever seen the video of the pale of gasoline that someone puts a welding ark in? The fire triangle states that there’s a source of ignition, and there’s a source of fuel, but there’s not a source of oxygen, regardless, the ratio of the oxygen to the fuel still has to meet the efficient.
@rupe533 ай бұрын
@@williamcope2652 key there being complete combustion... or the ideal mixture for efficiency. Many flammables have a very wide range of combustion, although not ideal. I believe acetylene will burn from a 10% to a 90% mix with air. The sociometric point of gasoline is 14.7:1 expressed as a ratio. I'd have to look up acetone.
@rupe533 ай бұрын
@@williamcope2652 The stochiometric point is for ideal combustion. IOW, least emissions and most power. Gasoline is 14.7:1 but there is a wider range of flammability overall. They are called the LEL (Lower Explosive Limit) and the UEL (Upper Explosive Limit) You also have to consider the conditions where you actually have a vapor to burn. Gasoline has no vapor at around -50F but plenty at room temp. Fuel oil / diesel has almost no vapor till you reach over 125F. IOW, you need the vapor and the air mixture. In this video there's plenty of air so it's a matter of reaching a rich enough mix to go boom.
@cetujavu34662 ай бұрын
Suddenly we have PHD.chemstry scientist. Here.. Telling us.. Lol this method is used by Professional headlight restore shops.... You can buy the actone vapor Kit online.. It's a simple device.. Aluminum can with heating.... To produce actone vapors...
@rupe532 ай бұрын
@@cetujavu3466 not suddenly. it took a few years to get the education. BTW, the video shows an open flame, which is far from professional level.
@michaelgeary59824 ай бұрын
Use brake fluid and job done. But don't get it on the paint work or it will lift.
@mduduzimanyatsi93114 ай бұрын
Really
@braaainz3267Ай бұрын
@@mduduzimanyatsi9311really. I did that to mine and now it's bare metal
@AleksandrSashaborisenko3 ай бұрын
👍
@sergeyivanov47914 ай бұрын
Нужно отполировать и покрыть специальным лаком. Это по технологии. А то что на видео, вариант на 6 месяцев, дальше они снова поцарапаются и станут мутными
@user-wl3pz9jr6s3 ай бұрын
Всё точно но одно но полировать не нужно будет только хуже.
@ivanivanov18753 ай бұрын
Полировка не нужна и даже вредна)) Лак всё сделает )) Вот как заматованную поверхность облить водой, пока не высохнет будет гладкая и блестящая, лак даст такой же эфект только долговременный, а риска нужна чтобы держался хорошо ;)
@Viking2192 ай бұрын
А горелкой не проще?
@grandmastert013 ай бұрын
Couple of hours all the haziness from the sanding will come back
@LygerTheCLaw3 ай бұрын
if acetone wasn't a solvent, this would be correct. acetone is basically melting the plastic lens back to a clear protective coating though.
@ma6netho3 ай бұрын
@@LygerTheCLaw can you just use a hot air gun insted of aceton to melt the plastic smooth.
@deniszavarzin56404 ай бұрын
Защитного слоя нет - очень быстро пожелтеют, в китайской жиже синей есть компонент защищающий от ультрафиолета, а в ацетоне - нет
@sovridder74293 ай бұрын
Я пробовал ацетоном на оргстекле - фигня получается, китайский чайник рулит. После химии обязательно в броню закатывать пока пыль не села.
@ershik123oleg23 ай бұрын
👍🔥💪🤝
@headlightvideotraining2 ай бұрын
I think also that it was quite odd that you would polish the headlight and then applied the vapor acetone. 😆 Polishing is always something done last in the process but is not usually done when applying the vapor application. So that polishing you did was wack.
@jeffreymorrell65742 ай бұрын
He's using the fumes.
@alekoskoulis91463 ай бұрын
Φιλε ωραιο το βιντεο.Εαν μπορεις βαλε μεταγλωτιση στα Ελληνικα.
@nicosgeo3 ай бұрын
Αγαπητέ, η εικόνα μιλάει μόνη της. Το acetone είναι το υγρό που καθαρίζουν το βερνίκι από τα νύχια. Υπάρχει στο εμπόριο παραγγελια από φαρμακεία και σαν καθαριστικό χωρίς χρωστική και αρωμα. Ο τύπος χρησιμοποιεί τον ατμό της ακετόνης σαν καθαριστικό ή σαν φίνις βερνίκι.
@jurgenkarl2903 ай бұрын
In Deutschland ist diese Methode (Dampfpolieren) verboten, da sich die Streuung des Lichtes verändert und zur Blendung des Gegenverkehrs führen kann.
@misterRobbi3 ай бұрын
In deutschland ist furzen beim kacken auch verboten
@lawrencew37032 күн бұрын
Omg there has to be an easer way
@user-xb2cf3fs5h3 ай бұрын
Только на продажу сойдет.
@olivierdumon65423 ай бұрын
Après avoir poncé au 1500 puis au 2000 et enfin au 3000 (grains introuvables en France) n'importe quel polish de bas de gamme fera l'affaire !
@Tempostrom3 ай бұрын
con tres gotas acetona y una hora lijando, jajajajaja
@bluesdawg80143 ай бұрын
Way to much hassle. Use Mothers aluminum polish for a 5 minute fix 100% easy LOOKS GREAT Los Angeles
@bluesdawg80143 ай бұрын
All you need to do is Wipe on Mothers aluminum polish with a cloth and wipe off almost right away with a terry cloth or micro fiber towel. You'll be surprised. Very fast. 😁
@vilmarvieira56134 ай бұрын
Solvente da danos ao plástico.
@babyboi47783 ай бұрын
Agreed
@user-mw5qn7tg3t4 ай бұрын
Благодарю
@bobbarker81084 күн бұрын
*OMG*
@samuelbotella83224 ай бұрын
Habrá que ver cuanto duran así
@Ivan-pl2it3 ай бұрын
3 drops
@FranciscoJavier-mn5nz3 ай бұрын
CON PASTA DE PULIR DE 3 M SIN TANTO CIRCO.
@jankolukacovic44243 ай бұрын
Yes You're, i use ,,pasta de pulir,, and i recoment that. 500x safer like this and the same result. And of course again after 4 months :D
@user-iu6vc3gc2k4 ай бұрын
надолго ???? 2-6 месяцев ???
@vladimirgermanchuk10952 ай бұрын
только стекло спасает!!!!!!
@user-qw8qf1rq1z3 ай бұрын
А как же всего 3 капли ацетона? Так можно и в автосервис отдать.
@kot34553 ай бұрын
Ключевое слово как. Ни кто так не делает. Без лака не на долго прозрачность
@yanovitskysergey32583 ай бұрын
Никогда не делайте так. На пластик нужно нанести защитный лак.
@tonyduong36393 ай бұрын
HOW LONG DOES IT LAST AFTER YOU DID IT THAT IS THE MAIN POINT????
@bluesdawg80143 ай бұрын
Non of them last. Use Mothers aluminum polish easy as heck. Last three months depending on the weather Los Angeles
@cetujavu34662 ай бұрын
This method is used by Professionals.. Actone vapor plastic polishing... Just remember to apply UV coating cream After the treatment...
@cetujavu34662 ай бұрын
@@bluesdawg8014this method will outlast your method... Actone vapor plastic polishing has been used in auto industry... and many headlight restore shops uses this method..... But make sure after the treatment.. You apply UV coating cream...or spray.. Which ever you prefer... You can buy the actone vapor Kit under $20... .
@zoop21323 ай бұрын
Mr. Clean Magic Eraser and 15 minutes of elbow grease every six months.
@johnmurray77673 ай бұрын
Don't leave a drinks can with acetone in it. Either re-label it or destroy it, you never know when a child might pick it up,
@AleksandrKozakov-bk8zp3 ай бұрын
Де береш ацетон?
@Mraeasy-bb1vs3 ай бұрын
It is used to remove nail polish. It's everywhere
@user-cx5ww6zb9c3 ай бұрын
My headlights are discolored on the inside....they never show videos to solve that issue😂