Achieve Stunning Results with 4 Color Heat Transfer Vinyl

[@novalunathevoidcryptid]

All those colors and layers, many of which with very thin lines is impressive! Layering vinyl can be quite tricky, yet you made it look like a breeze. Bravo!! That was amazing to watch.

[@HeartHustlePrinting]

Thanks for watching..

[@JoseAndrade-ke4fz]

Never seen anyone take the time to reply to every single comment. Even the questions that you have already answered 30 times. I appreciate that. Just for that I am subscribing!

[@HeartHustlePrinting]

I do... Every single one. Well I hope I haven't missed any. From one Jose to another Thanks for watching and Subscribing!!!

[@BruceLeef]

@@HeartHustlePrinting 🙏

[@HalfAssHomestead]

Joe, Thanks for sharing your methods of doing this. I have been wanting to, but have held back in fear the carrier sheet could destroy the print already in place. I never would have guessed such little time to set the print under less than full pressure. Thanks Bro.

[@HeartHustlePrinting]

Thanks David. Yeah just give ea color a pre press then on last press press for full amount of time..

[@teambelltraining8958]

As a new person coming in, this video showed the detail and care it takes....I appreciate that

[@HeartHustlePrinting]

No problem. Thanks for watching... Make sure you click the bell if you subscribed so you will be notified when new videos come out..

[@mrcarlo1966]

Even though I do this as a hobby I picked up quite a few tips from this video.Thank you for your time.

[@HeartHustlePrinting]

If you watch more of my recent videos there are more tips. Thanks for watching.

[@richardcolbourne6151]

Really inspired by this. I'm just about to start producing on my Own. Thanks for the tips.

[@HeartHustlePrinting]

Awesome to hear. Im getting ready to do a big giveaway if you want to be axprat of it all you have to do is be a subscriber. Make sure you click the bell so your notified when ill be doing it..

[@LorraineCastellon-Rowe]

You make it all look so easy!! Beautiful!!

[@HeartHustlePrinting]

Keep at it and in no time you will perfect it.

[@TheWorkBench]

Its a lot of work but you can really make shirts pop and very attractive. My first heat press was a 16x20 Stahls from someones garage. Then I got everything else to get going. Its about what people want, creativity and skill that get you far. Siser easyweed stretch is a good way to go and lasts for a looong time vs just the regular. I've had stuff for 10 years and one that I had done 9 years ago on my jogging shorts which was Siser Easyweed Reflective. This is so much fun!

[@K0dexSister]

I was absolutely captivated watching this. Looks brilliant, well done.

[@HeartHustlePrinting]

Good the hear that... Thanks for watching...... KEEP PRESSIN!!!!

[@shieasehorton1753]

Thx for the video. Just getting into this tshirt thing but learned so much especially the way you did a cut-out instead of layering so much easier and saves vinyl. Thx....

[@HeartHustlePrinting]

Awesome!!! and welcome... If you need help or got a question on something let me know... Also follow on IG always posting there also.

[@kendrapope2905]

DOPE! I can't wait to get to this level of perfection.

[@F.Y.Mjaytee3700]

Bro. You are fucken bad ass with your craft! That art work bro on that transparent paper is clean asF. You are insane with it bro. Thanks for sharing

[@HeartHustlePrinting]

No problem!! Thanks for Watching..

[@drrehabdirector4973]

Awesome work! You definitely have a lot of talent. Thank you for sharing your skills with others. God bless.

[@HeartHustlePrinting]

Thank you for watching and kind words Dr. Rehab..

[@MrIge2005]

Layering is awesome! Thanks

[@kovuk9]

That is BEAUTIFUL work sir

[@HeartHustlePrinting]

Thank you!!

[@cherylbrownlifeexposed3926]

Hey H&H... This was one of the first videos I watched when I first started... A couple of years ago!! I use to watch it everyday... Lol

[@HeartHustlePrinting]

Thanks for all the support Cheryl... Look at us now....

[@michellewalker4257]

Please keep making videos thank you for helping people like me

[@HeartHustlePrinting]

I will. Thanks for subscribing

[@octavionoelwilliams7450]

This blessed me so much more then thee others much respect to you sir...

[@HeartHustlePrinting]

Glad I could help. Like I tell everyone let me know if you need help with something..

[@gattonpc]

I don't get something.. How this Blessed you so much. Can i get a onest enswer?

[@HeartHustlePrinting]

Wow... Maybe he didnt know how to do what I did and hes been struggling with getting it. Then he saw the video and now has a better understanding. And now is being BLESSED with 💵💰💸.... Love people like you who fuel the 🔥🔥🔥🔥. Hope this now BLESSES you.... 🎤 drop...... PS: What is a onest enswer???? 🤔

[@gattonpc]

@@HeartHustlePrinting Lool.. That is quite a story.. do you even bellive in what you saying? Is the reality to hard for you to understand? I'm not Blessing anyone with anything.. just bring the reality back in the mind of the people that are to blind to see it. Like you for the start. and the ones enswer is the one you can deliver.. In your case is an enswer from the wrong person. or you can speak for others now? My comment wasn't for you if you didn't noticed yet.

[@trustsalama2807]

You are a legend, period!

[@HeartHustlePrinting]

Thanks for the kind words..

[@ShainaNewborn]

OUTSTANDING WORK! Thank You for sharing!

[@HeartHustlePrinting]

No problem.. Thank you for watching Shaina..

[@_desertwalker_]

Gday from Western Australia. Really nice work mate, thank you for taking the time out to show us the ropes. Really learnt a lot just then. Warm Regards.

[@HeartHustlePrinting]

No problem. Thanks for watching.

[@danialm8122]

This is we call ART.

[@HeartHustlePrinting]

Thanks for comment!!

[@knightride9635]

Beautiful work, I hope you are making some good money because it takes a lot of time

[@HeartHustlePrinting]

It does but well worth the smiles..

[@kjmix1]

Great job on the video. I knew the theory but needed to see it done. Vinyl Newby says Thank you

[@HeartHustlePrinting]

Need vinyl like I have since opened a store... . WWW.TheVinylStand.com . KEEP PRESSIN!!!

[@darens3907]

They need to be made the press with laser lines to line up everything.

[@HeartHustlePrinting]

Yeah they do..

[@JamallWilliamH]

Great video, I've watched it 3 time. I Had to look for your video again, I made sure I saved it. Thanks.

[@HeartHustlePrinting]

Awesome glad I could help. Look at some of my newer stuff I do full walkthrough. From start to finish... Thanks for watching. KEEP PRESSIN!!!!!

[@rodypollock8935]

excellent, thanks for showing how to get it multi colors I already have a order coming in needing 4 colors.

[@HeartHustlePrinting]

No problem. When your ready for you next order let us know.

[@constancelevering4296]

Nice video...that is WONDERFUL...thank you for sharing ! 🙏❤️

[@HeartHustlePrinting]

Thats for watching!!!!

[@dcmtrader]

Dude, nice detail work!

[@HeartHustlePrinting]

Thanks Deep Pockets

[@oniwindeben4332]

just seeing this video, but I must commend you. A good job there..💯

[@naysworld]

Thanks for these videos, they really motivate me.!!

[@HeartHustlePrinting]

Thanks for wat hing Naysworld.

[@robbie1266]

Ty just learnt something new. 🐐

[@Jamaicanbacon30]

I want to learn how to take those individual pieces out. The process of the Little pieces

[@HeartHustlePrinting]

Heres the perfect video for you. Thanks for watching.. . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@kaywoodparsons1874]

Beautiful Work

[@HeartHustlePrinting]

Thank you

[@janmayeaux6392]

Wow! This is exactly what I needed!!! Thanks!!!

[@HeartHustlePrinting]

No problem. If you need some blk or white vinly we carry it....

[@RichAds]

Wow very nice tutorial sir, keep it up.

[@HeartHustlePrinting]

Thanks for watching RichAds..

[@RichAds]

@@HeartHustlePrinting welcome sir.

[@HeartHustlePrinting]

Im alsways putting out new videos to help thoes who are interested in learning. Click the subscribe and bell so you will be notified when a new video comes out..

[@schumaker221]

That's awesome print, looks amazing.

[@HeartHustlePrinting]

Thanks Evaldas

[@karenrivers-johnson2210]

This was beautiful

[@HeartHustlePrinting]

Thank Karen..

[@JJCGCAZ]

Thank you bro!! Keep it up great videos!!👍🏽💪🏽

[@chad4452]

Dude amazing stuff. Precision to detail!

[@HeartHustlePrinting]

Awesome thanks. Make sure you click the bell so you are notified when I put out more videos....

[@HeartHustlePrinting]

Awesome thanks. Make sure you click the bell so you are notified when I put out more videos....

[@HeartHustlePrinting]

Thanks for watching.

[@lramlu]

Oh my God! This guy is bionic! Did u see how fast he wa weeding? Hahaha!

[@HeartHustlePrinting]

HAHA I was born with super speeds. 😂🤣😂

[@manpare6767]

great work.

[@HeartHustlePrinting]

Thanks Man Pare

[@coryjeffreys5146]

Looks great

[@HeartHustlePrinting]

Thanks Cory

[@juansalazar2192]

yo también hago lo mismo. Cuando ya tienes tienes tiempo y conoces el trabajo es fácil y perfecto. como lo que yo hago. ;)

[@paulhawkins3763]

Great work man, thank you for sharing.

[@Mr_Chuckles]

Beautiful product, but man what a ton of work. Probably easier to print on digital HTV, of course you would have a bigger, solid print then.

[@HeartHustlePrinting]

Thank you. When you first start out its all about the HUSTLE and you dont care how much work it takes. Look at my new videos and see where im at now bc i did stuff like this. V/R

[@Mr_Chuckles]

@@HeartHustlePrinting Very true, gotta put the work in to make this a success and level up. My biggest challenge right now is getting out there and getting customers. So many cheaper, online options for people now.

[@deadmau51973]

thanks for this video man.. it gives me idea on it...

[@HeartHustlePrinting]

No Problem.

[@holladirecttv]

YOU'RE GOOD AT WHAT YOU DO MAN!

[@HeartHustlePrinting]

Thanks HollaDirectTV

[@paullagates-lewis7870]

Thanks for the HTV video.

[@HeartHustlePrinting]

Thanks for watching..

[@creativetips97]

I enjoyed the process

[@HeartHustlePrinting]

Thanks for watching!!

[@arsyilazyrafalfares2909]

Wow Amaizing

[@HeartHustlePrinting]

Thanks for watching Arsyil.

[@arsyilazyrafalfares2909]

@@HeartHustlePrinting 🍗🍗🍗🍗🍗

[@AITab-duang]

GOOD, I have tried the INWISH Vinyl, is very good.

[@HeartHustlePrinting]

Which one

[@abdelalibenmoussa6190]

Bravo

[@HeartHustlePrinting]

👍🏼

[@reneew8082]

Great teacher thank you

[@HeartHustlePrinting]

No problem. Thanks for watching Renee..

[@kHoPhAe]

Beau-ti-ful!

[@HeartHustlePrinting]

Thank you KhOpHaE!!

[@kingjeffishere]

Awesome vid!

[@HeartHustlePrinting]

Thanks for watching.

[@lennyhipp]

seems like a LOT of work for HTV. considering all the labor involved, isn't it easier just to do it as a plastisol transfer?

[@HeartHustlePrinting]

It was a Hustle back then so we did what we had to do.... I then got into Plastisol Transfers and now were screen printing..

[@mattkoehn7810]

Loved this. Good stuff man

[@HeartHustlePrinting]

Thanks Matt!!

[@deblake60]

Very interesting! Would you happen to have a video on how you setup all the designs and the cuttings? I'm a bit confused on the outline piece fitting with the color body?

[@HeartHustlePrinting]

kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@simonpike779]

Man you make it look so easy!😀 it would look like a hot mess if i tried!

[@HeartHustlePrinting]

Lol.. It happens to me sometimes but as long as you have a plan it should come out right.

[@SwinkMediaHouse]

Quality on point!

[@HeartHustlePrinting]

Thank you!!!

[@rachaeldiaz9983]

great video! i'm new to this. learned alot. thanks!!!

[@HeartHustlePrinting]

Thanks for watching... We got more videos.. Make sure you Sub for more info..

[@jayp6945]

Still Binge watching bro! LOL Great video!

[@HeartHustlePrinting]

i appreciate it.. You need to upload more so i can do the same.

[@jayp6945]

@@HeartHustlePrinting working on it lol

[@nataliemarie2528]

Thank you, I’m getting ready to buy a heat press and get down... Lol! Love yr channel thanks again🖤

[@alexchavez8764]

Thanks for the vid! Helped this newbie out

[@HeartHustlePrinting]

Awesome. Watch some of my new stuff go more into detail. Also Subscribe for our 15000 heatpress giveaway..

[@borneofingerstylelegacy3051]

Wtf bro.. So smooth..thanks for the video..

[@HeartHustlePrinting]

Thanks for wat hing Borneo

[@rbkens81]

i'm starting on my little business in baja california it was so helpfull... thanks

[@HeartHustlePrinting]

Congrats and No problem. Look at some of my new videos for more tips.

[@aldogarcia2150]

Thaats Right ! Same here Tijuana, B.C

[@HeartHustlePrinting]

Thanks Aldo...Make sure you click the bell you will be notified when I put out new videos...

[@aldogarcia2150]

@@HeartHustlePrinting yeah thanks just one question which heat press you use ?

[@HeartHustlePrinting]

Tusy 5 in1 heat press (12x15): Nothing fancy. These get the job done.. amzn.to/2ZeLXcu Tusy New 5 in 1 Heat press (15x15): amzn.to/2lm9oCL

[@libertyjoseph8523]

You are such an inspirational person. Could you please recommend a printer to start off the printing business and maybe why you recommend it Lol.

[@leviteapparel]

HAD TO WATCH AND LIKE VIDEO ON POINT

[@HeartHustlePrinting]

Levite email me [e-mail] I need to send you package but need info.

[@Friths1]

Excellent, thank you

[@HeartHustlePrinting]

Thanks for subscribing..

[@dealerrecon]

What kind of heat press is the blue unit in the video? Also, what type of cutter/plotter and software do you use? Your work is exceptional! Thank you for your knowledge and your videos are very nice to watch!

[@HeartHustlePrinting]

The heatpress is a 16x20 that i got off of Ebay. That cutter 8n the video I dont use anymore. I now use a Vinyl Express QE6000. The one in the video is the R series II. You can find at Signwarehouse.com

[@albinosvlogs1427]

wow business god

[@HeartHustlePrinting]

Thanks for comment Albinos...

[@foundrylabz]

Te quedo chingona! Me gusta!

[@x213ERx]

Imagine doing 100 sweaters...I can not. Is there an easier and faster way but with one color?

[@HeartHustlePrinting]

No way. If so I would screen print them now.

[@charliesamples9376]

Yo bro that was a tight video. I learned alot.

[@HeartHustlePrinting]

Thanks Charlie. Make sure you checkout other videos. Alot more info on my ch.

[@beastingmode7506]

Can you tell how you did the layering so outline of each piece made easy?? Which software and cutter and the steps (method) you used.Can you tell me what i need to start doing this and also make my own stickers and stencils for shoes designs :) :)

[@HeartHustlePrinting]

Thanks for watching. I now hoav other videos showing step be step how to layer and not get gaps..

[@HeartHustlePrinting]

Here you go start to finish... kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@thadon3451]

Nice Nice Nice

[@mrgreenmrgreen7364]

Nice work!

[@HeartHustlePrinting]

Thanks!!

[@danbarb9728]

i always wondered if its neccessary to use a pillow because most presses have those silicon pads on teh bottom plate which will compensate the seams anyway i would guess. Ive ordered the pillows but as a beginner i would say the silicon pad "eat" the swams once you press them down.

[@HeartHustlePrinting]

the silicon pad dosent have as much give a the foam pad or pillow thats the reason we us it.

[@matthewfabing9405]

Awesome piece, much appreciated

[@HeartHustlePrinting]

No problem. Thanks for watching.

[@LOV4_Aesthetixx]

got some ideas thank you so much..

[@HeartHustlePrinting]

Thanks for watching. Check other videos fo more Ideas.

[@cherylbrownlifeexposed3926]

HEYYYYYY.... I used to binge watch this video when I first started... still haven't really tackled more then a 2 color process like I should... Have a great night

[@HeartHustlePrinting]

Your so awesome Cheryl!!!! Thanks for all the support...

[@thesocialtrendz6341]

Or is that just how the printer cuts the photo? In layers?

[@HeartHustlePrinting]

When i put the image into the program it breaks up the colors. Then i just put in the color I want cut and it cuts it. Click the link below to see full process.. kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@OscarsPlaces]

You are good man!

[@naefaust581]

Could you show how to cut the vinyl. A printing service in my area told me that I cannot cut a vinyl design by hand. So I have to have a special cutting machine and heat press?

[@HeartHustlePrinting]

Here you go.... . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@MrKmetski]

So you slice cut each vinyl to make that the 4 color process without layering?

[@HeartHustlePrinting]

Yeah. I like to get all the vinyl to stick to the actual garment its self.

[@ArtKingjr]

Three questions. 1. Where did you get that T-square? Can you leave a link if ordered online? 2. How did you weed all those details without pulling up the wrong part? 3. How much would you sale an sweatshirt that too that much time and effort?

[@almightyskooby7567]

Clean 🔥

[@beagledad2478]

Great work man. Made it look easy. I noticed you do about 157 temperature where other places I see 315-320. I'm wondering what's best thanks. I'm gonna be subscriber #1,000 😎✌️

[@HeartHustlePrinting]

Nice I been waiting on it to happen!!!! Thanks for being number 1000 and for support!!!! As for the 157 mine reads in Celsius. Didnt know at the time so i jave to convert to ferignhight... Alao when you purchase vinly it shiuld come with recommended temperature and press time..

[@beagledad2478]

@@HeartHustlePrinting oh I see. Thanks for getting back to me and thanks for the videos. Congratulations on 1k subscribers sir 🎉🎉🎉

[@BrotherBernard7]

subbed, thank you

[@HeartHustlePrinting]

Awesome thanks. Make sure you click the bell so you are notified when I put out more videos....

[@belindagriffin4936]

this is nice you did an awesome job

[@HeartHustlePrinting]

Tks!!

[@riganyanga2526]

Nice work keep it up

[@HeartHustlePrinting]

Thanks for watching!!

[@ajvaldez]

great video bro

[@LoveJonesy101]

nice

[@HeartHustlePrinting]

Thanks for watching.

[@babymarcus123]

Have you ever pressed a yard sale sign? I wanted to make senior graduation signs.

[@HeartHustlePrinting]

Hi Dr. Yard signs are done with Adhesive vinyl or screen printed with a certain type of ink.

[@babymarcus123]

@@HeartHustlePrinting Thanks for responding - do you have a wholesale recommendation for purchasing corrugated paper for the signs? I live in Orlando.

[@HeartHustlePrinting]

No sorry I dont do alot at this time so I haven't really looked..

[@monicaxayabar]

great job ! how did you avoid shrinkage so that everything would line up ?

[@HeartHustlePrinting]

Thanks!! I used thet outline technique. Only thing i had to really worrie about was the badger face, but that came out good

[@Lordblanca]

Great work.

[@HeartHustlePrinting]

Thanks!!!

[@GoProGoalieUzi]

Wow!! Well done!! How is the durability and look after being washed?

[@HeartHustlePrinting]

They still have them today.

[@thesocialtrendz6341]

My question is, how did you print everything individually?

[@fetymann]

The power of vector graphics. It's all in the software. You just print/cut them separately.

[@electricboogeyman5855]

Hello Heart and Hustle, I just purchased my first vinyl cutter recently. The heat press has been ordered, now all I need is reliable Heat transfer vinyl. I was wondering what HTV you use in this video. Great video. Instant subscribe.

[@HeartHustlePrinting]

Boogeyman thanks for wat hing and showing your support by subscribing. I like two different types.. I like the bflex Gimme 5 and thermoflexplus. Here is a link to Gimme 5 vinyl. b-flexamerica.com/?ref=4 For thermoflex plus you can check Signwarehouse.com or Amazon.. Let me know if you ever need anthing.

[@electricboogeyman5855]

@@HeartHustlePrinting thanks for the quick response! I'll definitely let you know if I need anything else. I hope these are affiliate links. I am about to order 10 yards of gimme5.

[@HeartHustlePrinting]

Yes sir!!!! I always try to answer all question super fast.. It is an affiliate. Good this about Bflex is if you don't like it send what you have left and they will refund your money. Save you some time when pressing. Its hard to believe but it presses in 4sec....

[@electricboogeyman5855]

Wow, that is the best thing I've come across today. Glad your channel was in my recommended videos. I'll keep in touch.

[@HeartHustlePrinting]

@@electricboogeyman5855 Anytime!!