My embroidery beginner tips for caps.

[@bridgetgainous5487]

Your video is very thorough. I am using it to help me with the Ricoma training video. Your video is so much better. Thank you for sharing your talent.

[@HeartHustlePrinting]

Thank you for watching. I have a whole section for embroidery using Ricoma machines. if you subscribed make sure you click the bell to be notified when I put out new tips and tricks.

[@GStax]

I appreciate your videos bro. I just brought the TC -1501 and trying to attach hats was kicking my tail until I watch this video. 💪🏾

[@fayedee8080]

How do you like it for hats? I’m between the mt and tc

[@LillianRamirez-c9h]

Have you embroidered on kids extra small caps? Can you do a video on that? Hooping them and getting the design as low to brim as possible. Thanks for all of your help. I have the MT 1501.

[@EleanorKapiolaniKahuli-Apo]

Thank you for sharing.🌸 Very informative!

[@iceyshelle6560]

I can't wait to start my business watching you and other business men and business woman gives me so much confidence to keep going even tho I don't have a machine yet its coming

[@HeartHustlePrinting]

You got it Icey!!

[@ATeePrint]

I was one of those who took advantage of this deal so whenever you get a chance do it.

[@princessss42]

Thanks so much for mentioning that the hat doesn’t have to pushed all the way back on the hoop. I’ve been struggling with my hats for sometime not knowing that.

[@colincourier]

great informative video,thank you so much for sharing.colin uk.

[@hooked_fish]

Good tips thanks, please videos for digitizing tips

[@deborahapegram5852]

Thanks for explaining all the details of hooping the hat

[@YWaitConsulting]

great video

[@yanirapena2039]

The best explanation, thank you so much!

[@danielpapp4080]

Cool. Thanks for the video and info

[@sammysmom1287]

This was great! Best Bai video out there. Where are more? You are a great teacher. Waiting for more videos!!

[@jessiegibson9023]

Good video Joe looks great thanks

[@MikesLife87]

Man oh man. You are the man. You explain it so we’ll brother. Stay blessed and continue succeeding. You definitely earned my like 👍🏼 and Sub. I didn’t want to jinx myself before the video was over to write something. I can’t wait to watch more of your videos. Thanks again for the outstanding step by step details.

[@CindyJonesandPaigeHoffma-hj1qw]

I saw you do some digitizing I am looking for one

[@jeremyfabrega28]

This video was so well put together, the filming, the angles, the explanation itself. A gem. Big up!!😎

[@HeartHustlePrinting]

Thanks for taking the time to watch Jeremy.

[@tankt4214]

Thanks for the info!

[@ZsoCreative1NJ]

Hi Joe thanks for all the great tutorials and tips. Currently tackling mastery of hats. I like the one I. This video- can you share the link to purchase? Please and thank you

[@patmazzole1720]

Great teaching learning so much do you digitize for hats or do you know of a good digitizer for hats

[@mdiane7]

needing a good digitizer! im not seeing the one you mentioned listed!

[@JohnGateley-q3l]

Very great video and explained simply for a new comer. Who was the digitizer you suggested? You still working with that company now being a year after this video? Can you share again? Thanks you sir.

[@HeartHustlePrinting]

Im now doing my own digitizing. If you need something, let me know. Starting at $10.00

[@JohnGateley-q3l]

@@HeartHustlePrinting Good deal. Yes, would like to send you something small and see what you can do with it. How should I reach out?

[@DevinDiaz8]

How are you setting up your tensions for caps? Was doing good but now cant get it dialed back in to a good stitch. Is there a special way to do it knowing you will be working in caps?

[@TheZehcnas1008]

Do you have any videos on embroidering the side of a Richardson 112 with mesh sides?

[@lizmorgan9155]

thank you!! so helpful.

[@thehouseofgarb6031]

Looks great Joe, our machine just arrived 2 days ago, start training next week. Thanks for all the tips on the Hats! Happy thanksgiving my friend.

[@HeartHustlePrinting]

Sweet!! Same to you and your family.

[@ATeePrint]

That's awesome my arrive Tuesday!! Congrats 🎉

[@lucyalgood]

I just love the way you explain everything!! Ty!! Now let me ask u this: in case you want to embroider on the front SIDE(but still the front), how do you trace/place that? Many thanks 😊

[@mpd4173]

I did not see you talk about lining up center up center seam of hat to center line on cap hoop when hooping. Also I have a lot more flagging on my hats which causes me heart ache. I saw a video on Avance’ machines that the driver can be lowered to fix the flagging.I have the Ricoma 1501TC so wondered if you have ever adjusted the driver on your Ricoma? Any advice in this area will be appreciated.

[@HalfAssHomestead]

Mine is being delivered on 12/02 and I have Cholo on the side waiting to aid me if needed.

[@HeartHustlePrinting]

Nice

[@roseelston8866]

Hi Joe, I was trying to find a link to your digitizer, but I don’t see him down there. Can you post that thank you.

[@wimpclothingapparel3219]

Thank you.

[@dablocishot77]

@9:45 LMFAO I spent hrs and hrs trying to figure out why when selecting another needle it would default back to needle number 1. It drove me insane. Somehow I figured out it was only Tracing off needle number one but actually stitching on the needle I selected. It makes sense when you think about it. Needle number 1 is at the end of the head therefore you have more clarity looking at it while it traces the design from needle one vs say, needle 5 being that the rest of the head would obstruct your view if that make sense.

[@kimberlymondragon9993]

Hello, maybe I am missing it somewhere, but can I get your digitizer Info. I need someone who knows cap digitizing especial. ty

[@bro_got_it_5Lb]

@bro_got_it Ig hit him for digitizing

[@25wuero]

Haz un video de principiante en español, tengo la Ricoma 1501 y no se como usarla, también recomienda un programa mejor que Chroma que este económico. Muchas gracias

[@JCARLOS16]

I have the em 1010 but I’m having trouble embroidering the 815 caps.

[@robertmartinez696]

Wuts up bro..all the way from oak cliff texas..been watching u for 2 yrs now..congrats on all ur success..just got a em1010..any advice on tension..no matter where I put tension on some of my needles I get thread breaks..some needles good..#1 is from deep down in hell..breaks needles and thread

[@HeartHustlePrinting]

On one did you bend the presser foot?

[@WhuDhat]

aww man, just started as an embroiderer for an established company, they have me doing solely hats. really wosh I would have found this video while I was researchingn for my interview. it would have made these last few weeks a breeze.

[@quebarbaridad1]

Hey Joe, very helpful video, but I couldn't see any links to buying the machine. Please can you send it to me? Thank you!

[@HeartHustlePrinting]

Here you go. Thanks for watching. info.ricoma.com/referral-emb?referralCode=heart-and-hustle-printing

[@syltoy2745]

You mentioned your digitizer, but I didn't find his name /number below.

[@lizmorgan9155]

what do you have the cap frame size (x size and y size) for the embroidery frame setting?

[@luisbarrieta]

I couldn’t find who you referenced to that does your digitizing. Can you give the link?

[@SewWhatStitching]

I'm looking for the guy you use for digitizing?

[@HeartHustlePrinting]

We do it in house. Is orders to [e-mail]. Subject Digitizing

[@JcsuccessNation]

What’s the website of your guy digitizing

[@princessss42]

Is there ever a time that you do not use backing on a structured hat bc it’s stiff?

[@HeartHustlePrinting]

I don’t use backing on structured hats at all

[@princessss42]

Thank you so much. This might be my problem. I will try not using the backing then.

[@JCARLOS16]

I keep getting needle breaks and registration issues

[@anthonyblake8251]

What needles do you recommend for structed hats? I ise the regular 80/12 and seem to have issues with the center seam

[@dominiquevaldez5573]

How do you stop the bounce when embroidering structure hats?

[@WhuDhat]

hoop them tighter

[@jairomartinez6768]

Hi What needle size do you use

[@cherylcampbell994]

What size needle? I keep getting thread breaks n the need doesn't sew good on the seam?

[@HeartHustlePrinting]

What machine are you using?

[@jjhgcustomdesigns9455]

Hi, do you have any referrals for digitizers?

[@saulcarbajal4569]

WHATS YOUR DIGITIZER'S LINK

[@caryh4602]

I have an issue, where my hat has to much play when stitching. The material bounces up and down while it's stitching. I can't figure out for the life of me why it does that. Due to it moving so much the stitching is never as good as it should be.

[@HeartHustlePrinting]

You can lower the cap driver a little so it wont bounce as much.

[@tarabrown2854]

Why does my structured hat sound hollow when close to the middle?

[@HeartHustlePrinting]

You have to much distance between hat and presser plate.

[@tarabrown2854]

@@HeartHustlePrinting how would I fix that I have it hooped as tight as possible 😭

[@psa_inkzandthreadz]

Hi there. I really enjoy watching your videos. Is there a trick to getting the design lower on the hat or making the stich field larger? Thanks

[@HeartHustlePrinting]

YES, you have to go into your settings and change your parameters. I have a video coming out soon.

[@psa_inkzandthreadz]

@@HeartHustlePrinting thank you I can’t wait does the video. I have the TC 1501

[@hooked_fish]

Hey bro what needle 🪡 use for hat 🧢 80/12 or 75/11 is for flat and 3d puff thanks

[@HeartHustlePrinting]

All depends on the hat. in this video I used a 65/9

[@hooked_fish]

@@HeartHustlePrinting thanks so much appreciate ! What hat is this I liked the finish in this hat 🧢

[@HeartHustlePrinting]

I said what it was in the video. I dont remember off the top of my head.

[@mikebates944]

Hey Joe: I looked through the description several times to find the link to your digitizer. Is it not there or am I just missing it?

[@HeartHustlePrinting]

Sorry here he is.. instagram.com/im_arhumtariq?

[@mikebates944]

@@HeartHustlePrinting Hey Joe I don’t use Instagram. Is there another way to contact him? A webpage or email perhaps.

[@HeartHustlePrinting]

Sorry so late. [e-mail]

[@michaeloleary9130]

my machine is set to like 450 SPM i saw yours is at like 700+? , the design is not in high detail would you reccomend speeding it up? im also running into my design ending up crooked every time i think it is the way i am hooping maybe ? im using the yupoong snapbacks , any help or suggestions is greatly appreciated

[@HeartHustlePrinting]

Yes speed it uo if its not alot of detail. If its crooked it has to be the hooping

[@michaeloleary9130]

@@HeartHustlePrinting right on thank you

[@Troid-X]

how to make one like the one you're wearing rn

[@rustydrake1828]

how much was the machine

[@mariapetrone2605]

Who does your digitizing?

[@HeartHustlePrinting]

We have started doing it ourselves. Let us know if you need it.

[@mariapetrone2605]

@@HeartHustlePrinting do you quote first? What’s your website?

[@HeartHustlePrinting]

Yes i do. WWW.HEARTANDHUSTLEPRINTING.COM

[@kencanada4492]

I know this video's a year old but you said you would list your digitizer name could I get the name of your digitizer

[@Learninghowtorebuild]

Need help , my image isn't centered

[@HeartHustlePrinting]

Look at the digitizing and look for the X. The X makrs the center.

[@HeartHustlePrinting]

If you still need help send me the DsT file and ill look at it for you. [e-mail]

[@bigboiprints5726]

Hard and hustle printing sup fam! How are you bro!

[@HeartHustlePrinting]

What up Big Boi. All good here. Happy Thanksgiving

[@ATeePrint]

Brother thank you for this video I feel like this video was made for me lol 😂 Joey let me tell you something you did a way better video than Ricoma I learned from your video... Thank you, A Tee Print

[@Mark-ob8nh]

No video

[@joeperez2507]

Working on our end.