TIA Portal: How to import GSD (General Station Desciption) Files

[@nandarora1303]

Great video! It would be great if you can also make a video on sending and receiving data from other controllers (which are not from Siemens). Like sharing data with a robot. Thanks!

[@nasonmutale2937]

Great video ,thanks . Your videos are really helpful for a beginner like me.

[@zhengkunyan8001]

hello guys， some more hints from YAN, if you wanna get code from plc and upload to your PC. You must pre-installed the GSD file which used by the project in PLC (if no GSD, no need). Second, you need same version of TIA portal which is utilized to program the PLC. Otherwise you can’t get the code.😘

[@EHSANCHAHARMAHALI]

You are the king🎉🎉🎉

[@Resonant87]

Great content! Pumping out new organization of videos helps. Although I think there some basics missing that might make good tutorials. How to use outputs for PWM, PTO, frequency, etc...

[@hegamurl7434]

Thanks for the feedback! I have a long list with video ideas and will put yours on it!

[@nandarora1303]

Looking forward to a video on PWM or frequency!

[@saifrehman7413]

So so helpful. Keep sharing more videos. Many thanks

[@muhammadkhalid8374]

Great things thanks a lot of

[@fverboven]

Great , very usefull and very clear explained ,,, top :)

[@electronicinfrared8329]

Hi I want to upload program from PLC to PC but upload button off saying about gsd files ..what to do

[@oguzsahinn]

We have wago io modules and used gsd files. Very useful system.

[@mahandhiraselvant9022]

Hey phili can you please show how to change the as per our requirement I/O tag number to change in gsd file inside

[@sodhakishansinh9478]

Sir Very good explanation 👍

[@sarahlabidi6558]

Great, thank you for sharing

[@anoop22march]

Sir please make video on DP/DA couplers, How to check profibus cable.

[@khadarbabamohammad8281]

Great, thank you for sharing the information

[@christian_t7954]

Thanks dude you are incredible !

[@danielg.j.2099]

Hi, Sorry if this is not the video where this question goes. I have a DL100 laser position device and for now I could conect and get distance and speed but I need to configure from PLC to de device and I don't know how to do it. Do you have any example of this? I do really appreciate your help.

[@amaohabeeb9122]

Hi Do i need a gsd file to create a profibus communication between siemens plc cpu and siemens Interface module using tia portal.

[@JM-wc3gw]

Thank you for this Video. How about a generator set which has a Mitsubishi control panel can I apply this thing?

[@framos9991]

Helpful.Thank you!

[@thierrymeuris8042]

Anothe great video! Do you also have a video on how to e.g. write or read a bit from a decentral I/O module trough Profinet? I'd like to see how the adressing stuff works!! Thanks! Keep up the great work!

[@theboringchannel6721]

Great video. Thank you sir

[@trolingmaster23]

Hi! Can you help me? I'm using a weighing module with profinet GSD, the manufacturer tells that the weighing signal is 16 bit. I originally used UDInt so that's 32 bits if I remember correctly. It worked king of ok because I didn't noticed the length, because I was following another manufacturer tutorial and for them it was 32 bit. On Monday I'm going back to check if the 16 bit approach worked. The question is, how are inputs managed? I can work with a normal " %IW100" for example? Or should them be input as peripheral ? " :P%IW100 " I need it to work. The first time I used the module I only had one scale, but this time is 2 scales which the module is capable of, the thing is that the bits may overlap if I don't use them correctly, it's 16 bits for one signal and then the next immediate 16 bits for another

[@matthias8470]

Genius. Helpful genius.

[@hegamurl7434]

First Comment!

[@lavousee]

Hello, I cannot find the file sinamics 20171106.xml on the siemens GSD website. what is he supposed to do? it won't allow me to download the program from PLC ...

[@bilalfarih3449]

Hello thank you for your videos, i have one question, i installed the GSDML of one device in TIA PORTAL V16 and the installation normally was successful, but when i look in hardware catalog, this device doesn't appears. what can is the problem?

[@rafm101993]

Hi! Can you make a video on Danfoss FC302 VFD profibus GSD installation and how to program it (Start/Stop/Rever/Speed Reference) in TIA if possible?

[@divyeshmali4958]

informativ. 👍

[@zhengkunyan8001]

May I ask a question, I build the modbus communication between Rockwell plc and S7-410smart by using CP modules (my real experience), but I don’t need GSD file. So if I have GSD file installed, no need configure the communication (including use PSend PReceive block?)

[@luzvic2717]

I HAVE A DOUBT. IF I WANT TO MAKE A BACKUP? WHAT SHOULD I DO? I HAVE SEVEN FESTO MODULES AND ONE WEIDMULLER MODULE. REGARDS AND THANKS.

[@glebonly4660]

Hello. Please make a video about communication of siemens plc and product of another manufactor. maybe "RDREC" "WRREC" functions.

[@anoop22march]

Sir please video software fault occur in Simatics manager and TIA portal like Communication, hardware ,how to diagnosis them

[@mortezarahimi6784]

hi Phillipe. please make some tutorials on LAD programming with both digital i/o and analog i/o. at least in a series videos from beginning to the end. from hardware selection and tag creation to the HMI control. having for example all the topics you have mentioned (OBs, Timers, counters, flipfliops and PID controller.) that video ALONE would be the best Source for TIA Portal in the whole Internet, Please!!! ☺☺😊🙏🙏

[@zhengkunyan8001]

I mean if I have GSD files, the two devices can set up their communication directly? (Can read data directly by entering the address?)No need any other configurations?

[@surendra19801980]

thanks for video

[@JinsonKurianVJames]

Nice. Very useful. I have tried some stuffs like this with P&F absolute encoder to measure leg length of jack up rigs. One thing I suggest to add in part 2 video that is "Telegram" . How could we use standard or siemens telegram to get input and transfer output to the other device like encoder or Vfd? Also with example, how does these telegram Dint data value work on external devices like encoder or Vfd?

[@TheMusabsaleh85]

Is there a FC or FB that comes with gsd file which I can use it to make the control of this device easier?

[@sovonbhattacharya4410]

How to Import LGF File In TIA PORTAL

[@aouartamohammed2534]

Great video

[@hibra5570]

How can I get your course?

[@jees__antony]

thanks

[@مصطفیغلامی-م7ن]

Hello I am Mostafa Gholami engineer electrical I need a download qsd file INOVANCE servo drive Can are you help me

[@dennisrubio2375]

great

[@christiandimelow9274]

Nice video

[@hegamurl7434]

Thanks! Great... now my "First Comment!" - comment is actually not true, because you were faster by 7 seconds!😅

[@christiandimelow9274]

Haha, sorry about that 🤣

[@dukenuke2690]

lol, you guys have problems ..

[@christiandimelow9274]

Do you plan on making any videos involving I/O link?

[@fonso_8416]

Hi all! Great video Hegamurl! Anyone knows the difference between HSP y GSD? Thanks in advance :)

[@ginnorenzo]

Hello, It's possible export GSD that it's in my project, How do I do?

[@hegamurl7434]

If you save your project and open it on any other PC that does not have it, it should be automatically installed by tia portal

[@ashoksham8640]

Make a sample program on field devices using GSD files

[@beautyofislam323]

nice sir

[@sabermrz8759]

👍

[@saeed2tube]

Festo made interesting robot.😉

[@hegamurl7434]

They make many interesting robots, I like the flying ones, they look so elegant and simple

[@_Iokanaan_Marusidze_]

thanks