Hellcat Full Takedown!! • Deep Clean & Inspection! | TheSmoaks Vlog_2344

[@NosotrosLosmeros]

I'm not quite sure why, but you are my Bob Ross of gun disassembly...

[@arnavwaghmare3324]

“It’s been done 100 times maybe, but I haven’t done it for you” - Instant like

[@TJRohyans]

I just love taking mechanical things apart to understand how they function! Wish I'd had a video like this a couple decades ago when I tried to clean my S&W .45. I made an oily mess of it! I haven't owned a gun since. Peace and love.

[@littletimmy364]

That trigger bar might be the most complicated thing to machine in this gun. It is pressed down from a sheet of metal, shaped and then you need to machine it into spec. You put it manually into a device and it is truly a work of art to machine it into tolerance.

[@abdulrahimafandi8043]

Thank you 👌👌👍

[@GranTigerGaming]

6:20 hah! I'm here because that exact pin looks rusted on hellcat pro, but I see orange around the pin too so still a bit worried myself. Gonna do a deeper clean, so this is helpful.

[@BadBoy-tn2yx]

So this is far more complicated than the Glock. Polishing bits and taking small things apart make me uneasy. This video is great.

[@dandaniels4558]

Very interesting. I would have parts left over LOL Your abilities to take anything apart and reassemble it are amazing shawn Doesn't seem to matter what it is you just have that mechanical mind like Andrew Camarata on his channel. Great video thanks

[@glenisley8240]

Guess I'm first. First morning back in illinois after the winter in Florida and my body is still on eastern time. Interesting vlog. I've never taken a firearm that far apart but I'm inspired now. May you and yours have blessed and happy Easter.

[@la_old_salt2241]

Nice job Shawn, now I need to clean and lube my Security-9 and PCC. Have yet to make it to the range for function testing. Then comes formal sight in of course. You and Momma have a great Easter Sunday. He is Risen! God bless, Rob

[@gregbeck906]

I thank you for all your effort my friend. Much appreciated!

[@TheSmoaksVlogs]

Much appreciated! 👍

[@hatfieldkaz]

Thank you for the breakdown and rebuild. You rock! 👏🙌🔥❤️

[@-.Steven]

WHOA! Haven't watched the video, but the thumbnail is Intense! Thanks!

[@TheSmoaksVlogs]

Thanks Steven!! 👍

[@keithjones894]

Thanks for the breakdown! Helped out alot

[@chrismills4213]

Very educational….one of the best take down and assembly videos👌👍Good stuff Smoak…

[@3lljay881]

Great video brud a video of a full breakdown shouldn’t be short with a lot of cuts you did a great job.

[@gerrysturis]

Excellent job Shawn. That was very informative. Wishing you and Kelly a happy Easter!

[@unclejean1545]

what white litium do you reccomend? Thank you for the great video!

[@TheSmoaksVlogs]

I use Lucas brand. I believe that's what Springfield uses and recommends, if I recall... Thanks!! 👍

[@unclejean1545]

Just got back from home depot and picked up some Lucas white lithium. Thank you for the response and the help! Got your self a new subscriber for sure 👍@@TheSmoaksVlogs

[@yamaha4015]

Talk about cleaning and diving into a pistol. I have a sig and ruger. 9 & 22 respectively. I do clean after using but never to this extent . I wouldn’t dare to. I know when to stop. I use a spray, oil cleaner, soak all and lightly blow away, wipe down and lightly oil. You do it the right way. Perfect. The parts I do disassemble I clean meticulously. Nice video. Thank you about the jacket info. No going after rabbits today, it’s Easter. Have a happy

[@Floatwarehouse]

I get that flipping up the take down lever pushes out the magazine blocking lever. But I’m confused what pulls it back in? I’ve seen some videos where the takedown lever is flipped down, but mag blocking lever stays out which seems like a big issue to me. Thanks!

[@Kyle-zf6ei]

where does part 18 and 17 a really small pin and spring in the manual go? pg40-41? popped out at me while cleaning have no clue where it goes

[@ag2158]

How do you remove the tab safety that sits in the center of the trigger?

[@waznyf]

What exactly did you do to clean the individual parts? Forgive me if I missed that detail. What products did you use? I couldn’t tell what the blue product was. Is standard gun oil sufficient for the interior parts or is white lithium grease necessary? Thank you so much for the in depth video! I was looking all over for this type of instruction. Most videos just show a simple field strip.

[@Jrouse37]

How do you remove that one part that you didn't disassemble on the sear housing?

[@jeffdoodlebob4424]

Just spent an hour looking for the retaining spring on the floor, bad day

[@TheSmoaksVlogs]

Oh no...! Thanks Jeff!!

[@michaelperaza1079]

Nice break down video 👍

[@TheSmoaksVlogs]

Thanks for watching!!

[@AviMus82]

Maybe I missed it, but what size punches did you use?

[@tomtribble5807]

Great video!

[@TheSmoaksVlogs]

Thanks Tom!! 👍

[@Turtle36004]

Hello, was finding the firing pin oily bad? Just wondering, ive never deep cleaned my hellcat pro, and i wanted to know if id need to make sure that part of the gun is dry

[@dc4lbbyokay198]

Great video

[@TheSmoaksVlogs]

Thanks!

[@johndilliner7232]

no disconnect bar takedown. that is why I clicked on this

[@ErickRonquillo-f7w]

By any chance do you have a hellcat pro with a manual safety?

[@thomasosteen6027]

Awesome video and would like to see y’all shooting. Take care

[@sultanaljuhani1571]

many thanks for the lesson, very informative and u have a very nice way for explaining. I have a question, do u know if it the same for the Hellcat Pro? thanks dude

[@TheSmoaksVlogs]

Yes, the Pro is exactly the same internally... 👌 Thanks Sultan!! 👍

[@sultanaljuhani1571]

@@TheSmoaksVlogs awesome

[@glock19gen4]

That pin had me going to…? Not sure what is going on with the color. Maybe it’s some sort of coating to protect from rust?

[@burleylit6946]

Awesome!

[@tango165]

Good stuff, that is well beyond a basic field strip!!!

[@eyesonthekingdom]

dang.. you have gone through the furthest than anyone else ive seen so far but.,.,. you stopped at the last pin that I was looking for to see how to take out. the disengaging pin right there at 9:33.. someone please help lead me to the instructions to take that out

[@frankdamelio1664]

Great video !!!! Thank You!

[@714SNF]

how to remove disconnector pin?

[@my.motorrad]

You should do a video with The Yankee Marshal. Isn't he out by you? I think he bought a motorcycle recently too.

[@valken7777777]

You missed a part-the extractor spring pin is not shown because you did not take it apart.

[@onlinestuff4840]

My Disconnector pin is in the way of the sear housing pin???? Only way the sear housing pin goes in if I take out the disconnector pin, which doesn’t make any sense

[@Shadowrun2589]

how many rounds do yall recommend before cleaning?

[@jamesgriffith7899]

I’m at like 3k+ rounds two years of being on my side hundreds of fishing trips and I’m barley here (simple barrel and slide cleaning only)😂 so I’m guessing whenever your ready to take it apart

[@jrba5194]

😮😮😮😮

[@darrenlingerfelt5879]

👍👍

[@russcoaus2043]

😎🔥♥️✌️

[@charlieholt2050]

Why the hell is the retaining spring so small I dropped it and that mf is gone

[@franciscorobson7472]

Liked it show top 🔫😍😍😍🤗👍🇧🇷

[@Walts-Travel]

I'm #300 lol.

[@Bnscholet911]

Great video