Hellcat plug and play Interchiller kit

Extremely easy to install, full bolt on kit, drastically reduce your intake temps, gain HP/TQ
Our interchiller supercools your intercooler anti-freeze way below ambient, more than any icebox or heat exchanger. The freezing cold anti-freeze equals much lower intake temps and no heat soak! You can make pull after pull without losing power to heat soak. Your car will make not only more power with our chiller it will not lose power when it gets hot. Perfect for daily driving, drag racing and mile racing
Check it out on our website
Any questions please feel free to send us a message.
#interchiller #hellcat #mopar #moparornocar #moparnation #dodge #dodgecharger #dodgechallenger #hellcatredeye #ramtrx #trackhawk #dodgedemon #dodgeofficial #moparperformance
Challenger kit: fiinterchillers.com/product/i...
Charger kit: fiinterchillers.com/product/i...
Demon Kit: fiinterchillers.com/product/i...
Red eye kit: fiinterchillers.com/product/i...

[@markuaw1]

Been running my stage 2 forced induction interchiller on my supercharged 21 GT Mustang for two years now works great these guys know their shit and make a great product you get what you pay for

[@ForcedInductionInterchillers]

thank you, glad to hear its kicking ass

[@patrickjoyce4178]

This is brilliant. I’m fitting my HELLCUDA with it for sure

[@ForcedInductionInterchillers]

Glad you like it

[@conspiracybrothergreene2969]

Definitely need to get with overkill performance an get 1 installed

[@ForcedInductionInterchillers]

100%

[@dsmubz]

When are the C7 z06 plug and play kits coming out? I need them for all my LT4 customers.

[@ForcedInductionInterchillers]

They are available right now

[@lylegoodluck]

Will i have problems getting condensation on my maf sensor? Im running centrifugal supercharger.

[@ForcedInductionInterchillers]

if the MAF is after theintercooler condensation maybe possible. We do have ways to avoid condensation, which requires a detailed reply to you, if you need this answer please email the office via the contact form on our website. fiinterchillers.com/contact/

[@ChiMotive113k]

Did this hellcat have any bigger sc tank? Because stock fluid capacity is only 1.2 gallons is that fine?

[@ForcedInductionInterchillers]

all cars event without a chiller require additional fluid volume. The fluid volume is what keeps you cold under wide open throttle.

[@x_sequester1071]

hi, anything for a 2014 ML63? Thanks

[@ForcedInductionInterchillers]

yes we can do any car, please email the office fiinterchillers.com/contact/

[@julianjohnson2813]

Does water drip while at the track with the system on?

[@ForcedInductionInterchillers]

No our chiller is foam insulated, and as long as you also foam sleeve your intercooler hoses you will not drip on the track. We also install a solenoid on all kits which physically blocks the flow of refrigerant to the cabin and is controlled via an ON/OFF switch inside the car. This solenoid/switch allows you to run in 1 of 2 modes: 1. cabin and chiller 2. chiller only When racing, winter time or wanting to get as cold as possible you run in chiller only mode. When in chiller only mode no condensation will form and drip from the cabin evaporator. As such you will meet tech inspection for IHRA, NHRA, ANDRA, and CAM's racing.

[@bigdh6067]

@@ForcedInductionInterchillers Is there a way to turn off the chiller and just run cabin only ? also what tank would you recommend ?

[@ForcedInductionInterchillers]

@@bigdh6067 There is no need to turn off the chiller, you have better fuel economy as less fuel is being lost to evaporation on the back of the intake valve and intake port. Running this chiller you will get better gas milage. For the hellcat look into Rains Precision Motorsports or Black Market Racing.

[@bigdh6067]

@@ForcedInductionInterchillers okay check out those 2 companies for the tanks?

[@ForcedInductionInterchillers]

@@bigdh6067 yes check them out

[@redsavage]

does this void warranty?

[@ForcedInductionInterchillers]

You will void the warranty of the AC system, the new car warranty will not be voided as you are not doing anything to the car that the car cannot already do, as example if you were driving in Alaska. As it uses all CNC fittings to plug into the AC system it is also easily removed.