HELLIBOARD- HOW TO USE AND PROGRAMME.

I have decided to upload a better video than my previous one on how to use and program a helliboard fitted to a Daystate Redwolf, this will apply to pulsar and airwolf mct owners also.
contact jack at [e-mail].

[@ravenshield7823]

I just got mine a week ago for my Redwolf HP .22 cal. Absolutely love it! God, I can't even begin to elaborate on how much this board opens the doors for experimentation. I paid a lot of money for this gun and it had an extremely limited diet. Get a 580 bottle and the Heli board and you got yourself a set up that will do anything. You cant go wrong and I wish I got it sooner. Better, more efficient and more power capable components, and super tight tunes that cut the extreme spread down to nothing, just brilliant.

[@PaulHamM3]

It really is a great bit of equipment, you can really flatten the 'curve' and generate your own custom tune.

[@user-cl4iq5sk6n]

Thanks for the explanation. Want to get a board and this is very helpful

[@PaulHamM3]

Thank you, glad to see not everyone is a moron and you understand my video! Thanks for watching mate.

[@simonthompson6343]

Many thanks for the video, really helpful. I definitely need to get one of these for my RedWolf, I've been wanting to test different pellet weights without going over 12ft/lbs, this looks to be perfect 🙂

[@PaulHamM3]

i have not had any experience with a sub 12 Helliboard but im going to assume that principles of programming one would be the same, thanks for watching mate.

[@MysticalDragon73]

Did you get one? If so how did you like it?

[@martinmartin8911]

Good job

[@kevintravis2154]

Thank you! Good info.

[@RobinWardley]

Nicely done Paul Thank you for your effort to share this 🙂

[@PaulHamM3]

Thanks Robin, glad you appreciate it .

[@Professor-Jack]

Good evening Mate Question where did you get the board from what do you get just the board ? Shot a air wolf to day 177 Stage 12 was over 20FLbs

[@PaulHamM3]

Just the board, its a straight swap for the existing one.Email [e-mail] i paid about €220 euros mate.

[@garybillington2239]

@@PaulHamM3 After watching your video of this I got in touch and received my board last week for my airwolf. Lots of support of him too. Cheers Paul.

[@juniantobakasniperbomber6576]

Mantap 👍👍👍

[@ravenshield7823]

Ok, in this demonstration you had a raw pressure of 826, when you changed the value to the closest number below it, (785) you can see a "15" on the screen and when you changed the value to the number just above it, (830) you could see the number "16" on the screen. There are 20 pressure reference points in ten bar increments. So those were two different pressure reference groups. I think it says in the manual that you want to adjust your your dwell number, when you can closet match the raw value, top left, and reference value, top right. so you would either have to shoot a little air out to get you R value nearest 785 or add a little air in, or back up to 830 to get the most linear spread for your desired dwell timings in that pressure reference group. Does this sound right?

[@PaulHamM3]

Not programmed the helliboard in quite a while but yes that sounds about right. Another thing to consider is you dont want to get obsessed with getting a super consistant shot 'curve' ( like i did) as i realised that just because its a nice flat curve doesnt mean the down range accuracy will be good. I found that just tweeking the voltage up or down a little helped tighten groups.

[@PaulHamM3]

I set about doing two different curves, one for 25gpellets and another in 34g pellets ( .25cal) and i found that the nice flat shooting 34g setting that i did actually shot the 25g pellets better!

[@ravenshield7823]

lol, it's funny because what makes total logical sense, never end up being the way you'd think, this is a tweakers paradise. Thank for the demo!

[@PaulHamM3]

@@ravenshield7823 thats half the fun mate ! You can spend alot of time ( and money !) Getting a good tune to work, and once you go down the rabbit hole of helliboard tuning its hard to stop lol

[@ravenshield7823]

@@PaulHamM3 Exactly, always feel there is room for improvement. Very unrest hobby.

[@POINTSOFAIMcheekyscouser]

So confusing...you are jumping about the information..shot string ?..how many ? Is higher number r or higher number voltage for more power...?

[@PaulHamM3]

Your confusing me mate! Are you asking me what a shot string is??

[@POINTSOFAIMcheekyscouser]

@@PaulHamM3 how many shots do you need to shoot and what power setting..

[@PaulHamM3]

@@POINTSOFAIMcheekyscouser are we talking sub 12 or FAC high power?

[@POINTSOFAIMcheekyscouser]

@@PaulHamM3 i have a heli board in 1 of my daystates..depending on what i fill the gun to , the values change for each power setting 1 - 12 .i need to know what to change p4 on 220 bar fill reads as s443 1723 and 240 bar s525 1800..do i change both or 1 setting s number and the 1723 ?..and or the c69.0v.. .177..no one says to change 1 thing or another

[@PaulHamM3]

Just try changing the capacitor voltage on your power 4 ( c.69v) see where that gets you. Dont worry about changing the pulse widths ( 1723,1800 etc). Are you sub 12 or FAC? If your sub 12 then really to be honest your not going to get the full benefit of the helliboard.