Herman Miller Aeron Remastered 2020 Review: IS IT WORTH IT?

[@limer4330]

You totally understand the purpose of this chair. This is a posture correcting chair. It's also warrantied for 12 years of 24/7 use. That warranty basically includes everything and I've never been able to find a complaint about the customer service. This chair is an investment in your health. Even here in the U.S., I spent a little over $1300 USD on a 15% off sale. When I compare it to the cheap chairs I've had for two years or less costing $150 USD, it's a no brainer. I'm 5' 10" and 185 lbs and have a size B for anyone interested. Before I started working from home, I sat on a Steel Case Leap that was not as comfortable for me. I need more lumbar support. That's just me.

[@Kphyl]

just picked one up today for $300 after looking for forever. So happy to start using it :D

[@honestreviews5885]

Thanks so much for watching and the comments. Its great to hear about your experiences too. Hope you are still loving your Aeron!

[@limer4330]

@@honestreviews5885 thank you. I absolutely love it. It might not be for everyone but it's perfect for me. It's the first chair that I've ever sat in that I don't feel like I sat in a chair all day when I get up from it. I must have an Aeron chair body.

[@shijima_ending]

At 5'10" and 185 lbs, size B is comfortable for you? I'm at 5'11" at 185 lbs with longer legs, and I could literally fit my whole hand in between the edge of the seat pan and the back of my knee. And then the sides are pretty damn close to hugging my legs. The seat pan is way too small

[@konanamegakure4342]

Absolutely. Just bought one finally.

[@honestreviews5885]

Amazing, hope you are loving it!

[@yemail5555]

Have the same one for more than 3 years. Overall it is a good chair. 3 things I wish they can change 1. No seat depth and angle adjustment which my old ergohuman and zody chair has. 2. Size run a little bit small 3 postures fit cannot be adjusted vertically, and the adjustment of postures sl does not do much difference..

[@honestreviews5885]

Hey there, thanks for watching! Totally understand your points. I've just posted a review of the Embody Gaming chair, which I think addresses most of the points you wish they would change about the Aeron, worth a watch > kzbin.info/www/bejne/hHqVeolpqLeip7s

[@electricant55]

Seat depth would be nice, size C seat is a bit too long for my legs, but it wouldn't be nearly as noticeable if the edges weren't made of really hard (almost sharp around the seat) plastic

[@deeeeeeps]

Was thinking about replacing my chair until I realized all the hydraulics and tilt part are common parts and I could order them on Amazon. Fixed my chair for $50 and its better than new.

[@renansassi]

This is the best review of the KZbin! Even better than the Original Hermann Miller!

[@honestreviews5885]

Thank you so much, I'm glad you enjoyed it!

[@christhevoicewriter]

I just bought a chair in the States and was looking for more information on the adjustments. Thank you!

[@glenn1231]

Thanks for the very in dept video review! I ordered mine last week based on your impressions and overall i'm very pleased with it. I think my back is still adjusting because i also feel some light aching in my lower back, my question to this is: is it bad to have the backward tilting enabled? Because when i'm working i automatically go into a more reclined position, is it bad to sit in a more reclined position all day compared to the L-shaped position where the tilting is locked? Thank you!!

[@honestreviews5885]

I'm really glad to hear that you are enjoying the chair! I know its been a while since you left the comment, so I hope its still working great for you!

[@SeanLoke]

Great review, I watched this just before I purchased mine direct from HM (Aeron Gaming version) and suffered from the same issues - mainly lower back pain as I was using a SecretLabs Omega for a few years. Received it yesterday and after just 1 day of sitting in it, I feel the lower back being relieved from the tension and weight I had before.

[@honestreviews5885]

Thanks! Really glad you got the Aeron! Hope it’s still super comfortable - there really needs to be an Aeron emoji I think

[@jfree2739]

Hey i just ordered an aeron as well, coming from secretlab omega also, had enough of that gaming chair with no back support at all, hopefully aeron can serve me well

[@honestreviews5885]

@@jfree2739 Fingers crossed! Hope it goes well :)

[@jfree2739]

@@supernova82 after 2months +, no more lower back pain like secret lab anymore. i felt my seating posture have improved, now is hot period so the mesh helps really helps as it's not as hot as before to sit on a chair. it wont give u a feeling of, Wow this chair is awesome.. but more of a chair that over time you would appreciate as it does not give u any bit of issue. only comparable when i think back about SL chair vs this.

[@jfree2739]

@@supernova82 its worth it, its expensive for sure but after 10 years or so it still has it's resale value if u look at 2nd hand market. as for me, i prefer to spend money on things that i feel it's good for me like good mattress, good pillow, good support shoes and good chair. so it's how u look at it :D

[@johndarland3633]

I would buy it if it was still the classic, the thing with the remastered is.. I imagine it will wear very easy considering it does feel solid. I have an Ikea Markus which I don't like so much now because the foam has pretty much gone and my tailbone/ass gets sore from being sat for just 5 minutes in the same position. I'm 5'10 75kg. The classic I tried out in John lewis was a plasticy mess, everything felt like it was going to break from the posture fit adjustment which snapped from over-tensioning ever so easily, to the twist handles which control the tilt. I also will mention that the arm rests are alright but they're nothing compared to the classic's arm rests which are substantially better, the mesh is also worse off feeling thinner and it doesn't have tilt lock like you can't recline and lock it in the reclined position of choice unlike the classic. Also a lot of the metal such as for the housing of the box underneath the chair has been replaced with a plastic cheaper alternative. Overall now being sold a as a worse version of what it once was under the pretence of "sustainable". I wish I could justify spending the money but not for this.

[@deathmetalcakefarts2751]

Tell me you’ve never sat in a remastered without telling me you’ve never sat in a remastered LOL keep your Markus wagie

[@GamerofGamesGG]

Thanks for this in-depth review, brilliant explanation to all its features, more confident in buying one thanks to you.

[@honestreviews5885]

Thanks so much, and really glad to hear the review has helped you! :)

[@GamerofGamesGG]

@@honestreviews5885 it has. Bought it literally a few days after watching this. Since owning, I’ve replaced it once for a creaking fault after 30 days. The warranty is exceptional. 48 hour exchange. - Thanks again. Saved my back and hips.

[@yaboirairai]

Newly subscribed. Good review. I picked one of these up from John Lewis in the Black Friday sale. I couldn’t pull the trigger on any used one I found on eBay as I couldn’t verify the age or quality in person due to the pandemic.

[@honestreviews5885]

Thanks! Sounds really sensible, I’ve never really got buying a second hand chair that someone else has spent hours sitting in. Hope the new chair rocks 💪

[@TenFeetDown]

Best reviews I have found, lowest subscriber count :(

[@doricohen8415]

Great review! I also got this chair a few months ago. 2 questions: 1) How do u get the armrests the same height? 2) doesn’t the plastic frame press ure thighs/back leg? 3) where did you look in order to know how to configure it to your body?

[@honestreviews5885]

Glad to hear you enjoyed the review! 🙂 I’ll answer each of your questions... 1. I just estimate the height of each arm rest by feel and sight when sat in the chair. If you really wanted to be sure they are both the same height, try putting a box over the two and use an spirit level to confirm (iPhone measure app has this included). But generally, just the way it feels has been enough for me. 2. I have not had issues with the frame and back of my leg. I sit fully back into the chair and have about a 4 finger width between the back of my knee and the frame. It could be that your chair height is not adjusted correctly? 3. There is an official HM Aeron adjustment video online which may help, here: kzbin.info/www/bejne/j3yqlGNuh8qlZ9k

[@ElliotWrightUK]

Another way to get them level is just to get them level in relation to what you're sitting against. Line them up with your desk and make sure they're both just as high as the desk, or wherever you want to put them.

[@zeemanmemon5329]

Just bought thanks to you! Btw Do you notice groin pain with yours? If so, please recommend a good way to adjust it And do you find it comfy sitting with pjs or jeans?

[@honestreviews5885]

Thanks for watching, and hope you're pleased with your recent purchase! I haven't noticed any groin pain with mine, but this suggests you may need to lower the height of your chair? If you are still facing issues, using a foot stool may also help with similar pains. The chair feels great in PJs or jeans :)

[@EatLeadPal]

I have severe back issues including crumbling vertebrae, ruptured disc and bulging disc. I've had my Aeron chair for about 3 weeks and it kills my back. I'm trying different adjustments but so far it still hurts. I already stupidly threw away the box so I don't think I can return it. I may have just wasted $1200.

[@honestreviews5885]

Hey, thanks for watching. Oh no, that's such a shame about your back pain! On the plus side, the Aeron holds it value very well in the second-hand (used) market, so if you can't return it to your retailer you could always try that? I've just done a review on the Embody chair which may be more suitable for you > kzbin.info/www/bejne/hHqVeolpqLeip7s

[@EatLeadPal]

@@honestreviews5885 HM is allowing me to return it for a full refund. I'll take a look at the video you linked.

[@pieyoman]

I find myself with upper back (thoracic) pain when sitting on this chair. When you sit do you have your whole back leaned against the chair or is there space between the backrest and your upper back? I find that having a pillow between my back and the upper part of the chair has helped me

[@miguelth652]

Thanks for the helpful video! I am considering buying one as well. I do notice that you don't touch te back fully with you shoulders, do you touch the plastic edges if you do so? And how tall are you? I'm around 6feet and the aeron looks a little bit on the shorten side in length, so I worried about touching the plastic with my shoulders when I put my back fully against the back. And last question, is it possible to mount a headrest on the chair? Keep up the good work, really nice review!

[@marcelbeaudoin3886]

If you;'re 6 feet, the C size may be your best bet.

[@honestreviews5885]

Hey there, thanks for watching! I'll answer your questions: I'm around 5-11 and the back stops just under my shoulder blades. I totally know what you mean that the short back may cause an issue for you. It is worth comparing the measurements between Size B and Size C on the HM website - remember the size C will also have a large seat pan too. It is possible to point a headrest, and the Atlas seems to be most favoured. Hope that helps you!

[@sebastiantorres9603]

Awesome review! Can I ask you, how tall are you? I'm 5'8 but size "B" looks shorter for my back :/.

[@cheesychester9647]

You're a B then. If you want more height get a taller chair or just get an Atlas headrest to pair with your Aeron and you'll be just fine

[@konanamegakure4342]

Definitely b bro. A is for smol tiny humans, c is for .. American/6'1+ and b meets most. :) Im 5'5 but broad shoulders, thicc thigs that save lives and chair is perfect size.

[@honestreviews5885]

Thanks for watching both! I'm 5'10 and a size B is what I have. Herman Miller have an interesting sizing chart in case you are interested, www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/other/ap_sizefitref_aeron_chairs.pdf

[@drblitz3092]

Mine comes in Saturday! Fully loaded

[@honestreviews5885]

Amazing! Not long now! What colour did you go for?

[@drblitz3092]

Grey on grey

[@honestreviews5885]

Excellent! Hope you’re enjoying it so far 🙂

[@MegamanNova]

How is it? Would appreiate an honest opinion about the chair and if it is worth the investment.

[@drblitz3092]

I Love it. It’s not soft, but it’s very supportive. Definitely fixing any posture issues. That forward tilt really makes this chair special

[@basicallybozo]

Hey there thanks for the helpful video, it's pretty obvious you've spent a fair bit getting to know this chair in and out. I have a couple of questions if you don't mind. 1. So if I understood correctly, do you actually keep the right armrest higher than the left one all the time? I have to admit I wouldn't have ever considered something like that but I can see how it makes sense. 2. Have you looked into the possibility of getting of the aftermarket headrests for the Aeron? some people seem to swear by them and I've seen the Atlas one being praised a lot. Thanks again for the review!

[@honestreviews5885]

No worries, I’m glad you found the video helpful! Sure, I’ll answer each of your questions: 1. Yes I do occasionally keep the right armrest higher but not all the time. I only tend to this this when I’m using the mouse more then the keyboard such as browsing through documents. For best posture however, both should be level so I’m cheating a bit 🤣 2. I’ve never felt that my neck is not supported so have not considered a headrest. I’ve too read good things about Atlas, but they are pricey $$

[@overclocked9033]

Hi, Thanks for the review! Does the aeron have the ability to stay locked in place while using the forward tilt ? Or does it always go back to the normal position by shifting weight backwards like you show on your review.

[@honestreviews5885]

Hey, thanks for watching! I think I understand your question as: When the backwards tilt limit is enabled, can you still use forward tilt? The answer to that is yes! So, you can restrict how far back you would like and still use the forward tilt function. I would also highlight, you cannot "lock" the forward tilt functions, it is either on or off. Hope that helps with your question?

[@mattwaddy1]

@@honestreviews5885 Just to add you can lock the forward tilt, you simply enable forward tilt and when leaning forwards you enable a further option on the tile restriction knob which when enabled locks the chair forwards.

[@konanamegakure4342]

Yes it does.

[@YouTubist666]

Nice review. 8:30 - PostureFit SL feature. For me, the effect is minimal to non-existent. Not sure it is worth the $100.

[@honestreviews5885]

Thanks very much! I think that's personal opinion on PostureFit SL, for some people it works great and for others less so. Unfortunately here in the UK there is no option to buy the chair (new) without it installed.

[@SuperMerlot]

I just took it off

[@carlosroberto366]

@@SuperMerlot how easy was it to remove it? I have heard some people say it gives them a "burning back sensation"

[@pistopit7142]

Hi, graet review. I have a slightly uneven hard flooring. I've heard there is no lock on the wheels to prevent this chair from moving. Could you advice, if in your experience, this chair will likealy to move easy on a hard floor, or maybe there is a bit of a tension on the wheels, so you actualy need to put a bit of force in order to move it. I was also wondering how long it takes for the chair being delivered. Herman Miller states that it could take up to 60 days if I select no standard build configuration. I think I would go for standard configuration but then website does not state how long it will take to deliver in such case. Did you have to wait long time from purchasing to having it delivered? Many thanks.

[@honestreviews5885]

Thanks for watching! I'll answer each of your questions: There is no lock on the wheels, and I have not really seen this used on office chairs before. I also use it on hard floor and it works fine. The best way to describe it, it can easily move around the floor when I move the chair myself. If you're looking for more tension, perhaps consider some after-market casters or indeed a special mat. Delivery time. HM in the UK takes about 10 working days. The Aeron is quite a popular chair so find it is well stocked amongst retailers. Thanks again!

[@LostStylus]

@@honestreviews5885 IKEA chairs come with pressure activated lock by default. Hate this "feature", whoever created it seems to have never used chairs before

[@healthiswealth9520]

Many say that posture fit SL is causing problem and not comfortable. What do you say?

[@honestreviews5885]

Hello, thanks for watching! I've found Posture Fit SL to be fine, and in fact I have found over the months I have been dialling it in more and more for a close fit as my body gets used to it. I would recommend starting at the lowest setting until your back gets more used to it. I've just done a review of the Embody Gaming chair that has a Backfit system instead which is quite interesting > kzbin.info/www/bejne/hHqVeolpqLeip7s

[@Ranger629]

I’ve been having the issue with my Herman Miller aeron, mainly the hamstring issues. I’ve been sitting on it for months now and it only recently started to bother me. I am not too sure what caused it, but it seems to not be due to the sitting position. Many people told me that I’ve gotten the wrong size (180cm and 86kg) and I gotten the size C. But I have a slightly bigger thigh and hip I realized that the size B caused it to be too small and tight for me instead. Do you have any recommendation on resolving this potential issue?

[@honestreviews5885]

Hello, thanks for watching! Given your size, I would say a size B would say would generally work better, but I have heard of some going for a size C. For hamstring issues, have you tried lowering the seat and/or using a foot rest? Getting the seat at the right height for me helped with the hamstring issues. I've just done a review of the Embody Gaming chair which may even suit you better > kzbin.info/www/bejne/hHqVeolpqLeip7s

[@Ranger629]

@@honestreviews5885 I have tried lowering the seat, it actually helps but the affected issue seems to become the height of my table is too high. I'll give food rest at try, but I may jump to an embody in the future. The Embody might completely eliminate all these issues that I have.

[@patrickglascoe1337]

@@Ranger629 try a roho cushion

[@RockTouching]

7:20 looks like the armrests are too wide for resting your arms on them, it's the problem I'm having

[@jamesmadison3108]

just bought the aeron. coming from a gaming chair with a lumbar roll, the posture fit SL seems to be non existent haha... not sure why.. its like minimal pressure only. unlike using a lumbar cushion roll on my gaming chair, i can definitely feel the support there. I thought the posturefit SL was faulty haha..

[@honestreviews5885]

That's a really interesting experience. For me I only have the PostureFit SL dialled in slightly before I notice it. Perhaps you need to use a lumbar cushion in addition to it?

[@jamesmadison3108]

@@honestreviews5885 nope it's not about that. It's because my body was too used to having a lumbar roll. If u ever use a lumbar roll, u surely know that it provides significant and strong support. So I surely felt the diff. Now that I use my aeron for a month, yea I can feel the posturefitn sl, but of course its not as pronounced as a lumbar roll

[@PlayGameToday]

Does the Mirra 2 better?

[@espressoarabic]

Just got my aeron gaming, and I'm devastated bc I had bad SI joint few years ago, and took me 2 years to be able to sit on chairs again, now I can only sit with lumbar roll on hard chair. Got the aeron thinking it will be better but immediately got pain in my SI, I think it's like stretching my scar tissue. I don't really want to give up on it, wat he'd your video hoping I would get some insight.

[@honestreviews5885]

Hey there, thanks for watching. I'm so sorry to hear about your back pain. I hope you've eventually been able to find a chair that works for you :)

[@AudiolandCH]

Hows it going with the aeron?

[@dawndare3949]

Very detailed review. Thank you.

[@honestreviews5885]

So glad to hear you enjoyed it!

[@Ryezn5057]

Do you prefer this or the embody?

[@gh00al]

Thanks--very helpful!

[@AndresReviews]

What color is it?

[@vicolemos]

Yes, please share that information :)

[@honestreviews5885]

Thanks for watching both, and so sorry for the late reply! The colour is graphite, which is the most common/popular Aeron colour choice

[@n654jvdja6]

Great review, thanks for that. Only find it a little funny that you suggest someone might buy a 1k + chair to end up using their laptop on their lap. Could also just sit on a crate in that case :)

[@honestreviews5885]

Thanks! Well believe it or not, that was the example I was given in the HM showroom for how the forward tilt could be used. I’ve used it for some other things like reading documents at my desk, trying to get closer to the screen. Basically, at any point where I find I am sitting more forward in the chair

[@limer4330]

You're still sitting. My wife said "don't you want to wait until you get your office set up in the spare bedroom". My reply was, I'm still sitting. I can push the chair into that room when the time comes. I need to save my back starting now.

[@areallyboredguy5825]

Consider steelcase leap v2 for multiple sitting postures.

[@bambusbjoerntech6932]

The Leap V2 is even more expensive :D I was thinking between the Aeron and the Leap and the Leap would've been 500€ extra.

[@areallyboredguy5825]

@@bambusbjoerntech6932 whoa that’s odd lol. Usually the aeron is more expensive. For refurbished the leap is often cheaper. Even from authroised dealers brand new the leap should be in the 700-1200 range but that’s usd. Situation may be different and looks to be in Europe

[@honestreviews5885]

Hey there, I'd love to try out the Leap V2 but unfortunately the chair is very hard to get hold of in the UK :/

[@FinanceNik]

Great Review! I just got a quite similar chair but the Aeron will keep being my aspired dream chair!

[@honestreviews5885]

Thanks so much - hope that Aeron dream comes true one day!

[@PeternVertue]

watching here friend

[@Awwwsheeeeeeit]

I'm thinking about purchasing this next month. When you were at the Herman Miller showroom, did you manage to try out the embody chair? If so, what were your initial impressions on it compared to the Areon Remastered?

[@honestreviews5885]

Hi there! I did manage to try out the embody chair - and will hopefully be doing another review in a few weeks, so watch this space ;) Some initial thoughts... The back is more narrow and takes some getting used to, it had a wider base, the padding on the base is not so much. My showroom experience was enough for me to decide on the Aeron over the embody, but I'll do a more detailed review soon :)

[@Awwwsheeeeeeit]

@@honestreviews5885 Awesome, I’ve subscribed! Looking forward to your future content :)

[@3tnt396]

Hi, thanks for video. I have tried the chair and it feels great. But the price is not good. It’s 2000£ in norway.

[@honestreviews5885]

That’s a high price! Have you considered purchasing from the UK or USA and paying to have it shipped to Norway? It may work out cheaper overall

[@3tnt396]

@@honestreviews5885 i have talked to the dealer in Norway, he told me he could go to about 14000 without taxes. But with the 25% taxes added it will be 17500kr. (1750£). If i were to ship if to norway i would have to pay 1300£ + vat (25%) + toll (import fees) + shipping. Not sure if the vat covers the taxes as well. In the end the price will be about the same, if not more. But thank you for trying to help.

[@3tnt396]

@ramonishere I will consider it too expensive. I think 1500£ for maxed out is the highest price they should offer. 1000£ would be the best.

[@honestreviews5885]

That’s a steep price! I believe they are cheapest in the US at $1000 USD, so prices seem a lot more expensive elsewhere

[@KOKOBC]

I can't pick between the embody and Aeron, I'm just gonna get both

[@honestreviews5885]

Thanks for watching! Sure, more chairs are better than one!

[@diyarpolat9823]

@@honestreviews5885 Hello, I have a question. I bought the 2020 Aeron remastered size B. I noticed some loose part on upper portion of the seat pan. it is where the mesh and the back seat pan intersects. There is a strap that goes around the edges. basically when I put pressure on the upper part of the strap it kinda moves in. it is just the upper part of the seat back pan. the rest looks more tight. Do you have the same issue ?

[@diyarpolat9823]

@@honestreviews5885 Another question. My 2020 aeron remastered armpads doesnt slide back and forth. I can pivot inward and outward tho. is it suppose to be like that?

[@diyarpolat9823]

@@honestreviews5885 By the way, I can email you a short clip of the issue I am talking about if you are ok with that. I just dont know if I explained it right with my words:)

[@abennett]

Awesome review.

[@honestreviews5885]

Thanks so much, I'm glad you enjoyed it!

[@naylanovotny2298]

did you buy it from the official website? i was trying to buy it but they herman miller has so bad rating in trustpilot...

[@honestreviews5885]

Hello! I didn’t buy from the Herman Miller website as their delivery times were a bit slower than others. I got it from one of Herman Miller’s authorised dealers. See this list here: www.hermanmiller.com/en_gb/where-to-buy/contact-a-dealer/ There are also plenty of other companies via a quick Google search. Best of luck with the chair purchase!

[@SeanLoke]

I bought the Aeron Gaming version (exactly the same as the original remastered, but in black) on Thursday 26th Nov direct from the Herman Miller website when they had their Black Friday sale (15% off), and it arrived yesterday, so it only took 4 working days.

[@dbbuster1238]

@@SeanLoke how are you liking the Aeron Gaming version of the chair? I'm considering getting the gaming version also

[@SeanLoke]

@@dbbuster1238 Definitely think it was worth the investment - I've had it for a few weeks now. Lower back pain had disappeared after a few days (which was mainly caused by using a SecretLabs Omega for 2 years). I work from home so for office use it's great (make sure you set it so you are able to rock backwards with only a slight bit of weight needed), and for gaming for long hours it's extremely comfortable. If you are like me and like to sit quite close you can adjust the seat to lean forward with back support. The gaming version, with it's full black colour, goes with my PC setup and I also purchased an Atlas headrest to top it off - www.amazon.co.uk/gp/product/B077D1K78F

[@drastic209562]

@@SeanLoke They have a spring sale going on right now also 15% off. Thinking about getting one

[@nssSmooge]

Do you think that arm rests are too wide for you? U look like someone with small shoulder width like me and that is one concern. As appose to steelcase, aeron doestn have their great arm rest close up function.

[@honestreviews5885]

Thanks for watching the review! I find the armrests are just right for me, and would say I have average shoulder width. With the armrests turned fully in, I find the arms rest next to my body. If they were any more narrow I think this would become a bit uncomfortable! Hope that helps, and good luck with whichever chair you decided to buy!

[@sbarter]

none of these extra features are "standard" from Herman Miller unless they only sell fully decked out chairs to the UK.

[@is9273]

UK Herman Miller store does only sell fully decked Aerons

[@nedryyy]

does that plastic front dig into legs?

[@honestreviews5885]

Hey, good question! Nope, I have not found the plastic front to dig in. It actually does dip at the front which reduces the impact of the plastic front. If you choose the right size Aeron then you should be ok - so for example, the largest size (C) would have the deepest seat pan and increased likelihood that the plastic front would dig into your legs. Thanks for watching!

[@nedryyy]

@@honestreviews5885 thanks for the reply. Subbed

[@kelvinth30]

classic aeron still the best 7 recline limiter positions , remastered only has 2 !! Lumbar pad on the classic is cheap and practical , remastered looks brilliant but quite useless really. and why do you need to the armrest to slide in and out on the remastered ? Your elbow cannot reach the back .

[@roqsteady5290]

It is so you can play the guitar.

[@philcliffe6909]

Took delivery of an Aeron recently. Disappointed in the product. Disgusted with customer service.

[@pr3t]

If the chair is beautifull is subjective... it's a classic, personally I like the modern looks of the embody more

[@sj22457889]

Is this C or B? thanks

[@honestreviews5885]

Hey there, it’s a size B!

[@peterwesterlund]

If it was £1000 in Sweden then I would buy it directly. It's £1700 in Sweden.

[@honestreviews5885]

That's a steep price!

[@Tony-nl6pf]

There's Herman Miller selling it for 1200 and other companies selling it for 650. Is this a joke?

[@is9273]

Who are these other companies selling it for 650?

[@SkALaXNiKoTiNe]

Your armrests are way too high.. They should be under your elbows when you are in that relaxed position, like most time of your video.. If you have shoulder and upper back problems it is manly because your arms are in the wrong position and make your muscles tense..

[@honestreviews5885]

Thanks for watching, and thanks for the feedback! I’ll keep that in mind 👍

[@SkALaXNiKoTiNe]

@@honestreviews5885 You're welcome. Maybe this video could help for the rest of the adjustments kzbin.info/www/bejne/rmKVeKGri56Endk

[@DenJoost]

All black chairs are dust magnets.

[@honestreviews5885]

Thanks for watching! Indeed, I have to give it a good clean once a week :D

[@alrightdave6135]

Wow, never heard that it takes time to bed in your body. Interesting

[@honestreviews5885]

Thanks for watching! Yes its kind of crazy right, but probably highlights how many chairs are out there that encourage bad posture. I've just uploaded my latest review on the Embody Gaming chair which may be of interest to you > kzbin.info/www/bejne/hHqVeolpqLeip7s

[@marcdicamillo9453]

Excellent review.

[@honestreviews5885]

Thank you so much, glad to hear you enjoyed it!