HHO Hydrogen Generator Separator. How to separate H2 - O2. Part 1

I present to you my hydrogen generator that separates hydrogen from oxygen. That's right, I got a little help from my boy 👌. It consists of 7 316L stainless steel plates. Anyone who wants to know more about how it was made can ask me, I have sketches and everything that is needed. I added a video with the necessary sketches • HHO Generator Separato... . My new hydrogen generator. electrolysis hho hydrogen fuel cell electrolysis of water. Hho cell. Green fuel
Генератор водорода

[@Inventive101]

Because someone asked me if I could separate hydrogen from oxygen, I made this generator 👍

[@Inventive101]

👍

[@Inventive101]

And it turned out very well

[@calebhouston5799]

@@Inventive101 That it did

[@matthewgodwin6688]

May be wave of future cause solar panels and wind mills arnt emp resistant

[@Inventive101]

@@matthewgodwin6688 👍

[@pcfreesoftware]

o wonderful you are so genius. many people try to separate H2 and O2 but they fail. you solve that issue. now we are waiting when you start a bike or any vehicle engine.

[@Inventive101]

Thank you very much, I will get there and I think

[@petergoestohollywood382]

What’s it with you fanatics and your fetish for running engines of hydrogen?

[@Inventive101]

As this generator said, I created it just to check if it is possible, for a test, it is my first H2 O2 separator. I think more will come

[@Inventive101]

And I did it

[@boringmachinepapabros6063]

Perfect project

[@cryptoworldgames]

its very nice design, but remember its h2 and 0, not h2 o2 :) also i think you should just put o and h on the container.

[@texanonline1244]

@@cryptoworldgames i said the same

[@laszloszell8753]

@@cryptoworldgames Don't put in the container. Pure hydrogen not explosive without oxygen. But if you mix the 2 gas you have a bomb. Just mix them before burning like oxy- acetylane

[@TrueIndie88]

The precision of this and design is off the charts solid. Thanks for a great video.

[@Inventive101]

Thank you very much

[@ahileapahos9942]

Not many have succeeded in this, or not so professionally, grade 10+

[@Inventive101]

Ahilea Pahos Thanks a lot

[@thewisefool3230]

ACTUALLY, they have... Just that the government hushes these people because of their need to keep us buying/needing their oil... You are aware of all the wars we fight over oil no? There was a guy who was literally assassinated by our government for using such tech in his water car in the 80s... FACTS! He perfected it. Furthermore, the government already has the patent for this tech, but of course they won't release it for the reason I previously disclosed. 🤷🏾‍♂️

[@nurphurecarnium]

@@thewisefool3230 you probably also believe on tesla tower, right? oh yeah fck the government!!!

[@Inventive101]

Here you have the schemes for those interested kzbin.info/www/bejne/jHvciZqCeMyEaKc

[@Inventive101]

😀😍

[@danyharrison5417]

Am dat intimplator de video este frumos sa te uiti cind face altul si nu stie decit teoretic ce il asteapta acest typ de generator este bun dar nu ca sa-l folosesti in system industrial deoarece se incalzeste repede si va exploda componentele din plastic vor ceda (ceva mai mare am avut montat in masina si acolo a explodat sub capota)de atunci nu mai folosesc decit systemul JOE CELL asta rezista si ii bag 80 de A pe el fara probleme direct din alternator(pe care l-am schimbat in masina si am bagat unul dublu de mare ca Amperaj de la Mercedes)tensiunea o am pe 24 de V pentru ca nu am mai avut chef sa trag 12V generatorul este folosit intr-un camion de epoca si avea prea putina putere cind urcam un deal simteai ca moare nu are decit 90 de CP dar cind pornesc Generatorul urca pe deal fara sa mai tuseasca pentru ca este 4X4 nu este mare 5,6T si nu are decit un conteiner de dormit si locuit in el(Expeditionfarzeug)ma bag cu el prin toate noroaiele si pina acum am iesit de peste tot afara in partea din fata am troliu de 20 de M lungime.Insa cum am spus Joe Cell este mult mai rezistenta este facuta tot din teava de inox si cu grosimea peretilor de 2 mm sint foarte multumit de ea.Cel mai frumos din video a fost faptul cind sa facut controlul final de catre Baietelu tau el a fost cel mai dulce .O seara faina iti doresc

[@Inventive101]

Multumesc

[@gabrielbotezatu3399]

You have achieved something that many do not, congratulations!

[@Inventive101]

Thanks buddy

[@Inventive101]

I'm still searching on youtube hho, I really like what I find there, I find myself too

[@Inventive101]

😂😂😂

[@BluefuelSystemsH2ogas]

Deci imi place ce ai facut dar e prea mare spatiul pentru circulatia apei si a currentului electric in partea de jos ........foarte mult current electric pierdut si in consecinta placutele vor produce gaz in partea de jos , partea de mijloc si sus nu vor face electroliza..... multa temperatura in apa si degradare foarte rapida in partea de jos iar separarea gazelor nu e completa

[@Inventive101]

Ms. este facut doar pt o demonstratie si merge foarte bine dar da pot fi facute unele schimbari, gauri mai mici si distanta micsorata, este loc, la urmatorul separator voi aplica unele chestii care am vazut eu ca nu sunt chiar ok, dar in general merge bine

[@BluefuelSystemsH2ogas]

@@Inventive101 Da e ok Intentia mea a fost constructiva si bine intentionata..... success

[@Inventive101]

Blue fuel Systems H2o gas Ms Ms, nici o problema

[@happytuber3669]

Hi, A truly brilliant and well presented project, it has to be the best one I've seen anywhere to date. Your very clever design appears to use the Hoffman principle for each of the three separate cells side by side, nice, very very nice. I'm aware that it's now July 2022 but may I enquire whether you have progressed even further with this project, and if so can you please post a link to such? Without wishing to sound 'cheesy' I personally commend you on your outstanding abilities, and equally so, on your willingness to openly share you knowledge with others. On behalf of those who have not said it, THANK YOU. Kind regards, John in the UK

[@gabrielbotezatu3399]

Amazing work, beautiful and cleanly crafted

[@Inventive101]

Gabriel Botezatu Thank you very much

[@spirugrigore5165]

Reduce the distance between the plates a little, very well worked

[@Inventive101]

Ok. 👍🏼

[@Inventive101]

I made a new separator, I'll let you know when the video is ready

[@spirugrigore5165]

you are the best

[@danimarian3626]

Frumos lucrat. Ce generator de impulsuri folosești? Am ceva salvat de multă vreme, dacă vrei caut schema electronică.

[@Inventive101]

Nu folosesc un generator de impulsuri in acest video, de obicei folosesc un regulator de amperi, dacă nu îți e greu muktumesc

[@danimarian3626]

@@Inventive101 să îmi lași un email

[@Inventive101]

[e-mail]

[@Inventive101]

[e-mail]

[@danieldragota2985]

Cum ai rezolvat problema incalzirii electrolitului?...poate rezervoarele sa fie metalice?sau montezi schimbatoare de caldura pe traseu?.multumesc.

[@Inventive101]

Daniel Dragota La acest generator, Separator de Hydrogen - Oxygen nu este cazul, nu se încălzește, sunt foarte multe metode in funcție de ce fel de munca ii dai generatorului, pot sa fie și metalice rezervoarele nu e o problema dar sa fie un metal cum ar fi inox

[@adamgeorge2523]

Asta caut de multa vreme, am vazut pe youtube multe generatoare de hidrogen care separa hidrogenul de oxigen dar din toate astea cred ca e cel mai perfect, am nevoie de schite te rog

[@Inventive101]

Ok, mulțumesc. Lasă o adresa de mail

[@byflo474]

Salut. Faci pe comanda? As avea nevoie un modul care sa produca 4-5litri/minut la 20A. Mulțumesc

[@Inventive101]

Pt ce vrei sa il folosesti? Da pot face

[@byflo474]

@@Inventive101 vreau sa fac incalzire centrala cu Hidrogen. Energia electrica colectata de la soare si vant sa o transform in H2. Teoretic nu imi trebuie sa scoata separat H2 si O2. Cat m-ar costa unul? Mulțumesc!

[@Inventive101]

@@byflo474 Da, nu ai nevoie de un Separator dar ai nevoie de ceva mai mare.

[@Inventive101]

@@byflo474 Cred ca unul ca acesta ar fi suficient kzbin.info/www/bejne/bZaVmHegf9ata7c

[@muhammadhaq7773]

Simply spectacular....My hats off to you.....I'm a novice but would like to try and put it in car....can I have more details...how can I contact you...thanks again....wasim

[@Inventive101]

I think we left all the details, yes you can use it on the car, [e-mail] is the email address

[@electronic7979]

Excellent

[@Inventive101]

THX

[@aggabus]

Those plate chambers are deep(to deep?) Though pretty.. They are spacious That extra room is it beneficial or just estetic.

[@Inventive101]

it is only made for tests. yes they are deep

[@ashokguru61]

If fitting are corrodes or not

[@Inventive101]

are corrodes

[@gabrielbotezatu3399]

Very interesting, it was a pleasure to watch something like that

[@Inventive101]

Gabriel Botezatu Thank you very much!

[@Inventive101]

It is my first Hho separator, a pleasant success, I received a lot of tips and apart from that I also found some things that go changed with it, it works very well but we are looking for performance so I will make another one with a few tweaks

[@spirugrigore5165]

Super

[@Inventive101]

Spiru Grigore Thank you

[@texanonline1244]

water is h2o not h2o2 ??

[@genghizalseitov3807]

I think the best one from other hydrogen generators in terms of separation.

[@Inventive101]

It was a success of mine, when I will have some small changes to make

[@hhohho4167]

Wouuu

[@Inventive101]

👍

[@nguyenxuquang]

Do you sell the parts to assemble.?

[@Inventive101]

I can do this. where do you live?

[@nguyenxuquang]

@@Inventive101 I live in Vietnam. Can it be shipped to or not?

[@Inventive101]

@@nguyenxuquang I don't know if there is a company that deals with shipping to Vietnam, I will be interested and I will tell you

[@nguyenxuquang]

@@Inventive101 Thanks very much.

[@Inventive101]

👍🏼

[@Inventive101]

Here are the sketches for this generator kzbin.info/www/bejne/Z3mueZmiZZlmn68

[@dimorphodon4607]

How can you use plastic? Plastic is not ions permable. You have different voltage gradient trough the holes and production is in the shortest path only. I have seen models based on permable membranes and they work.

[@Inventive101]

It works perfectly, there is enough space for electricity and water to flow to sign an electrolysis. I will make some changes and come back

[@dimorphodon4607]

@@Inventive101 but ions will search always for the shortest path. How do you overcome that? The distance between plates must be equal on all point. It may make gas but how about efficiency? Gas made lpm vs watts hours spent? Materials wear, etc. Building costs vs litres per minute etc.

[@Inventive101]

Thank you friends

[@louismorgan2679]

Absolute genius! Love it!

[@Inventive101]

Thank you very much

[@antonistzanopoulos8057]

Good job

[@marciosilvasena1026]

Olá vc tem pra vender este reator de idrogenio e quanto custa

[@antonistzanopoulos8057]

🙏👍🙏

[@Inventive101]

👍🏼👏🏼

[@JasonGreene]

Please run the system for two weeks and show how the stainless plates ended up. Will they get coated or not ?

[@Inventive101]

Ok I will do the same, anyway many possibilities have been discovered not to grind the plates, I will make a video with that, thanks for the message

[@guidotrisottoosti2002]

I'm making a similar one and I would like to know how you got these rubber rings between the steel sheets? How did you get it to be that exact size?

[@vicoltitus9753]

Interesanta ideea de a colecta gazul din spatele placii si fara membrana de schimb de ioni.... Dar asta te obliga sa ai mai multe puncte de colectare la gaz si celulele trebuie sa fie toate in paralel, facand imposibila o celula cu placi neutre si prin urmare are nevoie de un curent de amperaj mai mare si tensiune mai mica... Elementele din plexiglass ce delimiteaza incintele de colectare de gaz si fitingurile mai multe complica designul dar oricum arata super si merge la fel de bine... Eu lucrez la o celula cu placi neutre si separare de gaze si am o problema: Vreau distante cat mai mici intre elementi pentru o cadere de tensiune mai mica ca sa pot genera mai mult gaz la aceiasi putere instalata, dar acest lucru inhiba evacuarea de gaze care se aduna intre elementi, reducand astfel suprafata de contact co electrolitul si astfel miscsorand emisia... Mai ramane sa folosesc o pompa care sa introduca electrolit in celula, fortand astfel gasul sa iasa mai repede pe conductele de evacuare... Daca ai un astfel de model, m'ar ajuta un sfat , avand in vedere vasta ta experienta... Spor ! [e-mail]

[@magnitudematrix2653]

Put a strong magnet on both ends of the generator your out put will be higher add a little salt as well.

[@Inventive101]

I'll try, I'm curious, what will come out?

[@magnitudematrix2653]

@@Inventive101 Magnets act as a jewel thief or coil to electrical current so your output volume of gas will be higher.

[@Inventive101]

@@magnitudematrix2653 OK thanks

[@nofoxgiven6315]

What dose the magnet do?

[@magnitudematrix2653]

@@nofoxgiven6315 A magnet acts as a jewel thief or a doubler to electrical current so it will increase the volume of out put of the gas.

[@fpcg-_-tai3122]

very nice video. congratulations!

[@Inventive101]

Thank you very much

[@omnis8240]

Love your work. Where do you get the quad reduces. Are they 8 mm down to 6 mm. Cheers

[@Inventive101]

Thanks. I'm going to make some changes, reducing the distance in the first place. Cheers

[@Inventive101]

I will make a new separator soon

[@mememan2344]

Please do this is amazingly useful for anyone wanted to use hho

[@Inventive101]

@@mememan2344 Thank you very much friend, follow me that I still have a lot to do

[@Inventive101]

@@mememan2344 Thank you very much

[@mememan2344]

@@Inventive101 I have subscribed. With solar and this fuel, I will have all the power I need forever

[@Inventive101]

@@mememan2344 👍

[@mdrafiqul3358]

Thank you, you are doing a great job, what's up now, your prayers and best wishes, thank you😀

[@naseeralbarakati7929]

Thank you for such excellent work. Satisfying!! How could i get a copy of these sketches, please?

[@richsdv6337]

Temperature and Amps?

[@Inventive101]

I did not measure this but the temperature does not increase, there is enough distance and water circulation. I will make some changes and come back in detail

[@nofoxgiven6315]

2 questions how did you get the oxygen to seporate from the hydrogen? And are you running 6 plates on negative and 6 on posative?.

[@Inventive101]

7 boards in total, 4 on the positive and 3 on the negative. On the plates with positive comes out h2 and on the negative o2. There are some separators between them, and that's why I made an outlet for each plate

[@minidish]

This is the key to running any modern vehicle on HHO. If we were to convert water into Brown's gas into a compressed container we be driving a hydrogen bomb around yet if we are able to separate the hydrogen from the oxygen and then combine them at the point of intake into the combustion engine we will be much much safer. Therefore we could have a processing planned planted at a hydroelectrical outlet which doesn't cost anything to make electricity compress these gases into two different compressed cylinders run these two lines into the intake of the combustion engine retired the spark and drive around on water 100% safe. Of course some will argue that because you carry hydrogen and oxygen in the same vehicle it is dangerous but the only danger would be to drive it into fire and have both of them explode at the same time which is about the same as any automobile with gas these days.

[@mattraines6404]

the down side of storing Hydrogen is that by nature, Hydrogen, wants to bond with something else. so if you use Steal, Aluminum, iron ect the Hydrogen will work its way into the microscopic flaws in the metal and cause cracks. It will eventually lead to failure. I worked with some military engineers while in college and they were working with carbon fiber blend tanks to prevent this. To the best of my knowledge they were not successful.

[@minidish]

@@mattraines6404 Well, I would never have known this if you didn't tell me this. So, my question is How do they store it then? Or maybe, the tanks have a live expectancy and I replace after some time. When I look at this whole thing we're making a battery but the battery can run a piston engine or it can run an electric motor. As we know that hydrogen when bonded with oxygen makes electricity. It would be a very very efficient storage unit for energy is what I'm saying here so where there is a problem we can always come up with some solution. It is best to learn everything that we can but never give up trying

[@mattraines6404]

@@minidish the best solutions we came up with were to 1 use the hydrogen as its generated (whether as thermal energy or through Nafion as electrical energy) or 2 store the hydrogen short term as a gas (which requires special leak detectors bc hydrogen will displace o2 and can suffocate you) or storage as electrical energy in a battery or capacitor. In both cases you have energy loss.

[@mattraines6404]

@@minidish I found a video you may be interested in. On KZbin look up "Still think he is not legit... watch this and then decide " He addresses the storage of hydrogen and comments about the need to produce it on the fly with a reactor and the amount needed to run a v8. It's a good watch.

[@mattraines6404]

@@minidish something else he mentions is separating the H and O. This is very important and something hho generators over look. O makes an engine run lean and can cause severe damage. And thus takes away the available power H is making. I commented on a video (I remember if it was this one ) about using anodes and cathodes to separate the gases. He does that here. The units we experimented with used waste cathodes to remove O from the reactor system. ( down stream from actual reactor) the O would oxidize the cathode and at set point of run hours we would pull the cathode filter and replace it.

[@prajwala7330]

Hello bro really i loved it i was searching hard to find this type of seperator can you please send me sketches and some details of it that will be more helpful to me

[@4cventin]

Love this! Thanks man! ❤

[@Inventive101]

Like and subscribe 👍👍

[@wallypizza323]

That is a gorgeous build! I wanna make one.

[@user-ce3yz3ht4q]

I'm your fan and I'm really enjoying your video. Can I use aluminum instead of stainless steel?

[@nashe782]

should be changed in aluminium oxide

[@gabrielbotezatu3399]

Amazing

[@Inventive101]

Thank you very much

[@chettankaushal8938]

This is really good👍. Thanks a lot for the wonderfull information.🙏

[@Inventive101]

Thanks!!!

[@Inventive101]

Successful project

[@Inventive101]

👍🏼

[@aggabus]

Could wafer (weld) more plates (3?) Per chamber quadruple output

[@Inventive101]

separation can be done in many ways, and with shallower separators

[@aggabus]

@@Inventive101 .. sale production.amp??

[@dumbraveanvasy899]

Salut! Foarte frumos și profesionist! Dacă pui apă normală de la robinet și nu o amesteci cu nimic nu produce deloc hidrogen?

[@Inventive101]

Salut și mulțumesc. Ba da produci cu apa de la robinet dar se degradează placile

[@dumbraveanvasy899]

@@Inventive101 Mulțumesc de răspuns! 😁

[@Inventive101]

@@dumbraveanvasy899 Cu plăcere! 😉

[@bharathiredy7013]

Great work! can i know the current and voltage of the electricity?

[@tsancio]

Thank you!

[@Inventive101]

😉

[@unogazzy84]

Please sand the plates a little. More surface area more Hydrogen.

[@Inventive101]

I've seen someone do this, I haven't tried, maybe in the future

[@user-wv7vd4qf7c]

👍👍👍

[@Inventive101]

Μανωλης Παπαδακης 👍🏼

[@constantin2259]

Salut. Fain aparatul

[@Inventive101]

Mulțumesc, gasesti aici mai multe lucrări ale mele kzbin.info/aero/PLdKaKageZnXan1bLUt8IRuBw8q25-pecf

[@bellybutthole]

So pro! Cool! I've been thinking about seperating too, but i had a membrane in mind instead of plastic seperator. Membrane in the sense that electricity can flow trough it but not gas bubbles. I think one will have more design options with a membrane towards efficiency too. And I also thought as a safety measure, if one is planning on storing any amounts of the gases, to have them run through a catalyst to react any remaining hydrogen/oxygen respectively -then desiccant maybe;-) Happy building!

[@Inventive101]

Good ideas. I didn't even have all the materials I needed. Can be even better. good luck

[@aeh8446]

👍♥️👍

[@Inventive101]

👍

[@proxtrains]

After electrolysis how do you separate the hydrogen gas and the oxygen gas?

[@dz3r047]

Excellent contribution! Congratulations and muito obrigado

[@Inventive101]

Thank you very much

[@mojancevskialeksandar6955]

Hi, looks great, my compliments. Can you give us more details on how did you construct? how did you laser cut? how much pressure can the device handle?

[@albertoramonacosta1212]

Beatifil design and compact yes

[@Inventive101]

Thank you very much

[@danielstark2726]

I’d love to give this a try. Wonderfully done. Is there Anyway I could get the sketches and related information for the project?

[@Inventive101]

Advice, opinions?

[@Inventive101]

Bravo 🤣

[@thaddeusrose2598]

Would love to see the diagram. Are you just rotating positive and negative connection between each piece of metal

[@Inventive101]

they will be ready soon

[@thaddeusrose2598]

@@Inventive101 can not wait!!

[@Inventive101]

@@thaddeusrose2598 kzbin.info/www/bejne/jHvciZqCeMyEaKc

[@xxxmmm364]

Hey, I like your invention. May I ask for explanation of your invention. I watched your video many times, but couldn't figure out how does everything work. Would be thankful for the sketches too. Thanks in advance

[@ishufco]

Hello. Nice generator! Can you please send your complete sketches? I would like to try to build one for myself. Thank you.

[@Inventive101]

kzbin.info/www/bejne/Z3mueZmiZZlmn68

[@Inventive101]

you have absolutely all the sketches here, tell me if you don't understand something or if you still need help

[@barryparsons7874]

Very nice setup

[@Inventive101]

Thank you very much!

[@lukaspfitscher8737]

Is there realy no rust? If i am using NaOH insted of KOH is would it still produce no rust? Planing a 3d printed device like yours with made of tpu 😉 i am planing to make a small hydrogen elevator haha

[@Inventive101]

It does not produce rust. Good luck with that

[@unmeshprajapati23]

I want to buy

[@unmeshprajapati23]

Mobile [phone]

[@Inventive101]

where are you from?

[@Gamster420]

Fantastic ! Thanks for uploading!

[@user-wv7vd4qf7c]

Good project

[@spirugrigore5165]

👍

[@user-wv7vd4qf7c]

👍

[@Inventive101]

Thanks buddy

[@didanrahim7858]

Great work thank you very much, but the first plate is connected to the positive which is anode which means generating oxygen and you connected to the rest of the hydrogen which was very confusing to me otherwise beautiful work.

[@cosmingeorgianmarin7564]

bravo !!!!

[@Inventive101]

Multumesc

[@jaminthevanuk296]

Great design

[@Inventive101]

Thank you very much

[@brunohackspacher7861]

It is wonderful your information. Thank you!

[@Inventive101]

Thank you friend

[@dr.projectx5142]

This is very awesome. Have you made any that are 3x the size and with 50 plates ?? Would be interested. For the use for a torch to weld metal and melt glass.

[@BenAerens]

I can imagine you have some leakage from one gas to another. as it might leak at the sides of the opening at the bottom. Also I don't think you are using the plates to it's highest potential as there is no current in between them because of the plastic plate. Why didn't you go for a membrane?

[@Inventive101]

I will check if I have leaks, I am working on a new separator, give me an idea of ​​a membrane of what material

[@BenAerens]

@@Inventive101 What you want is a membrane that lets through the water with it's current, but keeps out the gas. you also want your plates to be as close to each other as you can for maximum efficiency.

[@Inventive101]

Please tell me a material that would allow water to circulate and air not

[@BenAerens]

@@Inventive101 Here are a few: - Polyester Monofilament Mesh (works with Sodium Hydroxide, NaOH) - Nylon Monofilament Mesh (works with Potassium Hydroxide, KOH) - Silkscreen Mesh, T165 - Uncoated Rip-Stop Nylon Everything needs to be a 300 cross thread count , per inch (or higher).

[@Inventive101]

@@BenAerens I'll look. Thank you

[@jb5music]

Guy can do it in his garage but Honda Yamaha Kawasaki Suzuki etc can't do it 10 years ago. Get the juice from KAIST institutes wireless induction road charging prototype.. 10 years ago. Of course buried and sidelined too. It's actually annoying to watch Homer Formbies toying with suppressed sabotaged technology from 10 years ago on such a small scale when we could all be driving around in silent, endlessly fueled transport vehicles already.

[@Inventive101]

👍

[@Inventive101]

I'm thinking of making this a gift too!

[@mdrafiqul3358]

Will be glad to know if I can current with it

[@gabrielaplay5598]

Very nice ❤️❤️❤️

[@Inventive101]

Gabriela Botezatu Thank you very much 😘😘😘

[@michealdumasii5432]

May I have the dimension for this one, also to achieve separation success what other alternative can I use if I do not have a drill to drill out screws for the gas ports?

[@ungureanuflorinradu6024]

Salut! De unde ai procurat materialele: Otel inox 316l, acele stuturi speciale, furtunasele, garnituri, etc?

[@gabrielaplay5598]

Very nice ❤️

[@Inventive101]

Gabriela Botezatu ❤️❤️❤️

[@hectorvargas9035]

Can you send me more information, I'm interested in your setup!!!

[@Inventive101]

Hector Vargas What information do you need? You have all the sketches in the link below, if you need something else I will be happy to help you. kzbin.info/www/bejne/jHvciZqCeMyEaKc

[@Inventive101]

Whatever you want to know, ask me. in general you can find all the secrets about me on the channel in my videos

[@dodiezresibemol]

At what voltage and current did it work in this video? Felicitari, foarte frumos arata.

[@Inventive101]

12V baterie auto. Mulțumesc

[@MrVetis]

I want one for my 350 banshee .. how much.. I've seen a few ideas but never this small and compact.. love the little hoses and the connectors btw. I have a electrolysis generator and i used a mmo screen to fight corrosion. Was pricey for a 2x4 in piece of metal.

[@crystalxi4238]

It's wonderful,But I know a new material is TItanium fiber felt

[@raghuveerdendukuri1762]

using stainless steel might give chromium oxide know, not good for health, construction of the electrolysis cell is nice

[@Inventive101]

thank you

[@petergoestohollywood382]

You are right, most chromium compounds are carcinogenic, but If you keep the current density within a secure range of about 10 mA/cm^2 for nickel alloy steel the accumulation of hexavalent chromium over time will be negligible. That is why I would recommend to maximize the electrodes dimension and NOT current density in order to increase output mass flow.

[@antonistzanopoulos8057]

😯😯😯💛👍🙏

[@Inventive101]

Thanks buddy

[@waleedrashad822]

Perfect

[@NoNamebojangels]

Hey well done! Could i get the sketches please? Id like to attempt this.

[@ghettocowboy993]

Your plates at that distance did it reduce the production

[@ghettocowboy993]

I'm confused, each side of the plate is the opposite polarity, one side positive one side negative. So how would this work

[@user-wv7vd4qf7c]

Nice