How To Frame Notch A G Body w/ Brown Sugar

Thanks for Watching!!!
High PSI tv Merchandise Available Below:
highpsitv.bigcartel.com
Help me get to 100,000 Subs. Yea I know its a big number.
Set your goals high.....
-------Be sure to subscribe TODAY
Big things coming SOON! Stay Tuned. You wont want to miss it.
Check me out on IG
high_psi_tv
Also be sure to check out John Doc
john_doc1
and
RPM Motorsports
rpm_motorsports_nc

[@kentshifflet9202]

Excellent job once again,Jeff!!!! You definitely rocked the good ol G Body... Love the video,Jon should be so lucky to have friends like you!!!! CUT AND WELD ON.....

[@wilsonmartin621]

Man, you once again, knocked it out the park!! good job Jeff

[@chriscollins4651]

Some of the best content on KZbin. Excellent stuff bud

[@newmantv5668]

love those G-Bodies, sold mine a few months ago but with your continuous tutorial. I might just get another and take my time. watching from Charlotte NC. Thanks

[@Simmonsracing187]

Great video jeff,im getting ready to do this to my Malibu, I'll be using a cutoff wheel and jackstands to do job,thanks for the good tips

[@PerrybuiltPerformance]

Helpful video! Makes me comfortable with the cutting I've done on mine this week. Time to get to welding

[@bigsmooth590]

Great job brother!!! I’ve been looking for a video like this forever. If you ever do a mini tub on a gbody please post it. Thanks

[@sandersmotorsports516]

I love the videos and how u make it look simple keep up the good content

[@06goatm6]

Great vid. Very interesting and just the right amount of detail and time lapse

[@FAFO1984]

About to notch my wagon. Thanks for the tips Jason

[@kdsboosted4954]

Perfect I'm about to do this to my 79 coupe "devillen" I've been hesitant because of thinning the frame but the inner support is all I needed to see and I'm originally a lowrider guy so a plate on the inside of the frame makes sense too. The only thing I'll do different is drill holes in both rear cross members and slide the connector bars inside and weld them.

[@hiddenman99]

Good video. This was a much needed topic to go over.

[@hiddenman99]

I have a gbody and never have i seen a complete vid on a frame notch..jeff is froggin talented and i envie his work space

[@LandonRoy-cv9rt]

I love the “G-body shuffle”!!

[@dillonroe7471]

Makin it sound simple I love it

[@hiddenman99]

Well done. One of these days I'm gonna do a notch on my wagon. In the drive way with a grinder/ cutoff blade and a 110v mig will be a bit tougher than the job you did. Wish you were colse to New Orleans I would sub out some work to you for sure!!!

[@hvysshvy7513]

Great informative video as always

[@donalddooley209]

Great vid learned a lot from watching it 👍

[@uncledeeznuts]

I was hoping you didn't catch the gas tank on fire good job man love the video

[@Dpiazza555]

Peep that Packard in the background! Can’t wait for that.

[@willr69420]

There is a pre-cut kit to do this? Who knew! Very cool.

[@MEANGENE]

Excellent work bro 💪👊☝

[@residentialservicesplus.1049]

Damn good job bro. 😎. Very detailed video.

[@Carolina_Squid]

As much as Id love to tackle this myself is this something you would want to do on an Elco?

[@DarrinSK]

does the cross support you welded in negatively affect handling for non drag application? like if I want to do a mild pro tourer?

[@nosfedss]

I have a question about the inner part of the wheel well. Did you show where you or how you hammered it or messaged it at?

[@DesTakeFlight]

What size tubing is that ? Looks good 👍🏽

[@MrOlds8488]

Is the bracing necessary if i have the umi shock mount brace?

[@acollins9277]

Nice work.

[@flawlessfades5044]

What’s the widest tire I can fit without tubbing I have a 295 30 20

[@dandrecoleman7976]

What coil spring can I use to clear 24s I was told s10, Buick, Roadster, Monte Carlo or k1500 with out a lift kit. Please help thanks

[@brividoofficialsite74]

Did that G-brace handle all the power your car makes?

[@JayBlack-st1du]

By doing the same thing.. can i get 315/60/15 to fit? 15x10 rim 5 1/2 Backspace? or will i have to mini tub car? same car 87 cutlass

[@khirybarton4556]

Are the 87 monte carlo ls. This smooth to frame notch

[@RonnieYoung-zx8wu]

What did you use to hold the back of the frame up so the rear quarters don't buckle

[@bighorn66]

Great Job !!

[@youngpimping12]

Great video, do you have a video of how to notch the front to a full turn on big wheels?

[@HighPSItv]

Ive never done it

[@rhyantbodyshop6970]

How long did it take you to knockout the frame

[@scottcurry187]

I have an 85 El Camino with a 10 inch rear rim that fits no problem with no frame notch, I want to get a 12 inch rear rim in there is that possible with a frame notch, I know Umi carries this frame notch kit I have full Umi suspension on the car now.

[@gregbowen9546]

Good video, I always just use the factory piece that I cut out . I try to cut 1" out of center but try to leave just a little bit of the round edge on top and bottom of frame and over lap the pieces. I think it's a little stronger and you don't have to buy nothing.

[@ryanh415]

Same thing I do . I'll cut the outer plate off at the seam top and bottom , remove coatings and rust from cut out and frame rail then clean it up with a grinder , tuck the other plate inside the rail then weld it back up . Been doing it like that on 1,500+ hp cars and 0 failures or bent frames .

[@betosgarage]

@@ryanh415this is good info. do i need to weld a 3/16 or 1/4 thick bar rail to rail prior to cutting?

[@benzermeno1850]

Here’s a dumb question. If I notch my GBody 1” on both side obviously. Can I shorten up my rear end by 1” on both sides in order to get a deep dish rim installed. Any opinion.

[@ericnegron4776]

Nice video man I just subscribed. I see the plates on the car are from n.c. I wonder if your close to me I'd like to get a price from you to do this and mini tub

[@calvinwilson1051]

Awesome job

[@gbodyrush]

Great video

[@romarbethea5511]

What the best way to notch the front of a g body cutlass supreme

[@1godgodgodgodgod]

tie in the frame ends on the bumper bracket.. huge!

[@deondimicks8159]

Very good vid

[@pokeyman8360]

Can u tell about knoch n 26 on my gbody 1987 ss monte carlo ss

[@mcgslugga2695]

I tried To Put My 24s On my Buick Regal I put adapters And A Spacer It Was Scrubbing the frame will this Help ❓

[@ericblakeney8776]

Good video thank you

[@blakbanshee]

Would you say that’s an 8-10 hour job? I mainly do Jeeps, but I have a customer with a Monte Carlo who wants a quote to do the job.

[@Bye401K]

can you fit a 305 back there now?

[@Grant7AutoWorksG7]

nice job....

[@jaredjohnson7269]

What size rim and tire

[@joshuasumter5632]

Hey bud great job...what kind of plasma cutter and welder is that?

[@HighPSItv]

Miller , from arc 3

[@robertward1880]

Know you made the video a while back but I might frame notch my cutlass. The video was head on!

[@jphallom2305]

Good job

[@trankiloreyes503]

How much cost this work ?

[@marshalljohnson3776]

Hey Jeff, been following you KZbin channel for a while. I’ve got a 87 Monte Carlo SS, and I’m trying to fit a 20x10.5 315/30/20 under the back. With a 1inch spacer, we’re just a little off (maybe 1inch). Do you think a frame notch would do the trick or is this mini tub time?

[@HighPSItv]

On a Monte, you probably will need a mini tub

[@bradmitchell2246]

Great video! I have an 85 el camino I’m looking to have some work done to. Can you DM me?

[@lsxcutty8739]

Great content. Can’t see where else you plan to strengthen the g body chassis. But How do you plan to mount the arb? My arb welded to the cross brace where you put the tubes forward

[@HighPSItv]

What's an ARB?

[@lsxcutty8739]

Anti roll bar

[@juanreyes3038]

Are you guys still working on cars if so can you send me the address I'm in nyc and would love to do the frame notch on my g body just let me know how much ok thank and keep up the good work

[@lachula001]

Where are you located??

[@FAFO1984]

Btw hope your back is much better

[@idlewild1964]

When you were cutting that out I thought it would weaken it considerably and how you were going to compensate! We have to give to get when Hot Rodding! Good Common Sense goes a long way

[@TerenceSawtellCA]

Great breakdown. Did you find the kit kind of pointless? I have the raw steel here to do this, and I was thinking of cutting out the piece, tracing the piece that comes out and cut it to fit. It seems pointless to buy the kit since you're already doing that anyway. Thoughts?

[@HighPSItv]

Thats how I did my first notch

[@BUDDAZO]

Get video where are u located

[@Titanmone]

My question is how deep or wide a wheel can u run once u do a notch 10? Or 11? I assume a tub would all few more inches

[@HighPSItv]

10 will fit great

[@jkbaker01]

How safe is it to notch it like that. I know you added bracing but isn't there still potential for bending? My old 69 Camaro used to bend the rails not even notched

[@HighPSItv]

All the suspension pickup points are forward of the notch. So it's all good

[@willieburden9171]

How much does something like this cost?

[@miket2607]

Nice! So what would something like this cost at a shop and the average turnaround?! I know different areas will cost more than others, just looking for a ballpark.

[@HighPSItv]

Probably Bout $1000 a And a few days.

[@burgergood3074]

What you charge to do tht

[@rvinson1988]

I was wondering do you think I would have to notch my cutlass frame for a 24x10 rear wheel..??

[@HighPSItv]

Depends on your wheel offset and what tire you run

[@vela505]

What size tube did you use ? I think i missed it. Thanks

[@HighPSItv]

1 3/4

[@drunkinmaster9417]

Nice work. Where are u located

[@HighPSItv]

Raleigh

[@devanerwin1570]

Great job, what would you charge for the whole job ??

[@HighPSItv]

About $1500

[@stefandwoodham]

You slammed the pipe in the rear!?

[@geronimo1462]

How much for you ro do my frame notch. Awesome video.

[@HighPSItv]

$1200

[@lsamaligod9744]

after completing the rear frame notch kit how big width wheels can fit back there x10? x10.5? x11? x12?

[@HighPSItv]

You can run an 11. But its tight

[@terrancewilliams31]

Hello are you taking any projects on such as this but I would like it to fit 24 x 12 in the rear with no problem

[@HighPSItv]

Im dont have room for any more projects currently

[@BrainHoper]

How much do that cost

[@seabcopeland2228]

Very nice job sup clean

[@dangerdogproductions7849]

Great video. Stock drum beaks on a drag car though.

[@FAFO1984]

Front brakes and parachute do all the work

[@BrainHoper]

Doing for years you must be a younger

[@garywilson790]

Think could you make a anti-roll bar with that attaches to that cross bar you welded across frame maybe attach coil over mounts to it too sell it as a kit

[@HighPSItv]

There are kits out there like that

[@garywilson790]

@@HighPSItv sweet thanks for the info building 86 pontiac 2+2 right now

[@steveicky4525]

He might want to add a shock tower brace frm UMI for more support with that notch if he hasn't already

[@Exzavier-kp1fn]

How many hours would you say you have into the notch.. that fitting up and all ?

[@HighPSItv]

About 4 hours

[@YouDakineAh]

What’s the back spacing on the wheel you’re gonna use. Might be doing this to my Malibu soon.

[@HighPSItv]

Should be 0 offset

[@YouDakineAh]

Thanks, what about the back spacing though. I think people been fitting 5 to 5 1/2 inches of wheel back spacing with the frame notch done.

[@betosgarage]

I was able to fit a 275 radial on mine with out notch . But I’m notching it to try & fit a 315 ona 10 or 11 wide wheel . Great video

[@Sxsutvrzrguy]

What width wheel and back spacing do you have

[@betosgarage]

15x9 4.5 cragar 342 I did roll fender & bang out inner wheel well on the lil spots where it rubbed . Fits like a charm now .

[@antjwan1]

@@betosgarage man this give me some hope cuz I didn't want to have to to this not right off the back I'm building my LS swap 370ci nitrous motor as we speak

[@betosgarage]

@@antjwan1 hell yea bro 💯💪

[@Yellaboimike]

All these months my car been @ RPM Motorsport I didn’t know that was you I would’ve been asked you about frame notching... I need someone to Frame Notch mines

[@HighPSItv]

Glad we got to talk about it

[@weldyourshitdro5262]

Do you cut both sides out then put in plates or one by one ?

[@HighPSItv]

I do one at a time

[@allbuick11]

What is the rim size that you're putting in there?

[@HighPSItv]

I think its 15 x 10

[@pcmfrenzy1089]

You mentioned the tire size, but you didn't mention the rim offset?

[@HighPSItv]

Normally its 10" wheel and 5" backspace

[@corey_3922]

Hey bro, is the rear end shortened at all? I am trying to fit a 22x9 inch wheel with like a 285/30/22 tire out back. I am going to notch frame but if i also shorten the rear end how will that work?

[@ryanh415]

You gotta knock your frame back enough to allow the fitment , but if you're shortening the rear AND doing the notch , you're gonna need to get it tubbed as well .

[@corey_3922]

@@ryanh415 appreciated bro

[@inscoredbz]

Without doing a mini tub, how much tire can you get in it? I'm wanting to run at least a 295/60-15 on a 10" wheel, but I want it tucked. Wondering if I need a mini tub as well.

[@HighPSItv]

U will probably have to mini tub

[@inscoredbz]

@@HighPSItv any idea how much more of the frame would need notched?

[@alfonsobarrera9077]

What's size welder did you use,

[@HighPSItv]

180

[@casterchatman1788]

When could you do.mine good job

[@HighPSItv]

I dont have the room right now for any more projects

[@lamontdockery5938]

Where did you order the gram notch kit?

[@HighPSItv]

UMI

[@LegacyGarage]

Does a 15x8 4.5 bs fit with this

[@HighPSItv]

I honestly dont know, but it should

[@TheWesDrake]

The pieces are probably scrap they throw in so they don't have to cut stock.

[@montecarlo6.0turbo]

Getting ready to c notch my monte ❤

[@Outlawoverlanding2015]

I have 295/50/15s on my 80' Cutlass, wanna go to a 305/50/15 how hard is a mini tub to do?

[@HighPSItv]

Its not fun, but do able

[@lgr_racing]

What backspace u running for that 295/50/15. ?