Hydraulic Cable Crimper - Conversion to Automated Operation

[@Jewelrymaker]

Well done! Looks like a great upgrade.

[@HighTechLab]

Thank you!!!

[@joshg1244]

Nice! That’s much nicer. Makes me want to buy more cables from you guys lol

[@adrianaionita1477]

În what order does the springs and ball bearings do go în?

[@landonferguson7282]

Pretty awesome little tool you made there.

[@MichaelRHead-zv2zf]

Any ideas on how to make it like an 18-volt crimper with a motor in there thay pumps

[@SacSityCorvette]

Hi, want hydraulic pump are you using? Thanks!

[@offgridtruckerdude7133]

We know what I'm doing next. Nice job. I had hoped you would have tested the connection, and cut it open to see the compression inside.

[@rongray4118]

Do you ever No-ox the wire before you crimp your cable?

[@SuperVstech]

How much did it all cost? Looks like a nice upgrade for sure.

[@tomcatmeow69]

this is a great video , only one of it's kind I can find on youtube. I am going to buy a tempco hydraulic hand tool with the dies from amazon very soon along with the 2510A pump so if you are an amazon affiliate provide a link and I would use it to help you out $ wise with whatever commission they give you.

[@HighTechLab]

Sadly I don’t have one…but consider getting your cable and lugs from my company, Current Connected. We are pretty competitive priced.

[@algeriekabyle2188]

Can you make us a video how to convert a hydraulic crimper into an electric crimper using a battery-powered screwdriver?

[@createcustoms6210]

How did this last! This is exactly what i want to do. I hate pumping one of these things up

[@HighTechLab]

@@createcustoms6210 still in use every day. Have to rebuild like once a year and change out the main pistons o ring.

[@Scat.original]

Excellent!

[@bigbigrichie]

What happened to the pressure gauge ..what's the pressure coming up to

[@HighTechLab]

Amazon didn't deliver on time :(

[@KillerJoeFIN]

Be careful to not overpressure the tool with pump. Even some hand pumped tools can broke with overpumping becouse hydraulic make so much force so tool metal gives away or/and the dies.

[@clydecox2108]

Good job. Of course you know the warrinte is completely out the window.

[@HighTechLab]

At the end of the day the only thing that really represents the original product is the dies

[@clydecox2108]

I was only kidding anyway. I'm all for modifying anything that needs better design.

[@randacnam7321]

At this level, the user is the warranty.

[@ChamdramNirban-wd9pf]

Hindi main batane ka kast kare

[@LouiseFoster-r1o]

Perez James Johnson Laura Harris Mark

[@BruceWheeler-c9o]

Lewis Anthony Miller Anthony Thomas Brenda

[@davestech6357]

I cringed when tightening the swivel. It seals on the i.d. no thread lock needed. Also you ruined it by making it too tight.

[@HighTechLab]

I was actually unsure about this, I figured extra seal didn't hurt and didn't get a good feel that it was tightened enough until I realized it was too late.

[@davestech6357]

@@HighTechLab its all good. I've seen people tighten them until there sideways and put 5000 psi. on them.