Wet Mix Macadem Proctore Compaction Test | MDD & OMC Of WMM_CRM_GranularSubBase

[@pqcrepairingaj1705]

Bahut acchi lagi thankyou Sahab is type se hi aap ham logon ki help kar sakte hain thank u dhanyvad

[@RohitKumar-ec6no]

Great video sir, please make video on Procter test for soil

[@santoshpradhan1062]

Thanks sir ,it was long time wish to see WMM and GSB proctor test. 🙏

[@DevMishra2023]

Useful Video...

[@debankurbaruah5728]

Nicely explained. Thanks

[@trongsarkayta]

What if some of the WMM material aggregates size are more than 37.5 since the max gradation of WMM is 53mm. What is your comments on this? And how he can take 70% combined from 22.4mm -4.75mm when he has already sieved by two different sieves?

[@hanumansingh1109]

Kamal kre deya bro tx tx

[@SahilSharma-vs6jb]

Sr gsb ke liye sieve kon c lagegei

[@dharamnishad7482]

Video quality ka option nahi but tesk knowledge excellent

[@dipakbhuyan4090]

Thanks

[@dharamnishad7482]

Yahi process gsb ke liy hai kya

[@HIGHWAYQAQC]

Yes only for Crushed stone GSB

[@akhileshprajapati7655]

Thanku sir

[@lokwanijay6977]

Sir nice practical informative explanation video about test.👍but I have qustion in when you said 37.5 mm passing 22.5 mm retained replacing with 22.5 mm retained and 4.75mm passing then in the calculation why fraction (A) 25% considered. any know about this please tell me. 🙏

[@SunilChauhan-vq7rl]

GSB G-3 ka gradation calculate kese krte h vo btaye sir

[@joy22july]

Sir 100% tak nhi aaya retain weight from each sieve after adding up A,B,C weight then what to do

[@HIGHWAYQAQC]

Pls dicuss this at our telegram channel. For promt reply.

[@arshadmrash]

Why should we repeat the test with another 6kg sample? Why can't we use the same specimen and repeat the test by increasing moisture content?

[@HIGHWAYQAQC]

If the soil is crush able we should not repeat by it, if it is not crush able like GSB, WMM do repeat it.

[@arshadmrash]

@@HIGHWAYQAQC how can we know weather a soil is crushable or not?

[@trongsarkayta]

You can't repeat by same sample because the water you added in the earlier sample must have lost in the form of evaporation during mixing and testing. When you increase the water content in the next test by adding additional water, it will not be accurate in actual water content. So, it is always better to use the new sample for each test for consistency.

[@dharamnishad7482]

Gsb Procter compaction

[@dineshprajapati693]

37.5 mm se pass or 22.4 mm pr retain sample ka use kya hua

[@HIGHWAYQAQC]

Usko replace karna he...use me Nahi lena he

[@debankurbaruah5728]

22.4 retained material doesnt help in compaction, but it's weight is required anyhow. They help in taking loads but proctor density is only about smaller material packing in a volume

[@sandhibanerjee9717]

Sir replacement kyse kare?

[@HIGHWAYQAQC]

Watch Complete video...we discussed every step in this video's

[@shambhudange8845]

1.Is this same process for Gsb Subgrade and Embankment material ?? 2.the material percentage u had taken its same percentage for all types of material ? 3.if u alredy know the percentage 70 and 30.. Then we have do directlya passing the 70 % of retain on 4.75mm... 30 % of pan.of total weight.. Is this correct or not ?

[@HIGHWAYQAQC]

Ans. 1 Only For GSB , If Soil ... IS 2720 P 8 criteria Shall applicable Ans 2. Material % Depend on Types of Mix Ans. 3 Although We Know % , Still we Need to do Sieve Analysis from Specific Sieves ie. 37.5,22.4,4.75

[@meshanqamar4498]

Sir method D clearly explain 19.5mm passing and 4.75mm retain why we are using 37.5mm sieve sir

[@HIGHWAYQAQC]

The Sample taken for Determine Retain% should be less then size 37.5 mm so we use it.

[@joy22july]

By using this method graph is not coming properly including density of gsb is coming 2.15 g/cc which is less

[@aamirabdulsalam]

fdt wahi same hoga

[@HIGHWAYQAQC]

Yes with 200 mm dia

[@abhinavkumar9735]

Sir Why 70:30, why not 60:40

[@omprakashmishra8066]

what is CRM

[@HIGHWAYQAQC]

Crusher run macadem

[@misbahulhakeem8358]

🎉