Hik Vision PT Camera DS-2CV2Q21FD-IW: How to WiFi Setup + Hik-Connect, by only Using Phone.

This Video are showing:
How we setup the new unit of Hik Vision PT Camera (DS-2CV2Q21FD-IW) by using mobile phone.
Material Involve:
PT Camera (DS-2CV2Q21FD-IW)
Android Phone
Wifi (Required SSID and Password)

[@cherlannerivas39]

Hi can you show me how to reconnect that exact cctv to the wifi if ever we change the wifi password please

[@stormlitsayala1572]

thank you sir.. God bless.

[@RyanGodiee]

Thanks for sharing I really appreciate it

[@闹天宫武曲]

tq bro, and one more question,256gb can support how many hour？

[@securityproducthelper2971]

Roughly 135 hour =approx 5 days

[@Shaina30Magnaye]

Hello if I got wifi connect it to my house and I'm going to move the camera to other house did I need to reconnect again?

[@securityproducthelper2971]

As long the Wifi are under the coverage. Answer is “Yes”

[@DASH1497]

Thanks for this good video

[@viekhs]

Thank you for sharing 😊

[@dtkl36]

Hi Bro...how to change to another wifi network...? Right now connected to wifi 1...and I changed router with diff ssid. Want to change to wifi 2 with diff password. Besides that..how to upgrade the firmware..? Thanks in advance sir. Appreciate it.😊

[@securityproducthelper2971]

@@dtkl36 ~>Upgrade firmware: As long u able access to the web browser u can upgrade thru configuration > maintenance page there ~> changing of router + SSID However, this problem always happen ard my friend and SI. However, u need attach LAN cable to that camera and go to WiFi Setting to do it the connection. *i prefer u get a reyee wifi router eg:EW1800GX PRO, this model able broadcast 3 SSID, so can use 1 SSID for camera or ioT product

[@ronniedelacruz2458]

hi sir is this hikvsion Q1 can still continue record in sd card even when the wifi sudden down ? is there continues record if offlline?

[@securityproducthelper2971]

If u use this Q1 camera as standalone yes. Cause the camera will record to SD card, even WiFi is down.

[@ronniedelacruz2458]

@@securityproducthelper2971 Hi Sir thank you!!. one more question sir .. if i use 256gb in Q1 hikvision although the capacity is 128gb .. is there is a possible to still work the 256gb sd card in Q1?

[@DanYeo-c7d]

When I set to audio mode will the camera unit hear my back ground noise ? Thanks

[@securityproducthelper2971]

Yes, usually will heard. U can adjust the gain by accessing by web browsing directly by computer.

[@zainabibrahim4316]

「もっと多くの人が必要なので、このビデオをもっと

[@winthanlay7664]

How to setup that camera already used my sister and now she not used and forgot account and password? I would like to use it with new account? Thanks

[@securityproducthelper2971]

Hi sir, you can reset the camera by using the camera reset button (it is located beside the sd card slot). After done reset you will need to unbind the camera from previous account by using this method (kzbin.info/www/bejne/jHupfICwYs6UiZY).Then you are good to go.

[@phengkim2595]

I have tried to reset my camera. Yet, the WIFI of camera still not exist which aren’t able to set up.

[@86hafifi]

Hi sir, can i used power 5v 2A?..because cctv spec is 5V 1.4A

[@securityproducthelper2971]

Can, Ampere little higher ok, but dun over until 6A or above, might will harm to ur equipment

[@alexshah7277]

Hi sir... How to set up full recording through apps... Now the device only recorded base only motion recordings..

[@securityproducthelper2971]

Not possible to change the record setting on apps for now, you may access to this camera setting by using web browser and the camera ip address then manually change it to 24h record

[@harishamid5455]

Hi bro how to find that code. I cant see mine just a barcode only. Im using hikvision model DS which has no router yet

[@securityproducthelper2971]

Means your camera dun have barcode sn on it?

[@harishamid5455]

@@securityproducthelper2971 yess

[@securityproducthelper2971]

@@harishamid5455 this is weird, Hik Vision, usually have provide QR code, to let enduser to scan. Kindly contact ur vendor.

[@saralaaarchu337]

Hi..why my camera only shows red led..initially comes blue light but then go off..

[@securityproducthelper2971]

Try to reset camera thru the cover at the camera. It still red, i think u need try on manual. Please check on my manual add method for this PT camera

[@UmpakChupa-sv4ry]

Hello do you have a firmware update for this PT camera DS-2CV2Q21FD-IW

[@securityproducthelper2971]

Hi, you can get the latest firmware of this camera from Hikvision official website

[@jelaneopiana6116]

Where to put the SD card po and can it be 256gb

[@securityproducthelper2971]

right bottom of the camera lens, max only 128GB(after firmware upgraded)

[@ASPIreVChannel]

Playback pls using this and sdcard scheck

[@EditoraClockTower]

Thanks

[@securityproducthelper2971]

Welcome

[@danielong911]

I cannot add device even after resetting. After following all the steps my camera flashes red.

[@waana8065]

Mine also the red light is on & tried to ask the seller to help till now no response😢

[@securityproducthelper2971]

Hi, if the method in the video is not work for you, you may check this out kzbin.info/www/bejne/f6PUXquiqbt_hbcsi=H2qDavG18NjKWVa_

[@claran41351]

If I forgot the activation code how do I reset?

[@claran41351]

The wifi connect to camera I forgot the Pw. How do I reset? 😢

[@securityproducthelper2971]

There are no choice, u need bring it down, and press the reset button located below on the camera

[@RichardApolonio-ql4cb]

Hi connect

[@maysimach7423]

Yôu àre thé béßt

[@maysimach7423]

from hi

[@helplinerepairservices]

Hi sir, how to mirror that camera? or how to flip?

[@securityproducthelper2971]

U need enter web browser at this moment. As i know new version we can mirror the camera thru mobile apps