Coax TV Cable stripping connector install - Compression and Threaded

They also sell a tool for it on amazon: amzn.to/2eebBXh
If using a razor blade, cut softly and just enough to pull off the sheath. To see the difference of an RG6 and an RG59 coax, watch this: • The difference between...
They also sell a tool for it on amazon: amzn.to/2eebBXh

[@JoshKrueger-fs3yn]

Really appreciate the fact that you showed options on how to do it at home w/o specially designed tools. I have one cable in my house that needs repairing so this was very helpful.

[@rathalostitanXII]

So I actually do this for a living and I would highly recommend to buy the proper tools for this. The reason for this, is because of the complexity of information that goes through these cables now a days, a simple score of the center conductor, or even having a center conductor too long or too short, can cause issues. By the way, the foam part is called a dielectric. 😑

[@pmAdministrator]

You only need a tool if you dont know how to measure it to the standard and cut it yourself. You can spend money on a tool or you can just use a measuring tape, blade and your eyes to do it.

[@Tpurc]

@@pmAdministrator If you're in a bind, maybe. Spend the $10-$15 and get the tool. One small score on that center conductor and you can cause a whole host of issues.

[@elchuyito355]

i also do this for a living and you would be getting a retrain or a write up for this lol. just saying.

[@otallono]

This is a sign of someone thinking their job is rocket science. If he called the dielectric by name, no one would know what he's talking about.

[@otallono]

@@Tpurc then don't score the center conductor? Learning how to use a razor blade properly is the same as anything else.

[@shazam8572]

Tools required for this are: Razor blade, band-aid, antiseptic.

[@MrTarkus007]

+Shazam lolol

[@namewithheld7835]

This is bullshit.. This is how not to do it

[@craiga.johnson2240]

Shazam g

[@johnsushi2007]

Don't care for this at all. It safe, plus there's a good chance your blade could score the center conductor.

[@dbs5817]

John McGaughey kyjjjhplj

[@natenottke3738]

Thanks for the detailed instructions and clear video. I followed these instructions to install a RG6 faceplate for about $10. Verizon wanted $150 for the appointment.

[@G5questman]

Thank you for in depth up close video.I bought cheap connectors in kit like you use and struggled to compress them to stay on. This video helped show exactly what to do.

[@lusa3002]

OOOH!!! and here i am squeezing the conectors with universal pliers...😂

[@rosebrown5332]

Thank you so much! I nearly had to pay a technician to come and help me with this, but your tutorial was so easy. I really appreciate it!

[@Phurlo]

You should still pay for a technician. Most cable companies say they charge but it's up to the Tech if he wants to charge and well, most of us dont. Taking shortcuts with this stuff comes with serious consequences. Sometimes not for yourself but for your neighbors if other frequencies start to leak into an improperly connected fitting.

[@irishguy200007]

I was given two of these by someone but looking back the connector was already crimped from the shop and I couldn't understand how to put the cable in and got pissed off and bought a few screw in type connectors. Now I understand, Thank you.

[@bretts1]

I bought a kit with strippers, crimping tool and good connectors and I had to use it when mowers hit wires Dish did not bury deep enough or for my own use running wires to TVs. For what I spent on those junk screw in connectors that come off, I could of paid for the professional kit years ago, and saved myself the time and aggravation of the cheap connectors falling off. Put tools and connectors in a nice zip canvass bag and hang in garage or place after every use. Your picture will be better and savings alone on screw in connectors and trying to cut wire to exact length will more than offset the cost of the kit. Just don’t let anyone borrow it or when you need it, I found they have it hanging on their garage wall thinking I forget. Hate folks that borrow stuff and have to call to get it back or they bring stuff back dirty or broken. They ruined it for other folks that wanted to borrow stuff.

[@samirkazah302]

Thanks man, I had to cut the connector off one end of the cable so I can pull it through a hole in the wall and reattach it, this helped a lot

[@stupid_tree7158]

I'm a satellite technician, but I do this when I accidently leave my shit at a customer's house lol

[@ryanbelknap814]

Stupid_Tree lol

[@schulz461]

FYI. The center conductor on rg-6 cable is copper-clad steel. Buy using a razor blade you are most likely severing the copper, thus losing most of your outer band. Kline Tools makes the best coax stripper I have ever used and it costs $11 at Home Depot.

[@HillBrosTech]

Good to know! Thanks!

[@jaiden9898]

.

[@jaiden9898]

***** "Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist Scientist" Rocket scientist + Heart surgeon = Rocket surgeon, or heart scientist.

[@jaiden9898]

***** .

[@mosesc5219]

***** Can't have a senior moment when you're 17. He had a teenage boy moment, plus... I kind of like the "rocket surgeon" thing. I'm going to use it.

[@rudetoy8264]

Glad that I found this channel! One off installation and precautions are what I need. Not able to buy RG6 compression and crimper kit as we live very remote area, so this is the most useful instructional video thus far!

[@francoisesthoer]

Comment faire tenir le raccordement et avec quoi

[@Simmons479]

You need to be really careful when running the razor around the center conductor because all the signal travels on the outside of it. If you scratch it or cut into it you could get intermittent issues and repeat trouble calls.

[@RideRedRacer]

+Rick Simmons those repeat trouble calls are the worst haha.

[@dukeraoul2742]

Rick Simmons good lookin out homeslice

[@roadchuck59]

Rick Simmons use a dull pocket knife to cut outer insulation, then get your razor to cut braid. Dielectric shield will cut easily with your pocket knife.

[@andriahunter--thewomenshoc2963]

This video answered all of my questions! My main problem was that I wasn't pushing the fitting far enough onto the cable. Thank you.

[@qartoossjee1390]

I found this very helpful because it was what I was looking for because I got the tool and push on connectors but neither had instructions on how the cable should be cut and prepared to use with these.

[@ktkyt]

Thanks. Moved my cable myself. These instructions are great. Bought the tools at home depot to make it easier.

[@aharonwsmith]

great DIY video! perfect for someone who doesn't want to buy the expensive tools and it shows how to do this. thank you!!! You are so awesome!!!!!

[@lacowie]

Hey dude I just did that thanks to your no tool tutorial. Cheers!

[@francismcgann3515]

Omg life saver, my nans wire almost gave up the ghost when I moved furniture to put her Christmas tree up, and as I was putting things away it pung out of the wall and the copper end snpped, I tried to fix it for half an hour and failed and watched the video and fixed the TV, yayyy one less thing to get moaned at

[@sonson2884]

Omg mate I luv ya! Lol.i stripped the wire several times but didn't work and then I gave up until I watched your video and it worked first time! Thanks so much!

[@breezy1098]

Thank you! I used a wide mouth plier to crimp a compression fitting with ease! Thank you this was very helpful.

[@borthewolf3376]

First cut the core free. The outer sleeve will protect and keep the braid in place while you are cutting. It gives a much cleaner cut. Then make your second cut to expose the braid and foil. Never cut all the way, scratch the vinyl partially so the knife does not touch the core (first cut) or the braid (second cut). Then pull the vinyl or foam, it will tear along the scratch you made. Much better is to use tools designed for the job. These tools guarantee a good cut without damage to the core/braid and they cut at exactly the right spot. Why not spend a few dollars for the right tools?. They are cheap compared to what you spend on your TV equipment.

[@yourguardianangel4714]

hi there but what the name of the tool?

[@psuedonymephedra]

The True Thug's 4Life Not telling you with a name like that...

[@saravanasaravana8821]

Bor the Wolf no no no trey

[@BBaker916]

That's not the point of this video. But haters gonna hate.

[@mangos2888]

You should make a video of your suggestion

[@Fishingkyle]

The tool made for stripping the cable does far better job than a razor blade, if you’re going to make your own connections, get the correct tools. All of the compression fittings were good, but not the twist on fittings. They can easily fall off and just cause problems. I replaced every one that I saw when I worked at Comcast on installs and trouble calls.

[@EDChero]

Thank you! Harbor Freight had the tool for $15 and I was able to bust out a repair in less than 10 minutes.

[@pattrell5257]

If you don't have a razor blade, you can also use some kind of knife(kitchen or pocket). I have done that for years going back to the analog only days decades ago when they had the rectangular brown, wrap around the TV screw cables(used to be popularized by the large outdoor antennas) and on the cylindrical black or white cables that you buy in stores with the pin tip.

[@Sebastian-on4fq]

Which connector is better?

[@hotrodhotrod-wc3bu]

see this is,what im talking about. ive watched about 4 or 5 of these damn thing and had to listen to these people ramble on and on about nothing. this guy shows you and dose it without all the bullshit. thanks bud i do appreciate it.

[@Phurlo]

Except this is what causes leaks in your signal and it's where you pixelation starts or slow internet which will then back feed into the plant causing issues for your neighbors.

[@SankiKingOfficial]

Eli Yo then how to do it properly man, atleast mention the damn process please if you know!!!!

[@sriyantra1939]

@@SankiKingOfficial.... remove 2nd shield i.e., stiker type aluminium foil also; to keep distance from center conductor.

[@MaxCamacho]

Been about 4 years since I seen this video. Which helped me back then. Forgot how to do it today. Put this video on and voila. It's 2 quarter inches and not 2 half inches. Good to go!

[@latefao82]

Hello I like you channel very mutch you are Amazing, welcome to my channel thanks 💐🌹🙏🙏🙏🤗🤗🤗👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@MaxCamacho]

@@latefao82 your welcome. Thank you! Take care ✌😉🎈

[@grimtoxic9847]

Do I make sure my power is off so I don’t tase my self

[@Sealink432]

Thank you for showing this practical of cable terminal job, I appreciate your helping video, You are taking Efforts for showing these things, Once again Thank you & Best Wishes for your future journey. Please bring more videos for Our People.🙏🙏

[@DanielinLaTuna]

Thanks, this was very useful because I WAS going to buy a special tool that I'd only use once. I'm moving a cable from one room to another and the hole in the floor that the installer drilled is just big enough for the cable, but not for the completed termination. Once again, thank you.

[@007kitkit8]

Thanks. I was just about to go and buy the rotary cutter then saw your method. Saved me £15 : )

[@angelicastrong458]

Thank you being succinct in your tutorial. Most videos are so long-winded!

[@vangtone]

Kudos on the razor blade! " you don't just wanna ... GO FOR IT!! " lol got me good

[@fatima__2344]

Another guy with newer and better tools did it the exact same way and it worked for me so I’m assuming this way would work as well as the overall installation was the same

[@BosunM8James]

I would recommend the threaded connections you can pick up at Walmart. Worked easy for me using only a pocket knife.

[@kappakeepo4499]

Wait till you get filtered for noise because your connections are leaking …call a tech

[@derricks8818]

Worked great for me, thanks!! I pulled down the one from the pole to my house with a semi.

[@nike1rosa]

I know what I’m doing tonight 👍🏼👌🏻thanks for the great video

[@Doxymeister]

Thank you for taking the mystery out of it! I'm a technologically-challenged person and this was a great help.

[@nickkitchen7524]

Great video quality. Nice, clear, and smooth playback.

[@heatherkiss2229]

The little blue thing just disappeared that was awesome.

[@Phlacc]

Aww, man. I bought the special tools and came here to find out how to use them 😂

[@wgsmcw2012]

Thanks for video! I live in a ghetto apartment, that when I moved in, the cable outside my apartment got cut. Had Comcast fix it when I moved in, but this might happen again, so thought I would look up a video on this issue.

[@bryanschannel6452]

Quick question. I'm prewiring my house and noticed that if I do not shorten the braid in my RG6 to approximately 4mm, it will extend past the barrel connectors once they are compressed on. Some sites seem to recommend cutting any braid that extends after compressing the connector on but I'm hesitant to take a razor blade to coax. Is it okay to simply cut the RG6 braid to roughly 4mm and compress on as usual or is this likely to cause me signal degradation? Thanks in advance for your reply.

[@redskyatnight165]

As the guy who's gonna have to come fix this: Leave a lot of extra cables at your outlets and wherever you're going to make the main connections. (for a couple reasons). 1. If you have extra braiding you can pull the connector off and try again without compressing. Just cut off what you just did and do it again till you get it right. A tiny bit of braiding isn't the end of the world but if it comes into contact with anything you risk a short. 2. When you want to put these connections to use, the technician will have enough extra wire to cut off your connectors and to them right. It's common practice for technicians to do "the last mile" i.e. Install the F connectors and connect them to wall plates. So you really don't have to worry about it in the first place. Also, most technicians are so annoyed with people telling them that they didn't mess with the wiring (after they obviously did) that if you ask them to do it correctly most will just take care of it so they know it's done right. Thanks and good luck.

[@redskyatnight165]

RS3Sub I'm sure lots of engineers troll KZbin comments (while learning how to prep coax) to call strangers "idiots". Do us a favor and call before you knock out your neighbors service. Kthxbye

[@danielwalsh8405]

a good refresher, having suffered through the process. (last wk.)

[@olatunbosundare6073]

This is an awesome video, however, I still think tools are made for you to do the job effectively and efficiently, the tools don't cost that much. and if you are dealing with coax cable jobs, best if you might as well get the tool. Using the blade, if not being careful, you can cut your fingers by mistake, or even get cut from the shield, or even cut it out of the proper length. If it just a quick job and you are a pro, then you can avoid the tools, but if it a major job of running cables such as extending your tv signal cable , just like what I am about to do, get the tools, it is definitely worth it...

[@N-Scale]

Thanks for taking the time to do this. Mike

[@Matthew-nm4bl]

Please do not use twist on fittings. You will cause ingress/egress and create noise back feeding into the plant interfering with not only yours but your neighbors on the same node. Which could result in a preventative maintenance tech at your door or worse your services being deactivated until fixed. All depending on how much your cable company values their quality of service. If you are doing this just for an antenna please disregard this. You can always stop at your local cable company and get a professional cable to needed length and their standards for free. Keep fittings screwed on tight please. Cable technician here.

[@fox428]

i used the plain one without any tools. You just screw it on by handand it holds quite strong.

[@cloedasilva7459]

Thank you so much, I had no idea how to do this but with your video, it was a walk in the Park 🙂

[@oliverstevenson1077]

Rather than folding the wires down can you just cut them off? Are they actually necessary for the connection?

[@rorygoldsmith14]

Oliver Stevenson much better to just cut them off otherwise you may experience a faulty signal

[@salmanthebestful]

Could anyone tell me how to remove the connection

[@rjahi]

Cut it and prep a new one

[@FromTheHood2TheWoods]

Thank you for this video! You just saved me $100 Xfinity wanted to come out and charge me but I’ll just fix itq

[@garyr7027]

For 20 bucks at Amazon you can buy the crimper, strippers, and 10 f type connectors in a kit. Those screw on type connectors are junk, all they do is ruin the cable. When crimping a new connector, it isn't necessary to peel back the braided wire overlapping the outer insulater, it's why you had a tough time putting that connector on. If done right those connectors slide right on fairly easy, just leave the braided wire as is.

[@agonquin]

could I repair a damage outdoor RG6 satellite cable with coupling or will weathering effect it over time? because the reason I am asking is a service guy came by less than a year ago cut out the bad cable and installed 2 couplings. Now after this band-aid repair one of the cable connector corroded to the point loss signal again a 2nd time! What could have this repair guy done different?

[@dmac5678]

My coax cable isn’t labeled with which type of endpoint I need. I know it’s older what should I do? I tried using rg6-quad connector it was too big I think.

[@nerdicus15]

Thanks for the vid! I have issues with my new location and have tried everything else but rebuilding the cable. I have reset the modem numerous times, checked my ethernet cables, check my PC port, and contacted my ISP to make sure my equipment is working correctly. Hopefully this will be the end of my network troubles :)

[@jamietomlin265]

Thanks for taking the time to make this video very helpful 👍🏼

[@DATONEGAMER25]

Can anyone help me with my question. I bought an xfinity self install kit. They say to find a coax outlet to screw the coax cable into provided by Comcast. But the room I want to use already has a cable coming out of the outlet that could screw into the Comcast modem. Could I just use the cable already coming out of the wall? Or do I have to use the screw on outlet? If that makes sense... male/female.

[@MrTarkus007]

that was real nice i would like to know what that tool costs &what it's called there's a electronic store near my place & i just love to buy tools n gadgets. it's really professionally done. even though u said no tools lolol

[@markgiacalone9800]

Many thanks. I was able to run my own cable - no technician 4 hour window.

[@mikemeyer7969]

If I could buy you a beer I would!

[@mr.profezzional6935]

THANKS SO MUCH I finally found the video I was looking for

[@jcv71]

great tutorial. A side question, what video camera or lenses did you use, looks very sharp up that close.

[@bagustrylaksono9003]

Maybe waits more than few years, to get his replay...

[@captainsparkzz]

@@bagustrylaksono9003 5years ago🤣

[@sriyantra1939]

Camera man/photographer Not technical/electrician

[@didot]

using huawei P30 before the US govt ban

[@stevenvilla641]

Make sure none of the silver treads are touching center conductor. That will cause interference

[@be236]

Once you compress this F-connector in place.... is it possible to take it out and re-use it again? Or is this basically permanent connection?

[@potatochobit]

how do you get the blue connector off without cutting the cable?

[@derrekmitchell1012]

u cant

[@amateursradio]

Very good explanation and visualization. Thank you

[@SweetLust21]

Thanks! I just saved myself $60 fee from optimum by watching this video.

[@pgreenx]

Im confused if you re supposed to remove the foil over the white plastic isolator part?

[@eduardobernardesdemelo5636]

Com o alicate de crimpagem é fácil! Valeuuu 🤗.

[@Triple88a]

You dont need a crimping tool, I used 2 pipe pliers and squeezed both sides of the compression fitting slowly until it was fully compressed. Came out perfect.

[@stanstanlison5791]

1:12 definitely spot on there 🤣

[@Reapio]

so does this also work for a router? because mines is kind of screwed and I feel like its helpless case.

[@tylerjohn5712]

How do I get them off? I got rid of cable and these things are in the wall and I can’t get them out because the metal part won’t unscrew

[@cayazigi]

Hi. On your tool which adapter did you use? 21mm, 20.3mm or 19.3mm. Could you explain the diferences between them ?

[@Teagan461]

Thanks for not using professional tools! Good video!

[@superpooper_2030]

This I use for RG59 to connect BNC connectors. Much easier

[@stangie2008]

Can we reuse the adapters after they've come off? Or do we have to get new ones?

[@2madrobot]

Those with compression is not usable again.Threaded can be used again

[@arrchee88]

Well what u did is entirely and absolutely practical way without special in the other side...but inserting the plastic blue collar with a special tool of one the good connector is much better...thanks for the upload

[@angeldavidthomasalgarin6494]

Hola còmo sé llama esa ultima herramienta

[@xbeanx3000]

With cable broadband could doing a bad job cause noise on the local network (neighbours connections)?

[@semco72057]

I like that video and have to try that out with the cable I have. Thanks so much for sharing this information with those of us who are new to this type of work.

[@omeshvishaal7141]

Thanks, I fixed the cable wire in one go

[@nandamiguel87]

Brasil 2019 curte aí...Pq eu não entendi o que esse cara disse kkk

[@littlecajun2241]

Great video. Thank you, now I’m off to Walmart since we don’t have Radio Shack anymore :-(

[@falooo7]

Hi mate , i have four bedroom house and decided to put tv in each room. do i have to wire a socket to each tv or is there is a wireless solution to this kind of house system ? thank you

[@007stuntman3]

Excellent video my friend, thank you, I leaned something...by the way, whatever camera you're using, WOW!..nice very nice..

[@cliffcarlo180]

Does anyone know how to get the damn things off again? Thanks

[@dhflannagan1]

nice,clear close-up filming. Good job,thanks

[@borntobearaider7677]

Thank you i just order cable and i have to connect it myself and the people the live in the studio before us cut the cable ends???? Wtf

[@MrDarren6868]

Hi can you tell me if l need to change my splitter that connects from areal to 4 rooms but for some reason only 1 room is working can it be the 8 con toon splitter

[@tonyferreira6679]

Many thanks for the vídeo and fantastic demo.Youre a professional ,thanks also being so Nice.

[@bornrevolution]

left to go trim my fingernails about 9 seconds into this

[@nsummy]

For all of the terrible comments on youtube, its ones like these that restore my faith in humanity haha

[@user-ns7vj4tz5h]

How can i connect this with TV... The wire is very thin ??

[@MoneyAhoy]

great video - shows that is easy enough to do yourself!

[@jasonmyjak5117]

Excellent video! Question I noticed you left foil on white plastic shielding? Some remove foil?

[@bewarethedecks]

The foil shielding that is affixed to the white insulation should not be removed. Personally, for me, purchasing tools designed for the preparation and termination of raw coaxial cable has been worth the money outlay. Otherwise, pre-terminated cables can be purchased from hardware stores, Best Buy and online vendors.

[@timematters800]

Thanks so much for this tutorial!. It may not be the most technical but it helped me greatly :))

[@Dennis4abril]

good video please let me know if theres e better video than this ? thanks