Hinderer Firetac Tri Way Folding Knife - Overview and Review

[@joe_a_photo]

Always loved the look. I love thin profile knives like the 940

[@johndice6837]

Me too that's why I've been afraid to stray away from my bugout or kershaw leek

[@ryanrediger1661]

Blows my mind that you can’t just look at it and differentiate if it’s a hex or a torx.

[@metal_complex]

Settle down folks, the master hardware identifier is here. We're all safe now.

[@ryanrediger1661]

@@metal_complex I mean 2 seconds with a decent set of eyes will do the trick. It’s kind of like mixing up a flathead and Phillips screw.

[@metal_complex]

**Bows with exaggerated gratitude** Please allow me to bask in your omnipotence

[@ryanrediger1661]

@@metal_complex those are pretty big words for someone who doesn’t know the difference between a Allen and a torx. 😂😂😂😂

[@metal_complex]

Shhhh... sleep now. Rest your weary mind. The burden of true wisdom is heavy... shhh....

[@jsampagaerice]

I wonder if you can use the same hex wrench from a CR sebenza 21? that wrench works with 3.5" XM's. it's what use for assembly/disassembly

[@Cdpittman89]

Man do I miss the pickle griptilian 😂😂😂

[@Keith_the_knife_freak]

Soon as they come out with different blade shape im in.

[@latigre7485]

Received mine a few days ago......the action on this knife is amazing in my opinion by far the best between all hinderer models. Definitely a long time keeper in my collection and i hope some titanium scales will apear some time soon.

[@RedneckInCarolina]

Just picked up one from SMKW. They have 3 more.

[@seaferg5072]

I was thinking about pulling the trigger on one of these, then they dropped a batch of the battle black bowies and I couldn't pass them up!

[@seaferg5072]

@@TeaDoubleE85 they were on blade hq and gone in 20 minutes... I just happened to check at the right time...

[@matsherwood6277]

I'm excited to watch this one!

[@Cry42]

Like the overall design, just waiting for a different blade shape. Wonder how a harpoon spanto/tanto would look on it.

[@Ber3ft]

are there ti scales for the thing

[@desertsmeagol7073]

A Hinderer with a thumb disc??? I never thought I would ever see that

[@jonathancaldentey4615]

Great video as always MC! Completely non consequential issue, but wouldn't it be easier to just use the bit itself to check the screw sizes? Seems like wasted time just inserting it in the bit driver.

[@metal_complex]

When its in the driver, I have control over it. I want that control so I don't slip and leave a mark on someone else's knife.

[@shaggy_e210]

I'm really interested if more blade shapes and a smaller version come out in the future.

[@mythicaldaytwo3365]

MC Listen here man you sucked me in to the hinderer. The first time I saw one on your channel I hated the look, how big and chunky it is but after going around and around in my head I’ve decided to stop all the hate and I got one... Now I got a fantastic deal on southern edges due to there reward system, 385$ for the 3 inch xm18. I was deciding between the zt0562 ti and making a full titanium xm18. I had the zt lined up with 15% off (shout out Slicey) but it was sold when I was ready. Long story short imma customize a hinderer to my preferences and I wanna send it for you to speak on if it looks good enough

[@USCavalry1]

It’s pretty tough to get a Hinderer these days.

[@Cry42]

Hex is 5/64 for anyone that needs it.

[@MrGtopper]

Can’t even find one of these on eBay .

[@willtrax71]

That’s a good looking Knife and yes a Hinderer is like my Les Baer, it’s hand fit and tuned perfection and you pay for that but that’s a good thing and you know you’ll have something that’ll last forever. I’m with you on the Philips heads though, “why” Lol.... great Video

[@HindererCollector41]

good video MC

[@jeremydutton1827]

The hardware is 5/64, the same size as a Chris Reeve Sebenza.

[@bomtradym4027]

i might get the zt 0640 instead cuz its cheaper

[@metal_complex]

Not a bad choice

[@gabebuchholz2679]

This is such a beautiful knife it's a shame I don't think I'll be able to ever afford one lol

[@radiocataclysm8368]

Ok I know this is straying from your usual, but could we see an edc pocket tool vid???

[@LUC.Knives]

I only went with the orange because at the time, that was when USA made blade got the first couple firetacs and i just grabbed the first one available lol. I would love to trade for a coyote tan/working finish one to match my XM-18

[@waltermoore2936]

Great review MC and btw i love the mickey mouse voice, makes me laugh every time.

[@youbesilly2k5]

In my opinion, it looks cheap for a $400+ knife (on the show side). The scales look cheap, like they r not g10. The blade doesn't look like anything amazing or good compared to other Hinderers. I feel like its not a great value for what it is. There r alot of better options cheaper then this or even other hinderers that r better.

[@BParker55]

I agree. The stock looks are underwhelming. They do look pretty damn good with micarta scales tho

[@youbesilly2k5]

@@BParker55 i saw the pic for the video, and thought "oh crap a hinderer with tri way pivot for like $250". Then I looked up the price and was like, "no way I'm paying $400+ for that, when I can get other hinderers for similar the price".

[@BParker55]

@@youbesilly2k5 I agree. It'd be hard to pass up buying another xm or an eklipse for the same $

[@RanjOnFire]

Lamnia has a few left.

[@BParker55]

I do wish he would stop pushing for those weird show scale pattern shapes lol I'd take one with his signature checkered G10 all day.

[@reggieringgoldjr68]

MC, you'd mentioned about them having different Scales and Whatnot. They have a Blackwashed one a DLT, but out of STOCK. CHECK IT OUT. 🤝🏾🇺🇲💪🏾

[@randyf.9188]

Nice, but over my budget 🤑

[@pkbaker100]

Am 100% keft handed and 100% would still just buy a right handed knife. I've never bought a left handed knife.