The legendary super slim FG knot tied with a self locking rizutto finish. One of the best ways to join leader to braid. This method is quite fast once mastered. Ensure both knots (FG and rizutto) are tensioned thoroughly.
Пікірлер: 163
@mikeybirdttl3 жыл бұрын
This has to be the best FG knot video which I have seen. Thank you.
@keithsr. Жыл бұрын
you need to research more then! This is the dumbest way I've ever seen!
@jamesrico697 Жыл бұрын
I have to agree. Been using multiple hitches to finish but this seems better and faster using just the rizzuto
@robertwong5026 Жыл бұрын
I have finally mastered the twisting and weaving with your wrist/pinky. It took a while but your method makes it so easy to tie the FG and it is way better than the traditional under/over method with tension. I added 1 half-hitch before the rizutto to lock the FG in. Thank you for such a great video.
@Le_person_au Жыл бұрын
Awesome to hear. Thx for your feedback
@redtobertshateshandles Жыл бұрын
I haven't. Lol
@mpasifik Жыл бұрын
Evet kesinlikle haklısın .++ (I added 1 half-hitch before the rizutto to lock the FG)
@iceman5117 Жыл бұрын
This method is really quick but looks like it wastes a lot more braid on the tag end. You also need really thick leader for it to hold out like that. The fg knot is also really good for light line for freshwater and ultralight applications. I have it tied with 6lb braid to 4lb mono on my trout/panfish rod right now, and the only way to tie it is with the pinky method, just because the line is so floppy and unmanageable
@iceman511711 ай бұрын
@baiseduezcke2295 if your drag is set correctly, your braid should never weakened unless it's visible frayed
@Peter-zg3em7 ай бұрын
i love this account. you are a hell of a fisherman. we're on the other side of the world and i've fished for 30 years and i'm picking stuff up from your vids. the internet is a beautiful thing.
@steev9272 жыл бұрын
Great explanation of finishing the FG with a rizzuto instead of a double half-hitch. If you tie a braid to fluorocarbon, this is a great video to watch.
@waynebusby6525 Жыл бұрын
Best video of how to tie the FG I have seen. Each step was clearly explained and the reasoning behind each step was great. My new 'go to' FG. Thanks heaps 👍
@Le_person_au Жыл бұрын
Awesome thx for the kind words
@robwooly6 жыл бұрын
Thanks, this is the right advice, once mastered this finishing rizutto knot leaves 1/2 hitches for dead ! , thanks for sharing.
@DevOpsNerd Жыл бұрын
10 months later still coming back to refresh on this knot. Great channel bro
@michaelbourquin1812 жыл бұрын
THANK YOU very much my friend. I've used this finishing knot now for like 3 years. When tied right, it's unmatched. I wish I could get his weave technique down, but I don't use 40# cable either. It's hard to do with 10#. The over/under method works though. 👌 Spot on mate
@Im118ish3 жыл бұрын
Excellent explanation...exactly what most tutorials are lacking
@redtobertshateshandles Жыл бұрын
Great fishing video. I'm trying to learn this knot. Super clear, precise and concise instructions. No b.s, love it.
@mbcustomlures7496 Жыл бұрын
Thanks for the love. I hope the knot serves well. I recommend you add a half hitch between the fg and rizutto
@racrx76 ай бұрын
Thx for the tutorial! I also don’t use half hitches as it adds bulk to a knot that is smooth. But on JB hollow core, I like to run the leader up into the hollow core around a meter, then whip the joint with light weight braid. Super smooth!! BTW, those are some sexy plugs behind you !😍
@christophervela54473 жыл бұрын
Holy crap lol Dang that is the fastest twist style of fg I've seen lol 👌
@willperryman45593 жыл бұрын
Great Knot, Great Lesson, and Demonstration ✊
@williamdampier52642 жыл бұрын
What sort of a sad sack would give a video like this the thumbs down? One of the best FG knot demos on you tume, IMHO.
@mbcustomlures74962 жыл бұрын
Love your comment. I guess you can’t please everyone.
@redtobertshateshandles Жыл бұрын
Sometimes I get bad recommendations. Give them a thumbs down so you don't see them again. It's KZbin. Give someone a like and you're bombarded with similar videos.
@jonnywaselectric6 жыл бұрын
When I melt the tag end I put a heap of spit on the end of the knot and it protects the braid and my fingers
@GeneFishingTV2 жыл бұрын
Awesome tutorial my friend 🙋♂🙋♂
@daveengstrom92503 жыл бұрын
This is the best/easiest one of these I have seen.
@mariusbanatanu43442 жыл бұрын
Thank you very much. for the wonderful, and powerful Node! 👍
@aer0nrubio3 жыл бұрын
Thank you for sharing. Im gonna try this.. Will be very useful on my fishing trips and vlogs. New subscriber here
@Le_person_au3 жыл бұрын
Cheers for the love. Put one half hitch between the FG and the rizutto. This is a good way to improve the knot some more.
@stanisa51189 ай бұрын
I’m adopting your technique Watched video many times Tensioning the line s at the end is NOT real clear Plz specify the sequence of Lines to be tensioned by TAG vs Main I ll be watching for more Tips. Thanks
@muratbozkurt89665 ай бұрын
Çok başarılı güzel anlatım çok teşekkür ederim 🇹🇷
@tyroneclarke16662 жыл бұрын
Well done mate. Thank you for sharing. Cheers 🦘🇦🇺
@thracian7866 жыл бұрын
Awesome knot. But try it with 0.13mm line and 0.26 fc.
@Joost7213 жыл бұрын
i know, with thin fc it is almost impossible
@tornagawn Жыл бұрын
Why tie with hollow braid? Why not thread down the braid core?
@antareslonghorn6943 Жыл бұрын
Henlo sir, nice knowledge for FG knot with Rizutto finish. May i know what type lighter do you use for that leader n PE? Where can i buy it? Regard Thanks
@Le_person_au Жыл бұрын
Google search bouz lighter. Buy two as they can be hard to find and unreliable but great when working.
@antareslonghorn6943 Жыл бұрын
@@Le_person_au thanks for fast response... Is Rizutto finish is enough or half hitch knot between FG n Rizutto? For fresh watwr casting sebarau and toman, only medium around 14lb
@deans66632 жыл бұрын
Great vid, where do I get one of those lighter’s can you send a link or description
@mbcustomlures74962 жыл бұрын
Google bouz lighter. They are great but tend to play up so buy two.
@CauseImFlawless Жыл бұрын
@@mbcustomlures7496 is there a gas refill you recommend?
@Le_person_au Жыл бұрын
@@CauseImFlawless it’s a bouz line cutter 2 google it. They are great but prone to failing so buy two if you can find them in stock.
@CauseImFlawless Жыл бұрын
@@Le_person_au no I know the lighter brand as he has named it but was wondering if there's a good gas refill that would be recommended
@808Mark8 жыл бұрын
Thanks so much for this video!
@hardtobelieve47534 жыл бұрын
great vid lee
@Mojomo7772 жыл бұрын
Thank you 🙏 👍
@allinski4 жыл бұрын
Why not 1 half hitch to hold fg knot from loosening before starting rissutto?
@matlaying49814 жыл бұрын
because its tie on the leader to make strengh force
@hntnnut2 жыл бұрын
I do one half hitch and have no issues.
@bendarbyjones172 Жыл бұрын
Why tie any knot if using hollow?
@sailfishjanani88543 жыл бұрын
Awesome method thanks
@lanlan95872 жыл бұрын
Thanks ...make things clearly.
@benprice37194 жыл бұрын
I can't get my head around why the second set of wrappings on the rizzuto works. Surely it would just unravel when you pull it. The first set is basically a uni knot, but the second is just wraps.
@ecksdog4 жыл бұрын
I’ve watched most FG videos on KZbin. Here’s my take, once the FG knot and 2 half hitches are done and you pull and tension the knot it’s basically done. All of the stuff tied after that like several more hitches or the rizzuto finish only help to keep the tag end from backing out.
@benprice37193 жыл бұрын
@@ecksdog I get that. It's just to lock off the fg and tidy up the tag end. But I don't think the second set of wraps on the rizzuto do anything. All you're doing is wrapping the loop around the main line, so it would just unwrap as you pull it through. It's really only the first 5 wraps that work like a uni knot to tie off the tag end.
@paulsubong3 жыл бұрын
@@benprice3719 When you do the second set of wraps, you are transferring the loops to the other side which make the knot streamlined.
@hntnnut2 жыл бұрын
The rizzuto is actually a version of a nail knot
@sailfishjanani88543 жыл бұрын
If you tension the finish too much first doesn’t it limit the tightening the FG?
@davidyang5773 жыл бұрын
If its not tightening your FG then you've done something wrong. Might be the rizutto, because that one does take abit of attention on this vid to get it right but once you get it its piss easy.
@mbcustomlures74962 жыл бұрын
No the tensioning of the braid slide through the rizutto no problems.
@leojoyalep2 жыл бұрын
I prefer finishing it with creamy lemon grass vinegrette more than risutto
@fredmeier35157 жыл бұрын
Please, did you make those line tensioners or can they be purchased?
@TonyGruber20097 жыл бұрын
Hi, You can easily use wooden dowels that can be purchased at a hardware type store. I have done this and cut them to the desired length and wrapped them with some tape for better grip.
@mbcustomlures74966 жыл бұрын
Www.mbcustomlures.com.au
@mbcustomlures74966 жыл бұрын
Www.mbcustomlures.com.au
@CauseImFlawless Жыл бұрын
@@mbcustomlures7496 link not working?
@boanerges1496 жыл бұрын
why the leader under the braid twist and become curly when I tighten the knot ???
@mbcustomlures74966 жыл бұрын
la paix ou l'épée a few reasons. Could be wraps on the fg aren’t close enough together as your wrapping the fg there should be no gap between the wraps. Also could be over tightening the knot. But it is normal to get some leader twist just not a lot.
@wadej3472 жыл бұрын
Looks bit messy prefer 2 half hitch cut leader burn it then uni knot or rizutto
@mrwhipper214 ай бұрын
It would be much easier to replicate what you are doing if you recorded from your eyesight point of view. I get the basics but hard to translate into action viewing from opposite point of view.
@chiautsai47602 жыл бұрын
If you could slow it right down... that would be awesome... Take 20mins on slo mo to show me how to do it. I just dont understand whats going where and why... But... i can see its goodness. cheers man
@jacked6247 жыл бұрын
Hi also have a question on the like tensioner where did u purchase
@mickharr6 жыл бұрын
thirtyfathoms.com/ not the same but they look really good. The ones' in the tackle shops are 40$
@mbcustomlures74966 жыл бұрын
www.mbcutomlures.com.au
@holajang4 жыл бұрын
@@mbcustomlures7496 You missed a spelling - s
@jefflemaster28502 жыл бұрын
Just when I thought the FG was impossible for me to tie- this version is even more impossible smh
@mbcustomlures74962 жыл бұрын
Just takes practice.
@fishinthet123mark36 ай бұрын
You can't use that technique with light braid and leader. A Slim Beauty in this case us so much better.
@Mojomo7772 жыл бұрын
👍
@antonioradulescu17243 жыл бұрын
👍👍👍
@บุญเลิศฟิสชิ่ง2 жыл бұрын
มาชมครับผม+1ครับ
@antonioradulescu17243 жыл бұрын
Make more videos
@นิสสันปุณณวิถี3 жыл бұрын
เทพ
@NytronX4 жыл бұрын
*Difficulty level:* Asian
@jason-ian-Van-Sloten3 жыл бұрын
What's that supposed to mean?
@NytronX3 жыл бұрын
@@jason-ian-Van-Sloten It's an ongoing meme. Anything you're good at, there's an Asian out there that's better than you at it.
@miamiwax55042 жыл бұрын
I cant figure this shit out 🤣
@horidahoriharrison1628 Жыл бұрын
Does this work with lighter lines? I tried with 20lb braid to a tapered shock leader (15 - 50lb) and find the leader very flimsy and hard to get the wraps around. Maybe I'm missing something?
@jenbilbrey10893 жыл бұрын
I tie the FG knot a total different way. Watching your video is definitely the way to go. You make it look so simple. Practice practice practice. I'm going to give this a shot thank you for sharing 💯
@Le_person_au3 жыл бұрын
Cheers for the love. Put one half hitch between the FG and the rizutto. This is a good way to improve the knot some more.
@mariusbanatanu43442 жыл бұрын
@@Le_person_au 🤔😮 I would be curious to see a video with the solution given by you. with that half hook. I think you're absolutely right. that helps the thread!
@GuizyGuizmo Жыл бұрын
@levihua1980 absolutely not, the half hitch WILL weaken the braid. That's the exact reason this HITCHLESS version is presented here.
@auslifeandy2 жыл бұрын
Awesome vid bro ! This has made it very simple and actually more simplistic for me. I tie them the same way but with slightly different methods and this has made it easier
@IsaacDS1232 жыл бұрын
i know where peligic persuit took this from now!
@alvinphua40938 ай бұрын
Very risky knot. When doing the finishing knot… the ‘entanglement’ is not always consistent for a secure knot. U may pull how hard with your hands the knot remains intact. When fishing after repeated casting, the knot may unravel- your leader and lure will slip away… i rather stay with the conventional finishing for fg knot- more secure
@Le_person_au8 ай бұрын
This is true.
@MidniteClubII27 күн бұрын
Excellent tutorial, well presnted. Thanks much.
@Le_person_au27 күн бұрын
Just for insurance add 1 half after the fg
@wuquanchi3 жыл бұрын
its been 5 years and I just watched the video :) thanks friend!
@clifflee54047 жыл бұрын
I just realized what MB stood for ROFL. I hope the name was deliberate.
@jaypible56406 жыл бұрын
at first i was like "what could be so funny, and why wouldnt you share?".. then i got it LOLLL
@mbcustomlures74966 жыл бұрын
Master baits was the old name. 😁
@UdaykumarPR2 жыл бұрын
FG (FineGrip) version 2 👍🏻✅
@lmsmbassaddict77794 жыл бұрын
When I'm trying to tie a thin knot I finish the wraps, half hitch, tighten, 6 loop lock knot, cut your leader material an 8th of an inch and heat it up right after roll your fingers in the hot leader. It don't hurt too bad you get used to it. You want the tag end to melt into the top of the knot but be very careful. I pinch and use my nails as a heat shield. Then cut the braid and do the same with that making sure you just get that to a ball point. I've tried every single way and for me this knot is as much about strength as it is about being thin and this is the way to get that really really thin knot that only barely brushes the top guide. I've strength tested it and if done right between this and the rizzuto The line breaks in the middle. I'm not downing the rizzuto finish I just think this way is so much better.
@Le_person_au3 жыл бұрын
I agree I like one half hitch after fg too.
@koogle612Ай бұрын
I accidentally omitted the half hitches when practicing this knot and found the entire knot not only did NOT lengthen when tensioned. After tensioning, the knot simply could not be moved at either end in either direction without any glue & the crossovers all had darkened and visibly compressed the 80 lb mono I wrapped with the 60 lb suffix. The rizutto did what 5 or 6 half hitches couldnt, it locked the knot completely & permanently. Happy mistake. completely.
@raidazz1 Жыл бұрын
Brilliant! You've helped make tying this knot easier Thank you
@trg3761 Жыл бұрын
Looks simple but highly frustrating to do when trying to execute it.
@DevOpsNerd Жыл бұрын
Sweet alternative to standard wrapping!
@theastuteangler Жыл бұрын
Gimme dat Rizzuto finish daddy
@nezzak93783 жыл бұрын
Excellent explanation and clear video. Straight to the point of how to do this knot. Thank you.👍
@limemmohamed85299 күн бұрын
Best and easiest way to tie the FG! Great Man thnx)))
@MrOmarkiam2 ай бұрын
Thank you for clear and concise video! Aloha!
@3runjoshАй бұрын
this is the best. I was almost buying the FG tool.
@ryukyudiver13 жыл бұрын
Dude, you got that FG twist down pat! Look like your fingers were on a gymnastics pommel horse.
@mbcustomlures74962 жыл бұрын
Best comment I’ve read in ages
@scottnagel2554 Жыл бұрын
what lighter is that?
@maitrifischer2681 Жыл бұрын
I use the same knot, its epic, never failed me.
@Le_person_au Жыл бұрын
Music to my ears.
@deanbeljanski13702 жыл бұрын
I have issue with rizzuto finish, usually rizzuto breaks during apllying tension to finish fg knot, braid is Shimano Kairiki 20lb with fluo Sunline 35lb!?!?
@schalkvandermerwe4855 Жыл бұрын
I do the same for my FGs but after about 30-50 casts through the guides the risuto always seems to give way and starts coming undone, have lost some lures to this 🤦🏽♂️ any tips info on how to prevent this? Thanks
@Le_person_au Жыл бұрын
Try adding more turns the the rizutto and tying it with minimal slack line and tension 70% as tight as you tension the actual FG. Let me know how you go
@tornagawn Жыл бұрын
Knot sense?
@bido81762 жыл бұрын
Most people do the half hitches then rizzuto. But it seems the rizzuto is enough from your demonstration. Also be careful with the line tensioners. You don’t want to wrap the line over itself on the tensioners. It will dig into itself. It needs to wrap around the tensioners without overlapping itself.
@Psevdokranos3 жыл бұрын
I like the way you show it, but my fingers...they'd go like a spagheti nightmare...before i managed to carry out the task.
@stanisa511810 ай бұрын
Thank you!! This is sooo much better than “animated knots”. I’ll be following this
@davidyoshida16932 жыл бұрын
Is that a special lighter for burning fishing line?
@gurkanbaser35282 жыл бұрын
Perfect and simple ending... :))
@vinniebarbarino-12 жыл бұрын
Thanks well explained and ill give it a go "liked" , cheers
@andrewmorke2 жыл бұрын
You are most dexterous. Good video.
@marck7270 Жыл бұрын
ty, superbe explanation
@befmx313 жыл бұрын
Very slick method for wrapping the FG.
@Snaproll475182 жыл бұрын
An excellent way to tie a FG..
@patrickcody83442 жыл бұрын
Fantastic video, clear and concise! The links below for the "line tensioners" aren't working. Please describe what you're using and/or how to make these tensioners. Thanks!
@Vermonstered2 жыл бұрын
Any cylindrical object with a grippy finish you can get a good grasp on. Could literally be cut dowel pieces wrapped in electrical tape if you want to make something. I just end up using whatever tool with a grip pad that's laying around. Hammer, pliers, whatever.
@holajang4 жыл бұрын
You missed a spell in every reply. s
@markadams69342 жыл бұрын
I'm looking for a lighter to use at the beach for rounding off the tag ends. Is that a piezoelectric lighter you are using, or just a regular butane lighter?
@mbcustomlures74962 жыл бұрын
Regular butane. Any jet lighter is great in the wind. The electronic lighters are effected by wind 😓
@cottonrbxx7 жыл бұрын
Wow super smarter way to tie it
@manuelbernache13652 жыл бұрын
👍👌
@jack_attack_15 жыл бұрын
Were you on ninja warrior?
@koetomo4 жыл бұрын
Very clear
@ezmover3464 жыл бұрын
A butane lighter when the wind is blowing at 20 mph? Really?
@NytronX4 жыл бұрын
Berkley TEC hot line cutter. Get one.
@christophervela54473 жыл бұрын
Why wouldn't you just splice?
@sailfishjanani88543 жыл бұрын
Do you mean use a Chinese finger trap into the hollow core? If so in my experience JB hollow braid will splice up to its own breaking strain but anything thicker tends to be too big to thread.
@TheBrand833 жыл бұрын
Can you do this with the PR?
@Le_person_au3 жыл бұрын
Yep.
@jimmyceltic41207 жыл бұрын
How can we get your lures
@mbcustomlures74966 жыл бұрын
Jimmy Celtic www.mbcutomlures.com.au
@holajang4 жыл бұрын
@@mbcustomlures7496 You missed a spell in every reply.
@huss2bassin2 жыл бұрын
This is so amazing thank you
@boardernr5 жыл бұрын
What kind of breaking strengths are you seeing w/ this style of FG knot? thanks
@mbcustomlures74965 жыл бұрын
About 70-80% of the braid
@keithsr. Жыл бұрын
I can tie the fg knot much easier than this in 2 min or less . In the dark, wind, on a boat or ice fishing!
@5spottedbass6 ай бұрын
Then go tie it and move on
@keithsr.6 ай бұрын
@5spottedbass stop posting stupid much more difficult ways to tie a simple knot . This is a bozo the clown way of doing it. Anyone that followers your instructions will probably lose a good fish! After watching again, yup just as stupid!