100 Working!! How to solve decoder upgrade issue on Gotv

[@christophermatemba2241]

❤❤❤❤❤ this is perfect 🎉 I've done it and I've updated my decoder

[@kilianmwadime563]

Thanks. I watched your video and followed the steos and finally it worked. Thanks

[@hitvibz]

Glad it helped

[@LATEEFFTATAI]

Good morning ,can u quickly help me on my decider some channels is not showing at all especially African magic yoruba

[@dralexbetim]

Mine the decoder is showing the red light but it's not showing any signal on tv. I suspect the decoder sensor, can I use this pattern ?

[@esmaelsualehe1158]

Muito obrigado, ajudou bastante.. fiquei dois dias sem ver TV por conta deste problema. Deus abençoe

[@chukwumaclive3550]

Code does not show.....i guess a recent update for 2024 is needed... Thanks

[@oamenvera-z8l]

Can I press the p- and p+ on my remote?? Because my decoder buttons have been deactivated

[@bethelchikezie7547]

Must I have my subscription running to enable me do this?

[@onyinyemilicentotuu8235]

My problem is when it get to 22sec toward the final stage, the decoder will off by it self and start showing upgrade decoder

[@yoongi-hg6sr]

Thanks so much, mine actually worked now

[@hitvibz]

Glad we could help

[@opikidi]

my decorder is showing front end error failed then exiting itself

[@adewalesunday5910]

how were you able to solve this please

[@opikidi]

​​​@@adewalesunday5910 I used the temporary solution. First, unplug the power cable then unplug the signal cable. Plug back the power cable and wait until it loads the channels and when signal is now required then plug in the signal cable. It's temporary and therefore you will have to do it everytime you switch off your Tv from power source.... also the issue is caused by poor network otherwise the procedure in the video works.

[@funmilayoeunice8902]

Tanx Soo much for dis, I did my own now❤

[@blessingchinonso-hx9di]

Thank you guy it works

[@EustaceHilary]

During the download part it is writing "Front end-lock failed"

[@hellenanansubuga3254]

Thank you it worked

[@XavidaplutonioPlutonio]

Thanks o meu problema esta resolvido From Mozambique 🇲🇿

[@AjaliMiracle]

Mine is not showing the three zeros when I press down the p+ sign

[@Ohenhen-Kathryn1]

Thank you so much, this really helped me 😊and mine is working now

[@hitvibz]

Glad it helped!

[@terlumunjoshua8926]

I followed everything as told but instead it's load fast ND go back boot up...then go back to how it's was

[@DamilolaFavour-hx7qm]

Thanks a lot totally worked. Awesome

[@hitvibz]

You're welcome!

[@KemiShalom]

After all the doings my decorda still go bafk ti load again

[@Peggy-g1m]

Thank you very much for your help I really appreciate I also did it, it started showing in just a few seconds😢😢😮

[@fhavouryoung763]

Do I have to do this every time I want to watch my gotv?

[@hitvibz]

If it continues, I will advise you upgrade to another gotv plan. It will stop

[@sandroamisse8939]

thanks, the video helped to much

[@OdugboAjonah]

Dope

[@Flourishjohn_mara]

God bless you bro❤

[@elfrdaboma4023]

I just subscribe 3 days ago it’s not showing when it finally shows big brother channels is not showing it’s telling me invalid channel

[@AdenugaAderonke-pq6cu]

Me too 😢

[@TemmyTitilayo]

Wao…so cool thanks much for the info

[@hitvibz]

Any time!

[@g.harmonyinvestmentscc841]

Very helpful thnx!

[@hitvibz]

You are welcome

[@yemisi_margghy90]

You're the best ❤❤ very helpful

[@ElizabethUgoma]

God bless you

[@iconic_bruno9923]

It worked thanks brother

[@anapaularazao9267]

Thanks 🙏

[@KhayaneJoaquim]

Thank you so much

[@hitvibz]

You're most welcome

[@smith-mb9lz]

Mine is not working it has even gone over 10mins please help

[@hitvibz]

If it goes over 2 minutes, simply restart the gotv and don't touch it. It will pick up by it self and start to display. If it doesn't, try the steps all over again. If your gotv shows the upgrade issue each time you power it on, then try to change your subscription to another one. That also helps to fix the issue permanently Good luck.

[@smith-mb9lz]

@@hitvibz thanks I'll try

[@pizzle10]

​@@hitvibzplease how do I change my subscription?

[@UdokaEgwu]

Thank you very much 🎉👍💓💓🥳😍😁

[@Hiqmah-f4f]

Thank you❤

[@oluwatobiomotayo9361]

Does it require an Internet connection, please?

[@AmosJohn-o4y]

Worked ✅

[@TessybamsVictory]

Thanks so much dis was very help to me

[@VictorYetunde-do2gu]

Thank you very much sir ❤

[@ekenenezianya593]

I did it and after watching for few minutes it told me it will be maintained in few seconds after that it continued the upgrade again

[@hitvibz]

I'll suggest you repeat same procedure. If it continues, you have to call the customer care then.... Sorry for the late reply

[@tamandabanda9813]

Same to my decoder

[@OjoKofoworola-r5i]

Thanks

[@NwokikeUchenna]

How far Go tv

[@SharonJebet-n9e]

Why mine is not taking 22 mins

[@saidomar2409]

mine says it found an error and stoped

[@ZainabHarbisolah]

Mine is still not working

[@mhizgold8291]

I have tired mine more than 10 time and it is not working it is say front end failed

[@humblesmart951]

Same here

[@raymondtheversatile3368]

You only bypass the update. No solution proffered

[@fritzmayer2599]

I’ve tried this more than 10 times and it’s still not working

[@DMG__]

Same here

[@JoyOnyegbula-e7k]

You are awesome🎉🎉

[@florencenamujjuzi1199]

Thank u❤

[@hitvibz]

You're welcome 😊

[@obanijesurealenoch8841]

Thanks so much bro you are the best

[@JoseLuisLisboa-pq8kt]

I did and it worked but the next day he did the same.

[@teresamukhobi5942]

Wow😂😂,it was quite helpful

[@hitvibz]

Glad to hear that

[@OpeyemiIbrahim-p3g]

I love it work

[@DMG__]

I did it it doesn't download it will go back to the same deocoder is running old software

[@hitvibz]

Take it to their office for upgrade then

[@NdubuisiChinenye-r3r]

D code is not showing

[@adulojuoluwakemi788]

Rewatch the tutorial again

[@bamgbolaayomide9108]

Thanks bro

[@hitvibz]

You're welcome

[@LionJane]

Thanks gee❤

[@JessicaJude-o8u]

Electric shock mi

[@jamesthomas5150]

I think it works for me sir

[@asoluka4256]

Mine didn't work

[@hitvibz]

Try again, carefully this time and if still didn't work, take it to their office

[@BodeSunday-sy2yr]

The code must be 0001 or dere is other code to use

[@hitvibz]

Unfortunately, no other code to use

[@AmotoBasit]

Code is not showing o

[@InesAmade]

You must press when ti starting processo imidiatly

[@fiabemaibifuro2121]

Mine is still showing decoder upgrade

[@KhayaneJoaquim]

Thank you so much

[@hitvibz]

You're most welcome