HK Army Etha 3M Rapid Fire Valve Upgrade - Review

[@keypawn3024]

Sounds like a game changer, but without electronic eyes, won't it start breaking paint when the hopper slows?

[@Aves_1]

There are some companies like mcs that sell a solution, al least for the emf100, that stop the bolt from firing until a ball is fully seated. I think one of those would be a good peace of mind to have in the gun

[@migmag_9789]

True. At least with my Rotor or the average Spire, I don't suspect you'll even notice an issue though. Only time eyes ever seemed useful at 10.2 bps is when my hopper was off!

[@samuelviera3758]

Will the full auto feature also work if u walk the trigger (use two fingers on the trigger? As u would a electric gun to get them to ramp

[@keypawn3024]

Mechs have a single-finger trigger. There isn't room to walk it unless you have baby hands.

[@iHasCaek]

@@keypawn3024 liquid paintball sells a trigger shoe that has little wings that help make it easier to walk single trigger mechs. needs some getting used to, but very doable.

[@Marcelis]

@@keypawn3024don’t forget about the double trigger kit, though if I had that I wouldn’t bother grabbing this upgrade

[@TheBroz]

You have to hold down the trigger for full auto. Pay attention.

[@lattylat381]

does the notch face in or face out installing?

[@Marty_McFatty]

I don’t recommend this valve for the EMF. I upgraded to this valve and it has been double feeding my paint. Not sure if it’s because of my loader. I checked my ball detents and they were good. The only way I found to appropriately use this is to hold the trigger down, but it’s still inconsistent at times. I will be going back to the stock valve.

[@justinbryant6676]

New studio looks really good man.

[@nsoutlawball1941]

Will we see one for the 180r?

[@maxxon99]

Hmmm.... will this actually be legal in mech tournaments?

[@reignick1133]

Ha! Oh heck no this is tournament illegal for the vast majority of mech tournaments .

[@samuelviera3758]

Oh OK makes sense

[@malcomcarrier4348]

You just need to cut oring and It will do the same

[@el_panda4873]

What o ring?

[@parzival7071]

just cut one O-ring, same effect

[@el_panda4873]

What O ring?

[@TheBroz]

I think it’s really irresponsible when you show these guides and you don’t show lubricating parts. Plenty of idiots take the pictures as gospel and don’t listen and don’t lubricate their markers properly.

[@joshgross8741]

Yea i want him to bust out the lube every video PPC.