HMS Beagle - part 18 Making The Stern

In this video i make the stern. I place a lot of pieces and in some parts it's kind of difficult. This Video comes in 1080p.
Check out my personal recommendations from Modelers Central :
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Advanced
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Expert
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Tools
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf

[@michaelryan6884]

Nice job, John...and a good example of persistence to get something right. She's looking good!

[@JohnsWoodenShips]

Thank you very much for your kind words Michael!!!

[@keranpower6805]

Once again, very helpful. I have slipped behind you, so I need to put in more time to catch up but I must stop myself from going too fast because that is when I make mistakes .

[@JohnsWoodenShips]

You have to make mistakes so you will learn :) But it is fun to build this one together :)

[@simoncrowther9415]

Hi John. My model of the Beagle has arrived and I look forward to watching your passionate and informative episodes. Although I have made smaller ships before, all tips and knowledge will always be helpful. Thanks.

[@JohnsWoodenShips]

Hi Simon! You will enjoy this one, even though i prefer the big ones, the Beagle is a master piece :)

[@chrisbarber5842]

Your videos are very useful I am learning a lot from the master

[@JohnsWoodenShips]

Thank you very much Chris for your kind words!!!

[@buckchoppers2480]

Very nice, John. Bending the decorative wire for the transom was tricky for me being my first time. Your experience really shows here. Great work!

[@JohnsWoodenShips]

Thank you very much Buck for your kind words!!!

[@moikehunt8928]

Another great lesson John, thank you for sharing.

[@JohnsWoodenShips]

Glad you enjoyed it Moike!!!

[@paddyohare1223]

Great job John! I didn’t know that you could bend a large piece like the stern and make it fit so well. Enjoyed seeing you work on the metal pieces and how you bent them into shape.

[@JohnsWoodenShips]

Thank you very much Paddy!!! I am glad that you like my work :)

[@AbstractArmorHLF]

Love the build. Looking great...

[@JohnsWoodenShips]

I am glad that you like it Henri!!!

[@robertsalanon2909]

Hello John !! great work....bravo

[@JohnsWoodenShips]

Thank you very much Robert!!!

[@GregWilson635]

You were not kidding about bending the strips around the stern being tricky. I think I broke about 4 planks before I managed it :)

[@JohnsWoodenShips]

It was hard, even with soft type of wood :)

[@Georgeolddrones]

Thanks for the video John thanks looking lovely 😂🐕🐕

[@JohnsWoodenShips]

Glad you enjoyed it George!!!

[@markhodge7]

I've heard you mention that when you choose or decline to build a specific model, the design and esthetics of the stern particularly contributes to the decision. Not knowing if this particular stern is more or less difficult to build than others you have built, it still looks very tricky to get a pleasing look. The phrase, "Be careful what you ask for" comes to mind. :) However, getting it right must be very satisfying. Looks good.

[@JohnsWoodenShips]

You are correct Mark. This is a beautiful model but the stern in not my type, but this model i ma building it for a friend, so it's not mine :) The stern is tricky in some points.

[@zjiep111111]

John, are you ok? The fires in greece are terrifying. Take care!

[@JohnsWoodenShips]

Thank you very much Peter for your concern :) I am fine although the atmosphere is "heavy" with all that smoke and ashes. I am living just 12 km (8 miles) away from the fire.

[@jeanlignereux275]

Hihihi John😍🤣I love your friend Wolf who is doing all the hard work...he has all curves in his brain thanks to his ball...🤣😂😁have a nice day !!

[@JohnsWoodenShips]

Thank you very much Jean! Just to let you know, Wolf has passed on the 9th of June.

[@jeanlignereux275]

@@JohnsWoodenShips I knew it my friend,but anyway he was a super dog!😍

[@JohnsWoodenShips]

@@jeanlignereux275 He was and i miss him a lot...

[@peterbuffel351]

The stern looks very nice. I can tell you it is difficult to get the wires in straight lines and matching the left and right. Nothing is easy for a first time builder, but I manage to make it. planking the inside of the stern is not mentioned in the schematics I did it and it gives a good finishing result.

[@JohnsWoodenShips]

Yes i agree, it is very difficult to match the wires! The inside of the stern is painted black, but if you planked it it would be better as plain wood :)

[@genojoe3176]

The same three dislikes, it really is a shame...I love your work and look forward to your new videos.

[@JohnsWoodenShips]

Thank you very much Joe!!!

[@kyttapo]

Once again you earn thε bet with the stern (rhyme)

[@JohnsWoodenShips]

Thank you my friend!!!

[@GeneSmithGolf]

Hi John, I am coming up to this part in my build and I have a question. Do you like the blue paint used in the officer's quarters? I'm not sure it is very realistic....yet I do not have a color in mind as an alternative. Did you like the blue paint on the windows?

[@JohnsWoodenShips]

Yes i did like it, makes the windows to be recognizable , you can use silver paint as well.

[@willwilco]

Hey John, I have a question regarding a ship build I have. I have a couple of pictures and was hoping if you saw them you could maybe give me some advice on how to fix my mistakes. Is there a way I can contact you with these pics?

[@JohnsWoodenShips]

Yes Jeff, if you have fb find me there, if you don't send me an email [e-mail]

[@willwilco]

@@JohnsWoodenShips Thanks John, I will send the pictures to see if you have any ideas. AS for FB, I closed my account 6 months ago.