Hollowtech 2 Ebike PAS sensor problem (not fixed)

About :
Shimano Hollowtech 2 crankset
& fitting Ebike PAS sensor for Hollowtech 2 (in this case Yose Power ebike kit).
Bought the Yose Power ebike kit PAS sensor magnetic disc they sell for Hollowtech 2 cranksets, but it doesn't fit.
Basically the magnetic disc only fits chainrings with 22 teeth ? (maybe 24 ... dunno).
There's very little info on the internet (almost none).
This is not a fix video !!
In this case it was to fit a Yose Power ebike kit.
The kit itself is good quality but if you have a Hollowtech 2 crankset there could be a major obstacle.
The PAS sensor shown is the 1 Yose Power sell for Hollowtech 2 cranksets. (price : £14 - £28).
If buying the Yose Power ebike kit you need to buy this PAS sensor separately (1 with kit won't fit any Hollowtech 2).
Seems to be no answer atm except heavy duty modification (or buy a new crankset ?).
PAS = pedal assist sensor.

[@HareReviews]

I think its designed for chainrings with bolts that are 64mm apart via the middle (usually 22 tooth chainrings ?). My chainring bolts are 110mm apart via the middle. Its designed for 4 bolt studs ? (unless you don't need the casing ?) bolt distance through the center is known as PITCH CIRCLE DIAMETER ? ??

[@henricus-aalbers]

Glue them on the bracket

[@HareReviews]

that sounds a solution. but most front ring BCDs are too big. nothing to glue to on the rings.