Holosun SCS VP9 Install on a HK VP9SK:

[@itsMBWAAA]

What a coincidence lol. I’m trying to put my SCS on my vp9-sk and the SCS supplied screws are acting like they are a different thread pitch or something. Didn’t think I’d need a video on how to put this damn thing on but here we are, so thanks!

[@MightyGunzTV]

Very glad this helped you! I was afraid to force it in but I’m glad it’s just a snug fit. I know you’re loving your sk! 😁

[@mattshaw3225]

I had the same problem. The right screw was fine. The left side I could not get that MF to go in properly or seat flush. After many attempts I finally got it. But now I’m reading that these provided screens are snapping off when firing the weapon. Now I’m scared to even take a chance of shooting it and this happening

[@magdumpmonday]

Very nice. I have just did a series on my vp9 tactical. Very nice looking gun

[@MightyGunzTV]

Thank you! They are awesome guns!

[@stevesguns]

Just got my VP9 match today . holosun arriving tomorrow

[@MightyGunzTV]

@@stevesguns awesome! Congrats!

[@mobilegamersunite]

How did that work out for you?

[@stevesguns]

@@mobilegamersuniteamazing I love it

[@robertlee5214]

I just googled it "This may come as a surprise but, technically, yes. Solar panels can charge with other forms of visible light besides sunlight. Artificial lights such as incandescent fluorescent bulbs can be used to charge solar cells, provided the light is strong enough."

[@MightyGunzTV]

You are correct!

[@naomiijasmiine]

this is lovely information to know. thank you ❤

[@ClaynZaycaz]

My hk vp9 is the best feeling gun. It feels like it melted in my hand lol

[@MightyGunzTV]

Damn right it is! One of the best ergonomics of all time imo.

[@Civilian_Patriot]

HK everyday, I have a VP9 tactical suppressed with this optic with the Slideworks slide. It’s my dream gun. Sits next to my MP5. I’m waiting on them to drop a micro 9 as the VP9SK feels a little too chunky for what it is, p365 is still king in that regard.

[@MightyGunzTV]

I would love to see a micro! HK holds a special place in my heart for sure. But I think the new metal carry comp will be the best gun of the year. Absolutely amazing piece! Now you got me looking slideworks 😂

[@Civilian_Patriot]

@@MightyGunzTV too bad I can’t upload pics to KZbin

[@MightyGunzTV]

@@Civilian_Patriot you can post a photo. It will go to your community page!

[@Mako-sz4qr]

Are you gonna just keep the SCS on all the time? I have heard that there’s really no need to shut off since it’s always charging. So no need in shake awake I guess. I’m alittle scared to use the Holosun screws because there are reports of them breaking even after the recommend 15 ftlbs torque spec. I was recommended to use the screws Battlewerx so I ordered them. They came in yesterday so I’ll be mounting my SCS on my G45 mans it’s gonna be sweet !

[@MightyGunzTV]

Nice brother! Yes I keep mine on at all times unless when it’s going in the safe. Probably the blue stuff that’s not the screw created too much tension for those other people. The screws were a little tight to install, had to put some force but they are in at 15lbs!

[@Ou81gi812]

@@MightyGunzTV Question: If the screws felt a little “tight” when you installed them, do you think they could have been cross-threaded? Could the “pitch” of the Holosun threads be different? Since these little machine screws are so fine, did it feel like you could be “cutting new threads?” I’m a little apprehensive to mount my SCS onto my Long Slide in fear of boogering-up the holes tapped into the VP9…after all, if those holes get stripped out, the only remedy is to drill oversized holes, tap them, then drill oversized holes into the SCS!!! Maybe I’m over thinking this…I just don’t want to open a new can of worms. (Thanks for your post.)

[@kbone831]

I just purchased this sight. Where can I get a 15 inch/lb torque wrench that works on the star key screws?

[@MightyGunzTV]

What I recommend and own and use almost every time I do work to my guns, FixItSticks. amzn.to/3UJ1Hoy. Using that link will help support the channel and the fam! Thanks for watching and make sure to add some blue loctite.

[@derrickjohnson2663]

Thank you for this!

[@MightyGunzTV]

Thanks for watching!

[@SG-gb6sq]

Thanks for the tips. Great video!

[@MightyGunzTV]

Thank you!

[@frederickwilliams5288]

Great video Bro 👍🏾👍🏾👍🏾

[@MightyGunzTV]

Thank you bro!

[@nickr3589]

The tan part of the grip is that the gun or a stick in grip tape I like it

[@MightyGunzTV]

The tan is a talon grip wrap. I appreciate ya!

[@nickr3589]

@@MightyGunzTVthanks for the reply where did you get it from. I can’t find one that has the opening in the middle.

[@MightyGunzTV]

@@nickr3589 bro I had to cut that wrap myself. Here’s the link talongungrips.com/other-grips/diy-material/diy-5-x-7-material-sheets/

[@nickr3589]

@@MightyGunzTV that’s why I like it so much looks great might copy your look.

[@MightyGunzTV]

@@nickr3589 Go for it brother! Buy 2 sheets in case you mess one up, and thank you!

[@elilyakhovich804]

Sorry to ask, but I have a VP9 Full Size and the screws that came with the Holosun SCS are too small for the holes on the gun after I take off the plate. Any suggestions? Thanks

[@MightyGunzTV]

Did you get the scs vp9? And they are too small like they fall right in??

[@elilyakhovich804]

@@MightyGunzTV Yes I got the SCS VP9. And yes the screws are smaller than the hole. They dont even screw in. Did you have the same issue?

[@MightyGunzTV]

@@elilyakhovich804 mine were tight and I had to give them a good push while screwing in. But I used the holosun screws. Use blue Loctite

[@josephtucciarone6878]

Correction. Ambient light charges it up. No need to see the sun.

[@MightyGunzTV]

You’re killing the joke bro! 😎

[@volodymyrbuchak1852]

Let me ask,are the stock irons still relevant with it,or you need a silencer hight ones. Thanks.

[@RaiseHellPraiseDale.]

With the Holosun SCS models, stock height iron sights will co-witness your optic since you don't have the lift of an optic plate.

[@volodymyrbuchak1852]

@@RaiseHellPraiseDale.Thanks. Will order one soon.

[@MightyGunzTV]

@@volodymyrbuchak1852sorry for the late reply! As already answered, yes the scs sits flush without a plate so you get a co witness. I’ll post a video for you tonight.

[@22Mubu]

What holster can you use for this I have this same gun model & optic

[@nuke_em_007]

Do you have to remove the sight to change battery also is there no shake on do you have to turn it on and off ?

[@MightyGunzTV]

The battery is completely internal and is solely charged by light. 20,000 hours on a single charge, so I'll just leave it on.

[@matthewbeaver5026]

I just order a replacemet OR slide. It comes with the tall sights. Will the high sights be to tall to use with this optic direct mounted?

[@MightyGunzTV]

Yeah, hopefully it won’t get in the way! How did it come out?

[@matthewbeaver5026]

@@MightyGunzTV those suppressor height sights are so tall I went a diff direction. Initially I thought I'd just swap my sights off my non OR slide. But the rear sight was changed to accommodate the cut. I wasn't entirely sold on complete solar anyway. Got a steal on a cyelee and thus far I'm happy with it.

[@MightyGunzTV]

@@matthewbeaver5026 Nice! Which one did you get?

[@matthewbeaver5026]

@@MightyGunzTV wolf x pro

[@SansomeGeeks]

Did you have to replace the iron sights as well or is that stock?

[@MightyGunzTV]

Stock sights!

[@brianterlecki7106]

How many rounds have you put through it while using the scs? Has it came loose at all?

[@MightyGunzTV]

Probably close to 400 rounds or so with the SCS. No issues. Even though it comes with the blue strip on the screw I would still put a small drop of loctite or vibratite

[@mobilegamersunite]

Im getting one for my match pistol

[@MightyGunzTV]

You will enjoy it. The window is a little small though so just make sure you look through one first.

[@mobilegamersunite]

@MightyGunzTV its the only way to co witness...i don't have much of a choice. Irons are always faster to find than any dot.

[@nineninesixteensixteen2386]

What tan grip is that? Is it talon ?

[@MightyGunzTV]

Yeah Talon, I removed it though. Going to get the pro grip that’s precut from them.

[@polos5636]

Do you know what optic plate I should use to hkvp9 but for optic HS SCS 320?

[@MightyGunzTV]

I don't think there is one but I may be wrong.

[@wreckinball11]

So the Holosun optic clears a suppressor without a lift? I am waiting for my suppressor from the communist ATF but am buying the VP9 and need to set up for the Dead air Primal.

[@MightyGunzTV]

Hmmm that’s actually a very good question… I’m not sure but I’ll see if I can get a video of the view for you. Nice suppressor!!

[@wreckinball11]

@@MightyGunzTV awesome. I thought I heard you say you were getting a threaded barrel. Are you getting a suppressor?

[@jn3750]

no HK plate needed?

[@MightyGunzTV]

Nope! Fits like a latex glove.

[@jn3750]

daytime bright engouh? @@MightyGunzTV

[@bustahmove123]

What kind of sights you running?

[@MightyGunzTV]

Switched the sights from my VP9 that were night sights.

[@920WASHBURN]

My carry gun will never see the light of day

[@MightyGunzTV]

You only train at night??

[@920WASHBURN]

@@MightyGunzTV no I'm Michigan. No outdoor ranges anywhere near me

[@920WASHBURN]

@@SigmaS3v3n oh, well that makes life easier. Nice

[@SemperFi748]

Does it work at night?

[@MightyGunzTV]

The SCS, yes it does. 💯

[@mattshaw3225]

Have you had any issues with the screws they provide? I had trouble on the left side. The screw did not wanna seat properly and now I’m hearing that the provided screws are snapping on people after just a few fires.

[@MightyGunzTV]

No issues yet, but I will say to begin threading them they were incredibly tight, had to give it a good push & turn. Maybe take the screw out, spray the hole with some compressed air and use a bristle brush to clean the screw.

[@PatriotArms90]

Haha the ending 😂

[@MightyGunzTV]

Aaaaah 😂

[@Rustypan471]

I would have removed the slide so no chance getting threadlocker where you don’t want it. I would have cleaned the slide with alcohol too, but I’m anal about my guns😊

[@MightyGunzTV]

I def should've removed the slide as per instructions but I like to keep my slide oiled.

[@kellz8854]

Bro got green on green. That’ll mess me up

[@MightyGunzTV]

Just gotta know what you’re looking at!

[@Dom_721]

So this fits on the regular VP9 also?

[@MightyGunzTV]

Yes it does! Like a glove!

[@nje500]

Same model fits VP9 full size, but it does have to be the Optic Ready version. The SCS VP9 model is made to fit the slide without needing a plate, but does need the milling to mount a site.