request to modify the circuit to include Eprom and also timer to schedule ON/OFF
@angel_3v6572 жыл бұрын
Could you please explain how to do with the blynk? the blynk was updated and now it's different. aid
@venkatbabu17223 жыл бұрын
Home electronics are always a wiz for some home management works.
@fhussainmomin2683 жыл бұрын
Great Sir,,, please add with Bluetooth... And epprom laibery..
@TechStudyCell3 жыл бұрын
Bluetooth + WiFi watch this video kzbin.info/www/bejne/n5eufpxjaNqZb7M. I will try make (Bluetooth + IR + Manual) in future. Thanks
@sanctuaryjames34343 жыл бұрын
@@TechStudyCell Please make 4-in-1 Bluetooth +WiFi+IR remote+Push Button
@r.pranay44863 жыл бұрын
Your videos are awesome. I have one doubt i.e,Can we connect to Epson projector as one of the appliance. Pls reply bro.
@ultimateaquatics91143 жыл бұрын
Yes You can use any device which uses an AC supply
@r.pranay44863 жыл бұрын
@@ultimateaquatics9114 ok tqsm
@olisahopene9473 жыл бұрын
excellent excellent and fantastic DIY video of 2021 Bravo
@TechStudyCell3 жыл бұрын
Thanks
@AAdnaanmtl3 жыл бұрын
Excellent work sir dimmer is an essential part of home Automation can you please add that also including eeprom function including Bluetooth. Thanks for sharing excellent project.
@TechStudyCell3 жыл бұрын
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.
@jitendrakumarbaral90203 жыл бұрын
once wifi disconect from esp 32 it can not reconnect again,after reset the power it can connect with network also ir system not working some time
@dipaksonone29173 жыл бұрын
Sir can we do the same with esp8266? Plz ans.
@electronic79793 жыл бұрын
A very good project 👍
@TechStudyCell3 жыл бұрын
Many thanks
@montushmalakar71873 жыл бұрын
Please upload a video how to soldering all the components into circuit
@AyanAdin3 жыл бұрын
Sir can you please help me to add some additional features like shedule time and timer looping
@suhairvennakkad3 жыл бұрын
Awsome Video, Please make a video for ESP8266 with same Functions, and please explain how the code works and how to modify it. thankyou...
@gunasekhar51203 жыл бұрын
Great work brother ❤️ very useful one
@TechStudyCell3 жыл бұрын
Thanks
@gunasekhar51203 жыл бұрын
Can we use this code for esp8266
@SumanKumar-bg3fc3 жыл бұрын
Please create a tutorial where fan dimmer circuit is automated. Please also make a video control using ( wifi + bluetooth + ir remote + manual button)
@TechStudyCell3 жыл бұрын
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.
@MasterAudio563 жыл бұрын
super work to learn with u dear brother .
@TechStudyCell3 жыл бұрын
Glad to hear that
@pranatabhowmik94583 жыл бұрын
Excellent bro. Hila dila
@saleemsadruddin43263 жыл бұрын
If Wifi is disconnected than it has to be manual reset, please amend code to reconnect automatically
@pranatabhowmik94583 жыл бұрын
Excellent bro. Love from west bengal
@TechStudyCell3 жыл бұрын
Thank you so much
@suresh75422 жыл бұрын
is it possible to use ldr control in place of ir sensor to control all leds
@raushankashyap14822 жыл бұрын
I have ESP 01 module, how to make this project for using esp 01 module and Arduino
@yaarishlights49043 жыл бұрын
Awesome and very useful video thank you
@TechStudyCell3 жыл бұрын
You are welcome
@varunkumarr96333 жыл бұрын
Bro i tried this and i faced one problem When you switch on the device without connect to the wifi it doesn’t works You have to connect to wifi at least once to start working with it and it shouldn’t be like that. Some times if there is no wifi and the device like you switch off and then on then it doesn’t works until it connect to wifi again Please find a solution for this.
@jagdishchauhan8683 Жыл бұрын
Great project sir ir ki jagahpe RF wala banaona
@mrs7935 Жыл бұрын
the main part is code and you should explain it if you know the how code works except changing credentials
@MahmoudMohamed-jc7io3 жыл бұрын
i love youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
@samirbbc36053 жыл бұрын
great work please create system using Arduino and WiFi module ESP01 | with Bluetooth & Manual control 16 Relay
@TechStudyCell3 жыл бұрын
you can check out this video kzbin.info/www/bejne/o4vVgqOCppV-g80
@nangskhemkhongwir60763 жыл бұрын
what is the code to add extra Bluetooth here
@jo_tech_official25293 жыл бұрын
good idea super bro keep it up !!!!!!!!!!!!
@nimaiadak25633 жыл бұрын
The video that i have wanted for a long time.. thank you sir🙏🙏 The project will be very usefull for me if it has bluetooth with all the controll that it has. If u get some extra time then pls give the code with all of this controll including bluetooth. Thank you again sir..
@yogendrajamsariya11933 жыл бұрын
Super awesome bro ❤️❤️❤️
@TechStudyCell3 жыл бұрын
Thanks
@anandhurajeev4046 Жыл бұрын
Pls upload vedio, by using 16 module relay, control with ir, blink, manual
@Shil64803 жыл бұрын
Great sir👍👌
@TechStudyCell3 жыл бұрын
thanks
@ameenenterprise58692 жыл бұрын
Sir plz oprating 3 stepper moter clock and anti clock ways
@kleber43903 жыл бұрын
muito bom meu amigo parabens! uma duvida: como usar um display lcd nas portas I2c (21 e 22)?
@anokhautomation44533 жыл бұрын
🎉🎉🎉🎉🎉sooper 👌👌👍👍
@vishaljain61303 жыл бұрын
good. how many devices might be connect with Alexa echo dot (4th generation) without using 3rd party app. In earlier video which you made , you do not describe regarding.
@ranjeeth08082 жыл бұрын
Bro, In blynk app , there is no option for virtual pin V4 v5 and all, only v0- V3 available.
@keshavgupta34513 жыл бұрын
Great project but can we use google home with this project (blynk+remote+manual+google voice) plz reply fast i need to make this for my college project. I already seen your videos with google home and alexa but there sinric pro is used not blynk.
@matthiash.4542 жыл бұрын
You have 220 volts AC____bulbs connected to the output of the relay I want to connect WS2812B___ 5 volts DC is this possible ?
@nangskhemkhongwir60762 жыл бұрын
Sir, can you make a tutorial video on how to create Bluetooth switch apps in MIT apps inventor?
@varunkumarr96332 жыл бұрын
Can you make the same video with Nodemcu with 4ch relay ???
@ArtisanPallet3 жыл бұрын
Thanks for sharing...
@TechStudyCell3 жыл бұрын
Welcome
@rlakhotia3 жыл бұрын
Can we use Capactive touch sensor module instead of push button switches
@prashantjadhav25923 жыл бұрын
Sir project is great i also watched your eso32 pwm demmer project Can u add it for one rely in this project
@ravirtech12603 жыл бұрын
Hi sir I compiled this program arduino droid to android apk but sketch not compiled error show button1Hendler problem please help
@keshavgupta34513 жыл бұрын
Bro nice work. But can i link the blynk with google assistant using ifttt in this project. Plz reply fast is it possible to connect blynk with ifttt in this same project. And plz tell if codes have to be modify or not
@likhithk90762 жыл бұрын
Thanks soo much bro
@TechStudyCell2 жыл бұрын
Welcome
@dilshankasthuriarachchi47373 жыл бұрын
Hi sir can we use these three options at one? I mean using 1 ( i want you to know are all these option available in one) code we can control this via blynk app, ir remote, and manual cant we ? Dont want to update code for these three option separately ?
@meanonymous10002 жыл бұрын
Please add pinstatus storing feature to regain the same pin status after reboot
@ShuklaTechnology220811 ай бұрын
Nyc
@jitendrakumarbaral90203 жыл бұрын
Other wise it's a good project
@gsvasanth90773 жыл бұрын
Keep it up bro
@TechStudyCell3 жыл бұрын
Thanks
@agilavang79093 жыл бұрын
Is it possible to configure automation control via wifi , bluetooth , IR , manual and timer scheduler together in same kit with ESP32
@mxmxjrjr2 жыл бұрын
Hi When all the light is on. Should esp32 power down, and power back on again. Will the light on or off? If light remain off after esp32 restart, what need to be done to make sure it goes to previous state after esp32 restart
@kamalkumarsahu30363 жыл бұрын
Sir please make a video for 8-channel with (Google assistant+manual+blynk)
@TechStudyCell3 жыл бұрын
Noted
@عبدالحميدضباب3 жыл бұрын
How can we amend the project to choose the Wi-Fi network from the phone
@عبدالحميدضباب3 жыл бұрын
Thank you so much
@TechStudyCell3 жыл бұрын
You're most welcome
@sanketyelekar92443 жыл бұрын
Sir plz same project with ac fan speed controller
@mahantkumaryadav44303 жыл бұрын
blynk library add krne pr ye error aa rha h---- Specified folder/zip file does not contain a valid library
@Ram-bf7xq2 жыл бұрын
Please make it with EEPROM
@monikasagar95993 жыл бұрын
Can you plz show me ........how can I connect 9V battery to the relay module.....I m making this project using relay module but it is not working
@hsmonster73393 жыл бұрын
Osm broo
@tushthushan5590 Жыл бұрын
Is it possible to replace that relay with a pwm controller?
@Angel_ways_11222 жыл бұрын
can i use nodemcu esp32 38 pin controller
@ARCELECTRONIC993 жыл бұрын
Thanks for sharing, my name is achmad from indonesia. I would like to asked you about the relay, is it fine to use it for long term condition? Cause the relay in only 5v dc, is that fine for covering the AC 220v for using in daily rutine as a switch replacement. Hope you will reply me and give me your suggestion. Thank you sir 👍👍👍
@jito79213 жыл бұрын
Can you please add lamp dimmer in this project.
@suneeshkh76983 жыл бұрын
Welldone. 🔥👍 Is there timer function available for each load?
@TechStudyCell3 жыл бұрын
Sorry. Question is not clear to me.
@vcooltm87693 жыл бұрын
is there an esp8266 version of his...
@vigneshmani49233 жыл бұрын
At the time of compiling (Variable or field 'blynkwidgetwrite1'declared void error )Showing ,kindly suggest anyone help to fix this
@kingstone20982 жыл бұрын
Can i use Another board like nodemcu 8266 1.0 with this code is it work????
@poojaapni30442 жыл бұрын
kya me eps32 ki jagah esp8266 use kr sakti hu
@_munna_3 жыл бұрын
👌👌👌
@JoseReyes-cb3lq3 жыл бұрын
is it posible on arduino mega ethernet shield?? Can you please help me??
@mdtabrejaalam66722 жыл бұрын
Hlo sir, This code note support my mobile phone oppo Reno 3 tell me this apps for see
@mohankarunamurthy97393 жыл бұрын
Thanks nicely explaining it. why you are not using ESP826 board for this project? any specific reason?
@TechStudyCell3 жыл бұрын
For 3 relays you can go for NodeMCU ESP8266.
@mohankarunamurthy97393 жыл бұрын
@@TechStudyCell how many relays control in NodeMCU? Can we use IR remote system in NodeMCU?
@noorathar50433 жыл бұрын
Sir can I use nodemcu esp8266 same project
@malharkhairnar4853 жыл бұрын
Where did you connected BC547 transistor?
@masumreza50672 жыл бұрын
what about durability?
@Ram-bf7xq2 жыл бұрын
To save previous data after power cut
@vilasarkadi1721 Жыл бұрын
I have tried this but my IR remote is not working , all other parameters are working fine This problem I got with ESP8266 also, Pl advise. Also can you supply me PCB for this ESP 32 project. How much I should pay you? I like your voice and over all presentation very much. I am a retired Electrical Engineer with Industry & teaching background
@TechStudyCell Жыл бұрын
Please send a email with your address to connect.techstudycell@gmail.com
@sparshgupta4706 Жыл бұрын
How can i use 2 chanel relay
@mkingkingm4173 жыл бұрын
Where is the BC547 transistor is connected?
@montushmalakar71873 жыл бұрын
What app used for circuit design
@sureshnagasuri2963 жыл бұрын
Sir good morning Could you please make oxigen conector
@yogeshnimje35753 жыл бұрын
Can we operate 16 relays in esp32 using wifi, bluetooth, IR
@shakilahmed68702 жыл бұрын
Only thing that is lacking here is the speed control system for fan.
@ChandanKumar-kr2kj3 жыл бұрын
Switch code compilation error...
@sonu99992084992 жыл бұрын
Sir pls add 9 step fan regulator and with eeprom function
@mohankarunamurthy97393 жыл бұрын
Can you please do the water level senor by using nodemuc and ultrasonic sensors?
@TechStudyCell3 жыл бұрын
Noted
@walterb.telesteles583 жыл бұрын
muito bom meu amigo parabens! voce poderia fazer um exemplo com MIT App Inventor. des de já obigado
@mohitparikh44553 жыл бұрын
sir Great, its looks very interesting. Can we use NodeMCU in place of ESP32 Dev board ?
@TechStudyCell3 жыл бұрын
Yes. but you can control max 3 relays.
@mohitparikh44553 жыл бұрын
@@TechStudyCell why, I am already controlling 4 relays with NodeMCU and working well..😟
@39ayushtiwari473 жыл бұрын
@@mohitparikh4455 great Can you pls Share the code for nodemcu
@chinmaykumardash88852 жыл бұрын
Please make a video home automation control application with this things Alexa, Bluetooth, ir remort, along with manual switch Please bro please conceder
@morthabalaji83583 жыл бұрын
It suitable for esp8266
@DodoToons7473 ай бұрын
Hex code is not working
@kathirvelm12133 жыл бұрын
Make 220v to 5v also in the board for supply
@gobindahalder15833 жыл бұрын
Sir please make TTP223 touch module+ blynk app + RF remote with 8 channel relay
@ashwinirandive27483 жыл бұрын
Sir please create a video of fan speed control using wifi, ir remote and manual.
@TechStudyCell3 жыл бұрын
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.
@dipaksonone29173 жыл бұрын
Sir plz i want to make blynk +ir project...plz help me
@ravirtech12603 жыл бұрын
Nice job sir ye project nodemcu ke sath kar sakte hai and add the rf remote
@TechStudyCell3 жыл бұрын
For 3 relays you can use NodeMCU. will try to make video on it.
@ravirtech12603 жыл бұрын
@@TechStudyCell ok can't make wifi and rf remote 8 channle relay board please