Homemade Compost Screener (tromel)- Sejalnik zemlje ali komposta DIY

This is easy and compact soil or compost screener / sifter /tromel, it can be mounted on trailer for garden tractor or can stand alone.
Almost all parts are from scarp material, we buy only net ...
You need:
- Beraing with housing
- Forklift wheel, front, small (Hand Pallet Truck)
- Motor from wash dryer or oil burner, minimum power 150w at 3.000rpm
- Big pulley from washing machine
- Oil barrel
- Some iron
- Wowen netting, hole min 14mm or 1/2""
IMPORTANT: Tromel should rotate with cca 30 rpm ... not more !!
Have fun.

[@alrhon50]

Possibly one of the better ones I've seen. If not the best

[@WSCEngineering]

Great video. Thanks! I will use a lot of your ideas when I build mine ! I did not know that you could by those bearings at Tractor Supply . All of the stuff required to build this design, is crap I have laying around the house/acreage.

[@oldfarmer9004]

Very good! Id pick the bigger rocks out. No reason to put them in and beat up your machine.

[@yarrariver09]

this is the most simple and handful soil screener. good design.

[@MrHeathcliff83]

me is the most handsome and simple soil screener and me can make babies :-D

[@sharonhampton5173]

Best unit I’ve seen so far

[@GeorgiaDawgAthens]

Kaldrostream (a.k.a., flixzone) is a bot which has attacked KZbin luring KZbinrs to their (Russian?) fake site to steal your data. Avoid Kaldrostream and Flixzone completely. KaldroStream in the KZbin comments ► What is it? How to deal with this? kzbin.info/www/bejne/gl7LpKSIp6yffLc

[@askquestionstrythings]

Very nice, that's much more compact than the one I'm working on.

[@rodneycampbell2978]

I would worry about those big rocks hitting the motor. I want one of these.

[@dholtman5977]

Great design! I think I might move my motor to the front so that it won't get hit by anything. Do you think a cordless drill could power that?

[@dholtman5977]

Or a corded drill?

[@phoenixkepo2743]

Excellent design!

[@andyjones6361]

Great compact design but cross bar really hampers the trash exit

[@igortrcek9832]

Right, but you can increase clearing in exit. I do it in next build.

[@KANDU100]

Buenas noches. Lo felicito es genial. Quería preguntarle aproximadamente a cuantas revoluciones gira el tambor?

[@urednik123]

max 32rpm.

[@KarasCyborg]

Needs to be at an angle where the rocks can just roll out of the trommel.

[@urednik123]

Only cca 1-2 cm is intake hole higher as outake hole.

[@stapeley100]

Can you not build it at a angle no need to tip it then . But still good .

[@davidwaldoch4381]

Great design. Where can I get a motor like that?

[@urednik123]

Motor is from scarp - it is from oilburner, but you can use any kind of motor with power min. 90W. Reduction must be don to max 32rpm. www.google.si/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwiGveSNjLPWAhUFshQKHWA1BR8QjRwIBw&url=https%3A%2F%2Fwww.yelp.com%2Fbiz%2Fb-lee-oil-burner-service-hawley&psig=AFQjCNEiHCb1vm1bTWLVrBPNWMJAJF9v8A&ust=1505973822017472

[@manjichromagnon5480]

A washing machine

[@smedleypdolittle]

Washing machine or drier.

[@timmorris9036]

What do you have powering the motor?

[@urednik123]

220V cca 100W

[@rickstevens5328]

Do you have build plans?

[@urednik123]

There is no need for build plan. It is so easy to build. You need only one 210l barrel, and one frame from 30x40 iron pipes, from pipec you build frame 1m x 0,6m. Depend of the motor rpm, you calculate transmission. Barrel rotation must be under 30 rpm. Screener holes depend of your use. For soil, compost I recommend 14x14mm.

[@cansein]

ersuch das mal mit einem feuchten Kompost aus dem Silo🤪

[@7703160]

Waste of time