Homemade DOUBLE Lawn MOWER

[@champagneave]

Okay one question did it leave a little mohawk between down the middle or did the blades eventually hit?

[@joshmanis9860]

Well you saw how close they were and it wouldn’t leave a little Mohawk because riding mower are basically setup the same

[@bblubb]

No they are not! And yes it does leave a mohawk. If it doesn't right now w8 until it's used 3 times.. ​@@joshmanis9860

[@bblubb]

No they are definitely not "basically" the same lol And yes it does leave a mohawk. If it doesn't right now just w8 until it's used 3 times 🙈

[@Cheezzitking]

@@joshmanis9860 haha no. riding mower decks are slightly diagonal so that the blades hit every single blade and dont leave a mohawk

[@joshmanis9860]

@@Cheezzitking mine aren’t and I own ALOT

[@schm147]

All the random noises and grunting sent me

[@CbrF4i600cc]

Good thing in the final test he drove over already cut grass to show us just how good this cuts

[@stevercarter5317]

Unless the radius of the two blades overlap they will leave an uncut area between them.

[@CjGaughan]

That must be why he showed them overlapping in the video then. 😂

[@keatonthompson5925]

it’s almost like you didn’t have your eyes open when you watched the video

[@kamikaze1453]

All this to avoid one extra sweep with the mower, like a true American dad

[@svanginault]

Uh.. It's way more than just 1 extra sweep.. That's cutting his mow job in half completely.

[@SatiricalLizard]

He sounds like a looney tunes character

[@SparkyDabs]

sounds like hes on the spectrum to me

[@jacobg6528]

@SparkyDabs dude has 2m subs from doing almost nothing lol

[@alpharaptor7510]

At least those 2 flat head Briggs engines will live on forever

[@meegstomtom]

I have throw tons of these away. Lot of them where cheap and not worth fixing.

[@artursmihelsons415]

Why using zip ties for engine stop-brakes if both handles can be welded together like lawnmowers themselves!? 🤔

[@ninenumbersmusic8269]

If the blades of the two mowers don’t overlap won’t there be a strip of grass uncut between the decks? And if they do overlap they better share one drive belt or those blades won’t survive very long

[@aaronmiller8625]

I don’t know of any mower blades that overlap? Not saying they don’t exist, but that’s much more dangerous and timing is key. Most mowers don’t have timing belts, just regular drive belts. They just come very close together, the lift of the blade does the rest to not leave patches.

[@ministryofwrongthink6962]

Having the blades literally touching each other is so f**ed 😵‍💫

[@GamingWLexx]

Repent and believe in the gospel of Jesus Christ and you will be saved 😁

[@sparrowhawk8539]

​@@GamingWLexx Mathew 7:1-3

[@GamingWLexx]

@@sparrowhawk8539 it is not about judging, it is a message of love. So that you may be saved.

[@ZNX05]

Thank you ​@@sparrowhawk8539

[@SAINTLUCIFER_WG]

​@@GamingWLexxnobody asked

[@asusplayer_]

Bro is out here creating siamese twins 💀😭

[@marcquees5312]

💀💀💀💀

[@user-nf3oq2ge3g]

Put the whole car together and line your body panels up before you paint it. More work but you will notice the body lines immediately and fix them before your paint it. I spent 18 hrs on my car lining up body panels so the gaps are all perfectly 1/8”. That’s a crucial step and makes any paint job look good roll it outside and have many people look at it and inspect your work. You want it perfect to start with, I always invite some friends over to look for dents and stuff I missed. Looking at the same rig over and over again your eyes get dull to mistakes, but the fresh eyes help. Block sand it all together and fitted. Then pull apart and paint. This is the step that sets all paint jobs apart. Proper block sanding …. Sylvestors customs will show you all you need at this stage.

[@fishtheusa]

I think you commented on the wrong video there bub..

[@user-nf3oq2ge3g]

@@fishtheusa how the heck did that happen. I posted on smedia and my phone glitched. And I had to restart it. Some things in technology are just better left unexplained haha

[@JeffDelMusic]

I love this lol

[@SAArch82]

I like to think that you may be the type of guy whose biggest issue with these lawnmowers was the less than perfect welds and lack of paint.

[@johndeerekid167]

Was not disappointed. Red Green award for sure.

[@crystalboutte9880]

That's actually a pretty cool idea

[@ronmurphy9819]

I really enjoy this kind of thing! Thank you for the bright spot!

[@ryanrussell1976]

Now get the blade in the 2nd mower to spin in the opposite direction and create a discharge tube on the other side for maximum efficiency

[@flowlitely]

Bro just casually has a riding mower about the same size just right there

[@thatoneguy_with_too_many_cats]

that is a racing mower, the deck was taken off

[@motog4-75]

Yea I was wondering about the ride on in the background. Maybe he has converted that to a smoothie making machine.

[@Warlock339]

That isn’t a mower it’s a go cart

[@ThisTimeTheWorld]

Im just surprised he didnt bolt it to a honda civic

[@saltysalt397]

This is giving off how to basic vibes

[@TheAlienware89]

Maybe 3 or 4?

[@wildrustyboi]

Make it so you can tow it with your race mower

[@1Himiko7Toga]

Oh so you clicked on my video because you cant afford a $5,000 mower. "I gotchu" 😂😂😂😂

[@ligmaballs5536]

Get some Velcro straps so you can reuse so you don't have to buy so many zip ties

[@MJM17]

Somebody show this to the “Double Rainbow” guy! 😂

[@themerculator]

WOW! What does it mean?

[@chilledburrito]

Bro finally unlocked the akimbo perk.

[@leroux-ianni]

I bet no one is going to copy this "idea"

[@Jay931]

Doing this is also a good way to stay in shape instead of riding a zero turn…… 🔥

[@davidbreitwieser3591]

Red green did this shit in 1993, congratulations you’re late to the party

[@Benjamin-ek4iu]

I miss that show. Good stuff

[@josh33025]

All i hear is his voice now.

[@novocaine223]

I like my guy work shop

[@chrisbell1766]

Yea kinda stupid but hope the guy had fun anyways 😒

[@themaskedmusician4846]

You don’t seem like you’d be very much fun to be around

[@chrisbell1766]

@@themaskedmusician4846 So

[@GlorifiedGremlin]

That thing definitely wants to shake itself apart 😂

[@danbledsoe7582]

Could buy a new double push mower for the price of the time, effort, and materials used here.

[@elizabethcobb3316]

Where's the fun in that?

[@BakuganBrawler211]

So now Google can read my thoughts…

[@straight-up-shots]

Velcro strap for the handles

[@randomguyvonebay3719]

And in the back, he has a real land mower tractor

[@sandasturner9529]

Oh look! They are holding hands!!!!😊🎉❤

[@elizabethcobb3316]

Thats quire a nice shop you've got! Wish youd shown a view of the mowed lawn. Wasnt there a rider mower in the background?

[@mikeengram4405]

well the wife might get pissed but I guess I might have to find two spare lawnmowers 😂😂

[@mikeengram4405]

update shes pissed but happy works damn good 😂

[@jerrypocha3707]

Been wanting to try that, slapping two mowers together. I would weld a bar joining the safety release bars together.

[@Seattlefan77]

Dude's gotta be French cause those were some very French noises he was making

[@austinlyles6152]

There’s no way that doesn’t leave a landing strip right down the middle…

[@wesaultman8220]

This is a real life sims character

[@nvragn]

Nice..I'm cerious to see what it's like now and how is it working? If you had to guess what do you think that you have into it. Time and money? Only if you want to say of course. It's definitely a cool thing to look at 👍🇨🇦🔧

[@preechawisetarnon2773]

ฟะไพไหหดเัำัำเก้กัด่

[@donaldmills4340]

He's learning his job qualities speaking that sims language

[@geniferteal4178]

I hear if you keep the tiewrap loose, but just tight enough. It'll do the job and you can slide it back down the handle until next time.

[@moonshinershonor202]

Y'all hear about how micro plastics have been detected in testicles now? Its because plastics get left outside to rot and they eventually end up in our water and food, like fish.

[@Dolo-oz6is]

It would be awkward if one doesn’t start lol

[@motog4-75]

Has this guy met Boris? They'd make a team.

[@j.d.emerson9190]

Batman has a new super villain double dude

[@Adrenalinmanijaci]

I have been thinking about this for the past 3 days, didnt tell a single soul, or told it aloud, didnt even type it in google or anywhere else.

[@TheHallFarm]

This happens to me so often it scares the crap out of me. Makes me feel like they’ve already figured out they don’t need the brain chips anymore

[@kozmicflush980]

Somebody get this man a go pro

[@user-vy9ug5ox5o]

Add 5 more

[@emilsmith6056]

I was a landscaper for 10 years. This really isn't a bad idea if you can make it safe and have a lot of mowing to do regularly.

[@showtimes1000]

The well behind death trap 😂

[@ruslan1975]

Bro doesn't want waste time 😂😂😂

[@idranktoomuch2]

I have 2 push mowers, same feeling, will be my next project, thanks 👍

[@cornerconversation]

Son mow the lawn. My brother. Double it and give it to someone else What I have to deal with 😂

[@Justin-ou6gq]

Couldve maybe changed blade heights so you get blade overlap

[@michaelchaikoski9304]

Good idea, but maybe it could pivot in the middle for unlevel terrain

[@bluegrassoutdoors]

Very interesting 👍 Twice the gas though!

[@gavinwreede1727]

Now you need to take both engines off and put a big engine on it

[@williamhadley1580]

The human centipede doctor goes into the lawn equipment business.

[@BleedingWhiteKnuckles]

Good job you made a adjustable height lawnnower into a non-adjustable height underpowered brush hog, kinda.....

[@NotAGame611]

Double the power double the gas

[@andrewjones4332]

Apparently he is gonna mow every other day since the mower he welded into the other will clog up with grass/debris as soon as it actually grows as he welded it so it gets thrown into other mower instead of out other end if he cuts 1 shoulda cut both. Really sucks when 1 breaks down and only 1 side cuts and he has to push 2 mowers for same passes as started with.

[@skyrockte_36]

I’m fast as f*** boooooy 😂😂😂

[@jamarianmcdaniel596]

All it needs is swivel wheels in the front 😏

[@KnobVeweFarms-vf2pd]

That’s where a zero turn comes in

[@mikehoke1028]

We’ve came a long way from the old school hand push

[@Matthew_Removeafterwashing]

make the second one run backwards and put some gearing to sync them and put them closer so they overlap, that will avoid unmowed spots between blades and will be way more cooler

[@Brandon-sc3zv]

them blades are so close i doubt hes missing much if any at all, it honestly looked to cut pretty nice🤣🤣

[@Matthew_Removeafterwashing]

@@Brandon-sc3zv original one was working pretty nice as well. This is not about making something work, it has to be different

[@habibifather7681]

I think you might have had a little too much vodka.

[@JoseRodriguez-dx4pb]

Hell naw!!! Mowing the lawn is one of those rare times I get to myself, I'd rather take my time doing it🙂

[@frankie7508]

It's superior at clogging, Not cutting. Think he's smarter than an engineer, But after a few uses he will figure it out. People learn the hard way. And why would Toro destroy their good name designing and selling such a piece of junk?????

[@nathanarsenault2864]

But you can't deny it looks pretty darn awesome 😎

[@frankie7508]

@@nathanarsenault2864 And so do most women. But then a person makes the mistake of marrying one of them. Only to find out then what a monster they really are. So it's okay to rent one of these clogging machines. But don't buy it. That is unless you have a prenuptial agreement or are smart enough.Simply never to get married. Otherwise it won't perform and it'll be a big money pit. But I agree, it looks great.

[@4.0gpa44]

​@@frankie7508People that live with someone and won't get married are fornicators and will be judged by God.

[@yungfiend6830]

Just wait till you gotta mow up hill

[@ThisTimeTheWorld]

I would have turned one around backwards and put the brackets back on in the middle so it had 1 normal handle

[@KD-hx8qp]

Now you have 2 junk mowers welded together

[@Hudso84]

Next thing is a hinge so it folds like a batwing mower so it flexes

[@indigo_tribe]

One mower has to do 50% more work with the ejections from the other one going into it.

[@amathis7292]

This is ah how u say a stupido!!!

[@user-ns2qo2mn7w]

😮the mowmowerer

[@ItzDucko_Edits]

Or just get a ride on lawn mower

[@BigDreamsLS]

I’m just lost why’d you put the zip ties on so tight if you had them on loose, you could’ve just slid them off to the side

[@NotImportant101]

Verdy nioce

[@D3XNO]

That’s when you just buy a twin blade

[@Artz206]

We know What man is talking about love your videos😊

[@user-nf3oq2ge3g]

The poor mans wide track haha

[@HolowatyVlogs]

Why didn’t you join the two throttle cables?

[@northwestmountainbikeaddic6874]

Still a push mower? No thanks! But still a cool thing to build, but now you have to push the weight of 2 mowers that are not self propelled

[@EliCook-jz2zz]

Great idea You should do ten together

[@AnthonyHarris-dy8pi]

Ok that's a pretty cool idea

[@user-jb8eb3lv8s]

I like your work all these dumb people can't see your talent

[@_Junkers]

Won't the mulch of one bog down the other? Starting the second one must have been fun

[@mycaddigo]

Useless for high grass The one mower would transfer everything to Other mower overwhelming it . If you had an ejection port for each one it would work , but I bet there would be a 1 inch line of grass that wools Be missed in the center…..

[@scoppyeah]

Let’s add a third one next

[@waltermontoya8212]

Kickin It ain't going to make it work better and for the price of what a riding mower is the only thing I see here is that you're using the one Mower on the left to throw grass into the other mower which makes it harder on that mower to push all that grass out

[@elizabethcobb3316]

Well put!!

[@PPDubz69]

Just make one giant one to do the whole lawn in one pass

[@stephengalloway6604]

Things i do when im bored

[@CrazyDadNitro-2.0]

Awesome idea. They will be sold at Lowes now😂😂😂. Great build👍always 😊

[@Brady500_1]

Why is he using to push mowers when he has a stinking John Deere?

[@calibos3329]

Nice welds

[@user-qh7ct2nt6k]

With the amount of tie that took you could’ve finished the lawn by now lol