The simple bleaching method that can be used for distilled waste motor oil based fuel. Contact: ferromit@ferromit.com Website: www.ferromit.c... #science #blackdiesel #industrialfuel #wmo #automobile #diy #refinery
Пікірлер: 193
@davidotness61994 ай бұрын
Very good to know these simple formulas, especially if using for diesel fuel. number one you don't want to foul your fuel pump nor cause any internal wear, but also keeping your injector tips as clean as possible for as long as possible is the trick to engine longevity. New standards for today's fuels remove too much sulfur from the diesel, causing fuel pumps in older diesels to wear out too soon, so formulating the fuel to the age of ones engine is important. Thanks for another good one, Alek. If you wrote a book I'd sure buy it.
@santeryi94 ай бұрын
Thanks a lot for your interest, I also have videos where I use no acid methods.
@vintageringsGarry22 күн бұрын
Wow
@staym9252 жыл бұрын
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
@tungvu92911 ай бұрын
Thêm vào khi trưng cất hay khi đã thành dầu diesel vậy bạn
@adityadany3013 Жыл бұрын
great video tutorial sir, but i want to ask about the power used in 2nd step. what is it?
@santeryi9 Жыл бұрын
The powder is baking soda.
@kondwanibanda421927 күн бұрын
Hie aleck today i tried to clean my distilled oil using this method but my resulting fuel turned out to be redish in colour not goden yellow where am i going wrong
@santeryi924 күн бұрын
Hi, there could be many factors, the first one is the actual distilled oil is a product of pyrolysis not a continuous distillation, so more oxidized at the start, was not settled for a few days, also you may need to settle it longer after acid reaction, plus try to reduce acid amount to 0.5%, and try to use a washing soda instead of baking one - (sodium Carbonate 10% water solution to make 10% of volume in relation to treated oil).
@SipronioBelardo4 ай бұрын
can we use the same process to remove the odor of rubber oil/fuel?
@santeryi94 ай бұрын
Yes sure, though experiment first.
@kzulite3 жыл бұрын
You are great scientist mate! congrats!. I would like to learn a lot from you! Thanks for all!
@axlyosef49603 жыл бұрын
I realize it is pretty off topic but do anybody know of a good website to watch new movies online ?
@zaynarcher97933 жыл бұрын
@Axl Yosef Meh lately I've been using Flixportal. just search on google for it:P -zayn
@axlyosef49603 жыл бұрын
@Zayn Archer Thank you, I signed up and it seems like they got a lot of movies there :) I appreciate it !!
@kelechikingsley58997 ай бұрын
How is the used engine oil distilled before adding the sulphuric acid?
@santeryi97 ай бұрын
Check these steps: kzbin.info/www/bejne/bpiln6p3g52ilas
@kelechikingsley58997 ай бұрын
@@santeryi9 Thanks. But, can I construct this myself.
@nuedinaktechnologies900 Жыл бұрын
Great video sir, But do I have to boil the oil ?, and is that sodium hydroxide? Thanks
@antoniosestar3671 Жыл бұрын
Ethanol/methanol+sodium hydroxide, no heating required
@babargill81684 жыл бұрын
U Are good I trying at my home Yes it's working Bundle of thanks Babar gill frome Pakistan
@santeryi94 жыл бұрын
Thank you.
@jameswatters9592 Жыл бұрын
great video but just one question, what do you do and how do you get rid of your waste products, surely not down the sink or in your domestic waste?
@linctexpilot83375 ай бұрын
I’ve been playing with a Similar process… The waste products are burned it to create heat for the refining process
@linctexpilot83375 ай бұрын
I’ve been playing with a Similar process… The waste products are burned it to create heat for the refining process
@markhonigschmid6116 Жыл бұрын
Hello! Would it be a difference to repeat the whole procedure with acid and soda?
@sammyd78575 ай бұрын
You mentioned it can be used as is at the start but looking at the solids that came out of it that would be a bad idea
@santeryi95 ай бұрын
the acid will produce some sort of asid bitumen even from clear hydrocarbon, so if it is transparent but dark, the dencity is resemble the diesel fuel, no copper stripe reaction and smell is not a factor, then it can be used as is after simple silica gel settling.
@devilswish88763 жыл бұрын
can you tell my how that used oil react with oxidisers? ore how is that staff viscosity made Im not shure how temperature resistance is made of oil ore their viscosity . And is it posibel chemicaly to turn that oil to diferent fuel tipes with out destiler? Im wondering because I like the idea of useing seperators for my car most clean burn I get from alcohole and I belive less polution at exaust Im not shure tought if it is posibel to use oil and alcohole together???
@leyendas_de_pueblo2 жыл бұрын
hello friend, please could you tell me the materials you use. I would appreciate your answer
@freddyhuaman55702 жыл бұрын
good evening a question about sulfuric acid and triethanomaline what amount was made 
@johnniepatton43528 ай бұрын
Wat else can i supplement baking soda with?
@HABRO-Realestate4 жыл бұрын
I realy liked your video. You explained very well. Very informative. I have three questions if you can help out. 1. How to stabilise the Plastic pyrolysis oil. 2. How de acidified the pyrolysis oil. 3. And how to bleach the oil. Waiting for your reply sir.
@santeryi94 жыл бұрын
Too much to answer, please send your questions to my personal box via the contact page: www.ferromit.com/contact.html
@JimLahey212 жыл бұрын
Is the old bit of fence Stirring stick a requirement haha
@loricoenvirotech20322 жыл бұрын
You're great Sir! God bless you. Can I ask you if I can do this bleaching method for my waste motor oil but it is not distilled oil, it is a centrifuged oil product of centrifugation process. I don't do distillation process of cleaning waste oil. I am just cleaning my waste oil through centrifuge machine. The centrifuged oil is black, I want to bleach it to make it a little bit transparent. I saw this video and I want to try it also. I am not sure if I can do the same process with the centrifuge oil,not distilled oil. Thank you.
@santeryi92 жыл бұрын
Hi, no it is really difficult to bleach used motor oil as such, you may try this method, but keep the oil at about 50c: kzbin.info/www/bejne/j4a3ZY2HgqeajNE you may make it cleaner, not transparent.
@loricoenvirotech20322 жыл бұрын
@@santeryi9 thank you so much sir.
@carsnanidiot4 ай бұрын
how much baking soda pr 1 liter?
@anjaniebridgemohan6838 Жыл бұрын
What is the white substance added to the black oil
@Termiic Жыл бұрын
Sodium bicarbonate NaHCO3, baking soda.
@edafeonome41583 жыл бұрын
great experiment . can one use the same process to bleach kerosene to pure colourless
@santeryi93 жыл бұрын
Yes, you can
@gerrymulroy25452 жыл бұрын
What is the purpose of all this ? Doesn't "black diesel" work just as well ?
@santeryi92 жыл бұрын
First, a modern engine will not be able to digest black diesel. Some old stationery ones will give no hack about the fuel type or quality. Second, any fine-filtered used motor oil is still packed with unburnable additives that are not so great for a fuel system. The benefit of this process is - the vehicle's engine works the same as with the standard diesel fuel, with no smoke, no coked injectors, and no busted fuel pump. Also, there is no need for a double fuel tank system to switch from one fuel to another to flush the pump and injectors before stopping or starting the engine. In other words - one can make regular diesel fuel in a backyard
@husbyugur77 Жыл бұрын
can you also not use it as engine oil again ? aswel as diesel feul?
@santeryi9 Жыл бұрын
You can convert it back to motor oil by adding required additives.
@buhariyusif58272 жыл бұрын
Can you please help with all the ingredients for bleaching used engine oil
@staym9252 жыл бұрын
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
@Narrowmindedoffrod5 жыл бұрын
Can you use sulphuric acid in bigger quantities of used motor oil to clean it.just use 1% of it?
@mooobash35902 жыл бұрын
what is the concentration of the acid? 50% 95%?
@arbit3r Жыл бұрын
@@mooobash3590 98
@bryanroshan77874 жыл бұрын
If pyrolysis oil is bleached by this method, would it be useable in an engine without fractionation?
@santeryi94 жыл бұрын
No, you will need to separate the light fraction first.
@jayveemondejar2972 Жыл бұрын
What chemical you added to clear the color?
@carsnanidiot4 ай бұрын
baking soda??
@kelechikingsley58998 ай бұрын
What percentage of baking soda is added?
@santeryi98 ай бұрын
10% of 10% solution.
@gfegfe48795 жыл бұрын
You need to neutralize sufuric acid by sodium hydroxide solution, then to wash with water-ethanol solution to remove sulfonic acid (sodium sulfonate salt) produced by the process
@santeryi95 жыл бұрын
Yes, you have to neutralize it, in my case I do baking soda instead, it is alkali but not so aggressive as hydroxide, after that, you still need to use a bit of absorbent and if doubtful, run the copper strip test and check the PH.
@housnihousni59274 жыл бұрын
Is this oil can be used as an engien oil or as a fuel
@uchennatiger47512 жыл бұрын
@@housnihousni5927 diesel fuel.
@ubaidkhan3294 Жыл бұрын
@@uchennatiger4751 you knw how to refine
@ubaidkhan3294 Жыл бұрын
@@santeryi9 hello can we talk ?
@Виктор-т7ь2э2 жыл бұрын
Добрый день.сода полностью погасила кислоту?
@i_02_shyantankundu328 ай бұрын
Sir what is the filter used ?
@ocheksfx31462 жыл бұрын
What ml of sulfuric acid can be added to 150litres of diesel and also of triethanolamine
@prabhatpandey31322 жыл бұрын
Contact whatapp +919930708046
@markhonigschmid6116 Жыл бұрын
He told something about 1/10 if I listened correct...
@skpayel52494 жыл бұрын
Sir what is ratio backing soda u are use in this?
@habibizerak95673 жыл бұрын
salaam can you pls give me your whatsApp number or whatsApp me +93708880838
@ronysalama88888 ай бұрын
Is it car oil or cooking oil
@santeryi98 ай бұрын
it is a base oil obtained from car oil distillation: kzbin.info/www/bejne/jHmYgZKAqZeBrMk
@nanoxynergies79842 жыл бұрын
Hi, does this method work for plastic pyrolysis diesel?
@santeryi92 жыл бұрын
Yes it will work with diesel from plastic as well.
@metincetin29802 жыл бұрын
@@santeryi9 Is there a method that works for tire oil?
@santeryi92 жыл бұрын
@@metincetin2980 you can try this one: kzbin.info/www/bejne/j4a3ZY2HgqeajNE
@blondezel47722 ай бұрын
Can i use HCL ?
@santeryi92 ай бұрын
What is HCL? hydrochloric acid? no.
@kpgrathnasiri53562 жыл бұрын
Good morning Sir, I try several time to clear used engine oil to clear as your method, but unfortunately I couldn't do it. I used 200mi used oil and 2ml sulfuric acid, baking soda please help me to do this properly thanking u.
@santeryi92 жыл бұрын
I am cleaning already distilled oil, not the one directly from a sump.
@markhonigschmid6116 Жыл бұрын
If I listened correct, you would need 20ml sulfuric acid for 200ml oil.
@thetremoloco48012 ай бұрын
@@markhonigschmid6116you didn’t it’s 2ml
@otmanealaoui6001 Жыл бұрын
What is the white substance that you added please? I want her name
@santeryi9 Жыл бұрын
Baking soda
@otmanealaoui6001 Жыл бұрын
@@santeryi9 The name of the liquid added in the first please
@antoniosestar3671 Жыл бұрын
@@otmanealaoui6001 acid
@nwairehsamuel43783 жыл бұрын
How do i treat used oil in large volume
@ronysalama88888 ай бұрын
How much the temperature of the oil
@santeryi98 ай бұрын
Chemical bleaching - from 20c to 60c, in this case 20c
@zhengyilan11063 жыл бұрын
Can reuse as fuel or diesel?
@santeryi92 жыл бұрын
yes, just run a copper stripe test first, and use.
@qwertyu8862 жыл бұрын
Is it bentonite soda ? Or which one soda it is ?
@santeryi92 жыл бұрын
Just baking soda, check this video: kzbin.info/www/bejne/j4a3ZY2HgqeajNE
@binurtoys55824 күн бұрын
8 14:01 a0mjh.yuyjdvnh Lj7tjgbn6uk?99u O Fn2q. 9UIR54H😢😮😅😊😮😢🎉😂❤@@santeryi9
@hubertoos02223 жыл бұрын
How much have you added baking soda?
@santeryi93 жыл бұрын
I am adding 1% by volume of soda 10% solution
@derrickliebenberg45722 жыл бұрын
Are you adding 10% of baking soda for total volume of oil. Or total volume of sulfuric acid?
@ernestotinoco71013 жыл бұрын
You are a great man. Applause!
@adityadany3013 Жыл бұрын
what is the powder sir ?
@santeryi9 Жыл бұрын
Baking soda.
@babargill81684 жыл бұрын
Dear sir Alek polek Sir I see ur 2nd video for cleaning waist oil Sir please can u tell me ur 2nd compound what is in whit bottle I no it's ur secrets And its my request Please what is u use for 2nd ingredients Plz
@santeryi94 жыл бұрын
Triethanolamine.
@babargill81684 жыл бұрын
@@santeryi9 love u sir
@lavasciences5895 Жыл бұрын
Enjoying the process
@کیانکیانمنش8 ай бұрын
ایا میتوانید به من بگویید..بعد از شفاف کردن.چه مواد افزودنی اضافه کنیم..برای تبدیل ان به روغن موتور
@santeryi98 ай бұрын
شما باید تصمیم بگیرید که روغن شما چه خواصی خواهد داشت، سپس باید به اصطلاح استانداردهای اعمال شده برای هر نوع روغن را بیابید، این استانداردها خواصی را که روغن و همه مواد افزودنی باید بر حسب درصد رعایت کنند، فهرست می کنند.
@marx8754 жыл бұрын
How to make emulsion fuel?
@sylvanenergy5 жыл бұрын
my eyes deceive me....you have glassware on the bench....lol good to see you my friend
@santeryi95 жыл бұрын
Thanks a lot, some glassware is common for me, though not really included in my videos.
@sylvanenergy5 жыл бұрын
@@santeryi9 All the best this Holiday Season my friend. Nephew is kicking around the island somewhere. I think everyone should have their own glassware lab (complete lab) 🙂
@burakdarendeli39854 жыл бұрын
You are man my frent thanks
@kpgrathnasiri53562 жыл бұрын
Sir can u please tell me the recipe for mm liter wise
@ronysalama88888 ай бұрын
Why the oil is clean and so lequied
@santeryi98 ай бұрын
It is oil distillate kzbin.info/www/bejne/rGe6nGeNoLJljrs
@زيادالسامرائي-و3س2 жыл бұрын
السلام عليكم ماهي اسم الماده التي تصفي الدهن المستعمل
@santeryi92 жыл бұрын
هناك نوعان من المكونات ، الأول هو حمض الكبريتيك المركز ، والثاني هو صودا الخبز.
@dilsarapiyumal77093 жыл бұрын
What are the chemical with out filtering
@santeryi93 жыл бұрын
there are two components, first - sulfuric acid, second baking soda.
@dilsarapiyumal77093 жыл бұрын
@@santeryi9 you know with out heating & filtering. Formula
هل هذا البنزين بحد ذاته له رائحة كريهة، أو أن رائحة البنزين تشبه رائحة البنزين، هل هذا لإزالة الروائح الكريهة من الوقود؟
@swapnilshinde60573 жыл бұрын
Great sir👍
@santeryi93 жыл бұрын
Thanks.
@bryaniskoo2 жыл бұрын
What is the white thing
@santeryi92 жыл бұрын
silica gel, check this method: kzbin.info/www/bejne/j4a3ZY2HgqeajNE
@kpgrathnasiri53562 жыл бұрын
How Can make 01lts pls help thanks
@alexramirez75555 жыл бұрын
Can you share the name of the second chemical that you used ?
@Stacy_Smith5 жыл бұрын
Baking soda, sodium bicarbonate
@staym9252 жыл бұрын
Can also The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
@salimsirin79053 жыл бұрын
What's that white thing? CaO?
@santeryi93 жыл бұрын
baking soda.
@uchennatiger47512 жыл бұрын
Nice one Bro
@santeryi92 жыл бұрын
Thanks 🔥
@namenotshown9277 Жыл бұрын
try cornstarch or gelatin as used to clean up cooking oil
@antoniosestar3671 Жыл бұрын
Doesn't work for fossil oil
@namenotshown9277 Жыл бұрын
@@antoniosestar3671 damn how do you know this?
@antoniosestar3671 Жыл бұрын
@@namenotshown9277 because the black color is from oxidation, not from impurities like in cooking oil
@namenotshown9277 Жыл бұрын
@@antoniosestar3671 ok thankyou I see its actually very complex process to make oil new again......too hard for me
@antoniosestar3671 Жыл бұрын
@@namenotshown9277 I already do it at home, its not that hard once you get your distillation going
@mdbadshamia10433 жыл бұрын
Very Nice
@elcharly6292 жыл бұрын
Es muy apreciable el cambio felicidades
@张磁兴-t9u2 жыл бұрын
我听不懂英文。白色液体是什么啊
@impactodelsurenterprise24402 ай бұрын
苏打粉
@zikragreenfarm3 жыл бұрын
Thanks for your help
@tiagocampos32909 ай бұрын
Qual nome do produto?
@phonehaszwenyika29043 жыл бұрын
This is two cool/so great
@bayabayacahyo86544 жыл бұрын
Goodjob
@TRADEFINDER4 жыл бұрын
Plz provide description
@babargill81684 жыл бұрын
Now I m subscribe ur channel
@santeryi94 жыл бұрын
Thanks a lot.
@seifseif91843 ай бұрын
0:47
@mtazeem4405 Жыл бұрын
It's not engine oil ....
@santeryi9 Жыл бұрын
It is a waste engine oil that was distilled first and become so called base oil.
@axer4513 жыл бұрын
Bro, use gloves when handling conc sulphuric acid
@elcharly6292 жыл бұрын
Lo triste no me deja traducir😣
@jbackus96622 жыл бұрын
16 minutes of stirring oil wtf
@santeryi92 жыл бұрын
You can fast forward, just wanted to show the process without cuts, so not accused of lie.
@ekotire8771 Жыл бұрын
how can i get i touch with you
@fd-eh6qe3 жыл бұрын
این روغن کارکرده نیست.
@IHORSHCHERBAN5 жыл бұрын
sulfuric acid - it is very bad idea!!!! Engine is ded! A modern fuel have a 0,001%!
@santeryi95 жыл бұрын
Yes, you have to neutralize it, believe me, the oil companies are using the sulp[huric acid to bleach the fuel, the very same one that you get from the petrol station, in my case I do baking soda, it is alkali but not so aggressive as hydroxide, after that, you still need to use a bit of absorbent and if doubtful, run the copper strip test and check the PH.
@IHORSHCHERBAN5 жыл бұрын
@@santeryi9 soda - work only 30%
@IHORSHCHERBAN5 жыл бұрын
@@santeryi9 "the oil companies are using the sulp[huric acid to bleach the fuel" - no, do not use!!!! Now only a mechanical cleaning method is used! - and therefore 0.001% sulfur! Also, the use of zinc catalysts helps to neutralize sulfur in petroleum during distillation. You do not understand at all the processes of petrochemicals and alcohol distillation.
@santeryi95 жыл бұрын
Sorry Igor, yes you are the most genius person, you know everything, about modern petrol and alcohol distillation, so please tell me if you have at least one patent in this particular field, explain about proper petroleum distillation to the person from Burkina Faso, who tries to make a little bit of fuel for his farm equipment... anyway yes you are the smart person, but honestly your Ukrainian diesel and petrol are far from perfect, In most cases it is made out of natural gas condensate, somewhere around Chernovci, and no one in Ukraine makes it the way you mentioned, moreover it is sounds like you are trying to attract attention to your channel with my help by starting a controversy, accusing me to be dumber than you.
@IHORSHCHERBAN5 жыл бұрын
@@santeryi9 1) I have another channel! 2) I know what I say because I was on refineries in the EU! 3) Yes I am currently in the process of patenting (4 inventions) - so I can not show the equipment! 4) It is not necessary to make conclusions on video on my channel - it is 1% of all experiments. 5) I live in Spain and I got an Immigrant start-up visa to Canada. 6) I have state support in Spain. 7) If you want to talk, then call and I will explain in detail what is the your problem....
@babargill81684 жыл бұрын
Thanks Butt oil have smell How get his smell
@santeryi94 жыл бұрын
The method helps to reduce or eliminate the smell as well.
@babargill81684 жыл бұрын
@@santeryi9 I have a small unit in my home Means I m cleaning oil with Formic acid and bleaching earth With hot temperature Oil clean very well but oil have bad smell Im in lahore Pakistan
@babargill81684 жыл бұрын
Ur waist oil is not to much dirty Butt my waist oil is to much black very dark black he have to all ready to much bad smell u no what type smell
@fatemehsoleimani-zv5xv Жыл бұрын
Thank you for sharing your experiences with us. I left a comment on your contact page. Waiting for your response
@waqasraza47862 жыл бұрын
Can you please help with all the ingredients for bleaching used engine oil
@prabhatpandey31322 жыл бұрын
Contact whatapp +919930708046
@fatemehsoleimani-zv5xv Жыл бұрын
Thank you for sharing your experiences with us. I left a comment on your contact page. Waiting for your response