Homemade Herringbone Table | DIY

I have been working on this project for a while now, and it is finally done.
I wanted to make my own herringbone pattern table. and just went ahead and made one, but not without trouble, it warped quite a bit, and used some time the straighten it's by glueing a plywood plate on the backside while it was being hold straight, and that fixed some of it, but not entirely, so it is still not completely straight, so if you have any good Ideas, please leave a comment.
and because it had taken so long to make, I unfortunately lost some of my videos so not all content is there.
But thanks for checking out my video.
#Herringbonetable #Herringbone-pattern #Herringbone
#DIY #TABLE

[@Nona-z8m]

Finally someone using the herringbone pattern beyond just 2 rows. To me 2 rows makes it look more chevron with staggered points. Herringbone is such a dynamic pattern. Great job it’s BEAUTIFULLY DONE!

[@WarMatt86]

Looks great! Nice to see you back!

[@PawPedersen-s]

Thank you, and great to upload something again.

[@samfisher6786]

Hi there, You made a lovely oak herringbone table (watched on KZbin 👍). You stuck an 8mm sheet on ply on the underside and it appeared from the footage there was a 4/5mm shadow gap around the 4 sides, yet I noticed the oak lipping was flush with the underside on the shot where you were drilling pin holes into the legs. Did you cut the 4 sides of the table with the track saw again after the ply was stuck to the underside so the oak lipping would finish flush to the ply? BTW - to stop the table from bowing, you need to recess U channels along the length. (Router to recess then threaded bolts to secure) I’d be really interested to know the answer to my query above and thank you in advance! Best Sam

[@ChristofferGraversen]

Super flot bord og håndværk 👌

[@וולטרסהנדסה]

beautiful work! what is the size of the small picese? the Heringbone piceses? and which type of wood did you use? Thanks, great video

[@thomasbarratt5333]

Have you experienced any issues with warping?

[@robbiehearle6164]

did you nail down the flooring as well? or did you find the adhesive was enough? Brilliant table!

[@ttrudeau83]

Did you use shiplap for this?

[@renekewin]

Hej Paw. Super fed video. Må jeg høre hvor træet er købt henne? 🙂 Mvh

[@PawPedersen-s]

Mange tak :) Jeg købte det på gulvlageret.dk

[@Sunpixelvideo]

Did you use flooring for the top? Nice project.

[@PawPedersen-s]

Yes, I did. Thanks

[@carlgill1386]

@@PawPedersen-s how many packs of flooring did you use?

[@snw1964]

​@PawPedersen-s what kind of flooring did you use? Did you have to do anything to thr flooring before gluing it down?

[@sighheinrich]

Flot resultat PP!

[@PawPedersen-s]

Mange tak :)