Homemade Laser Trolley DIY (part1)

Gunwale hung laser dinghy trolley.
I needed a trolley for my Laser dinghy so I decided to make one.
I used 30x30x2mm and 50x30x2mm galvanized steel tube for the frame, also some 18x2mm stainless tube and 8mm stainless steel rod. I already had all this in the workshop, the only thing I had to buy was the wheels.
During the video, on the top right corner of the screen, you can see highlighted in orange on the 3D model, the part of the trolley that I'm working on at that particular time.
On the last part of the build I will show all the drawings with all the correct dimensions that I used to make the trolley.
You can check the 3D design part on my previous video:
• Laser Dinghy Trolley D...
I will also upload a 3D to 2D video soon, showing how I generated the drawings from the 3D model.
Enjoy
⭐⭐⭐Help me create new content⭐⭐⭐
Buy me a coffee: www.buymeacoffee.com/theboatr...
Paypal - [e-mail] : www.paypal.com
Patreon: / membership

[@posh4966]

Great videos, thank you for sharing. Quick questions is that 20x20x1.6 un-galvanised steel?

[@TheBoatRambler]

Thanks! It's 30x30x2mm galvanized steel.

[@josequintanaa213]

I need to build.mine, can you share the blueprints???

[@TheBoatRambler]

Yes José, contact me via email and I will send you the plans. 😉

[@andybrown4468]

Hi Great videos, thanks. My trolley is in need of some attention (back has collapsed 😮) I was going to email to grab the plans if that’s okay but I couldn’t find a way of contacting you. What is the best way. Thanks