Homemade Sandblaster

[@mr.vereshchak]

i did this sandblaster special for my previous project! - kzbin.info/www/bejne/q2OxdKuOad5kY9k Hope you liked it, it's really very important thing!) Tell me you new idea for new projects⬇

[@duczman76]

@@rainerdoll1 bin zwar auch kein experte aber da der sandstrahler vom kompressor "befeuert" wird reicht dat vom kompressor wohl aus.außerdem stand dat ausgangsmaterial ja vorher auch unter druck also ist dat in punkto material und wandstärke wohl ok.in der infobox steht ja auch dat mit 7 - 8 bar gearbeitet wird... 🤔 3 bar sind auf der bereifung von meinem fahrrad drauf und der sandstrahler steht ja nicht 24/7 unter diesem druck

[@РусланРомашкин-к9щ]

Что за компресор и сколька давление накатывает отмосфер???

[@salamsimo3585]

Merci

[@Lorand24]

What is the pressure he require to work, and how many liters of air per minute? Where do you buy the nozzle?

[@bethdavis1812]

Spud gun blaster

[@SSingh-nr8qz]

I respect the fact you had enough professional pride to paint and do all the final touches, rather than just weld and assemble and have it looking ghetto. Well done!

[@JV-pu8kx]

Then a cut-off piece of a plastic bottle is duck taped for a funnel.

[@NavinBetamax]

You are winding the Teflon Tape in the wrong direction....It should be wound in the clockwise direction.....so , it wont tear or jam when the fitting is tightened.

[@levta26]

tru dat shit

[@temakozlovski8435]

Correct!

[@ronnypauwels2963]

Indeed its done wrong the tape !

[@Wojtech99]

I know what you feel watching this :P

[@mxrider525TC]

That’s funny i knew I wasn’t the only one scratching my head

[@crossgrainwoodproductsltd9230]

What a great set-up you made. Very clever!! If you blast an item in a tray, you can recycle the grit for another project and that way you dot end up with sand everywhere. You filmed this perfectly so anyone of your viewers can make one too. Thanks!

[@saeed6811]

This is the ONLY DIY sand blaster made right i have seen so far. Proper consideration of the outlet fittings and hose size is the key here. Almost all DIY guys use a small hose that doenst allow enough flow of sand. The overall project is super great. You were feeling the outcomes while designing. I like it. Unlike others who just take whatever they have and throw in there. This thing can do really creazy stuff if hooked with a mssive compressor and a bigger nozzle.

[@mr.vereshchak]

Many thanks) after 5 years using everything working good.

[@coltonjacobs5383]

The whole time I was thinking;”Ok, he has to have cut corners somewhere in the budget.” *sees water bottle funnel “Oh, there it is.” Great job man, turned out a lot better than I expected.

[@superdrinkerb6432]

*sand funnel

[@1.618_Murphy]

Everyone is talking about the Teflon tape situation! But you did one thing great! You took a safety precaution at the very first by filling up the cylinder with water to rinse off all the remaining gas particles! I appreciate that!

[@Qternocq]

Is there any risk of this tank exploding? I've seen some videos of it happening to less rusted (and way less welded on) tanks. I have this amazing compressor, but I'm now scared of using it because it had water in it for about 2 years.

[@chrisholifield8571]

3:10 putting teflon tape on wrong 3:46 putting teflon tape on correctly Over all this is a very very good instructional video. Great job!

[@wlan246]

2:59 You should apply teflon tape clockwise (in the direction of tightening), so that it doesn't bunch up as you attach the fitting.

[@edwinso8173]

I was gonna ask about this in the comments because I was starting to think that I've been doing it the wrong way. Thanks

[@stevesf28]

I was thinking the same thing, but then I thought that bunching up may enhance the seal.

[@wlan246]

@@stevesf28 If anything, the uneven thickness of bunched-up Teflon tape will promote leaks.

[@alexpikov1752]

Тефлоновую ленту не правильно наматываешь на резьбу, нужно наматывать по ходу резьбы.

[@ambient7509]

Он не русский, этим все и объясняет.

[@John_Santyago]

@@ambient7509 Ага, ВЕРЕЩАК- не русский :)

[@Serp_3000]

Ха, тоже заметил. Думал я один наматываю в ту сторону в которую закручивается.

[@konstantinsamsonov607]

@@John_Santyago 100% не русский

[@Абдыкадыр-ц4я]

@@konstantinsamsonov607 если не русский то стал бы он на русском писать в видео

[@Cpt_Adama]

Nothing like using the tool you just created to refinish itself. Good job!

[@mcorrade]

sweet

[@Gharcian]

классно получилось! Про намотку уплотнения в сторону закручивания уже писали. Лучше полиамидную нить юзать - чуточку дороже, зато надежность, простота и удобство на голову выше. Плюс возможность позиционировать соединяемые фитинги (фум это не допускает). Сажать грипсы и шланги лучше на мыльную водичку. Легче надевать, и держаться будет намного лучше (мыло после высыхания воды будет играть роль разъемного герметика). Кстати грипсы эти так себе - неопрен китайский слишком мягкий, рвется и охотно впитывает грязь с рук. Либо резиновые ручки, либо текстильная изолента лучше не придумать. Про давление, расход воздуха/дроби ничего автор не сказал, а очень интересно! За видюшку больое спасибо - лаконичность мы всегда лайкаем.

[@mr.vereshchak]

Спасибо за советы возьму во внимание. Сопло 3 мм. расход воздуха 500-600 л в минуту.Давление 7-8 bar. еще нужно хороший влаго масло отделитель перед пескоструйным аппаратом. сейчас добавлю в описание)

[@c-jay2458]

@@mr.vereshchak подскажите а есть вариант сделать наполовину такой толко инфекционного типа купив готовый пистолет и соплом?

[@c-jay2458]

ижекционного типа

[@ВованВованыч-с4ш]

У меня сопло четвёрка с давлением в пять очков работает но эти пять должны постоянно держаться

[@frankmartin7922]

@@ВованВованыч-с4ш Это надо аж литров 900 в минуту. Три ремезы 2.2 квт соединить))

[@jell-oputin8036]

Omg! The Teflon tape is going the wrong way! We’re all gonna Die! 😁👍🏼

[@SanshokuCustoms]

Jell-O Putin i was yelling that, teflon backwards

[@jasonthurston799]

Every fitting he wrapped!

[@williamfernando1909]

@@SanshokuCustoms even me lol..

[@SanshokuCustoms]

william fernando 😂😂😂

[@ermay3031]

Lol weak ass tape job 10 for creativity 0 for tape job

[@MrWayneploof]

You may have put the Teflon on wrong but your sand blaster seems to work better than the one I bought. nice build

[@truthhurts5379]

I noticed it right away😁

[@Michmanjuga]

Ты крут, чувак! Это самая простая конструкция, что я видел. Awesome!

[@igorki67]

Автор красава, одним движением намотав не в ту сторону фумку и куча коментов на эту тему. 🤣 Думаю это запланировано. 👍

[@MrMadhousedave]

You make this Look so easy. My hats off to you. The tapes on wrong for the experts but they don’t even say how great the item looks or the quality of your workmanship. I love it when the little guy or home builder shows how good things can be when you have heart. Let the haters hate while you enjoy the comments from those that admire your talent as I do. Congratulations I enjoyed your build and look forward to more.

[@mr.vereshchak]

Thanks)

[@Cradley684]

Brilliant job my man, have a nice day just be careful with sandblasters !!!.

[@mr.vereshchak]

Thank you so much!!

[@JmBenieves]

Mama mo sandblaster

[@kingcorvous9725]

@@JmBenieves skwater ka gago

[@foshizzlfizzl]

Молодец! Надеюсь не забывайте маску. Пыль очень вредная!

[@andrzejporeda7281]

Super jest to źecz i bardzo fachowo jest to wykonane pozdrowiam serdecznie 👍👍👍👍👍👍

[@mavricion]

обожаю этакие работы! почти что с оттопыренным пальцем все сделано, цивильно, чётко, аккуратно, эстетично.

[@ВладимирЗахаров-в7б]

Как всегда, изящно и рационально. Работа супер, да и понятно показано. Спасибо.

[@matthewbritzman6979]

It’s giving me anxiety watching you put that Teflon tape on backwards 😂

[@demianperez7380]

and too much

[@MrSeth166]

Absolutely ridiculous, no common sense.

[@DONTCALLMETHAT]

Same 😂

[@hafizshirazi8722]

Молодець пацан, вгадав на всі 💯%, що розумники почнуть писати в догонку, що намотав Фуму проти годинникової стрілки!

[@timflanigan8586]

Great idea! Teflon tape should ALWAYS be wrapped clockwise....

[@mr.vereshchak]

Thank you, got it!!

[@rafaswierczynski]

Even on left threads? ;)

[@duminicad]

Rafał Świerczynski i haven’t seen pipes with left hand threads yet, depending on the pipe fitter, it might give you the impression that it’s left hand thread, tho chances are very slim.

[@rafaswierczynski]

I totally agre on, let say, standard pipes. But there is more usage of teflon tape ;) and i was learnd - wrap tape in direction you rotate your pipe/fitter... but in general - clockwise ;)

[@duminicad]

Rafał Świerczynski that’s correct, always wrap in the tightening direction. I would also add that depending on pipe thread quality, you should use more or less teflon tape turns, sealing paste is more useful, get one if you have the chance, it’s affordable and more efficient.

[@teacheng3795]

Fantastic! You are a genius, I love it!! Well done again from Melbourne Australia

[@mr.vereshchak]

Thanks)

[@ИванИванов-ф1у3г]

Melbourne ... 🙄 other side if the Earth. Very far from here! 🚢 I just did'nt understand - what kind of material He made the nozzle from? Looks like factory made. The people (homemakers))) usually use the spark plug's isolator for it.

[@oompalumpus699]

Watching rust as it's removed by sandblasting is so satisfying.

[@SirNeikter]

"I used a sandblaster to blast a sandblaster"

[@lerrissesemosa5165]

Fuck u

[@lubiefendi8513]

Wait a minute

[@johnharrison2466]

Yaaaasssss

[@akbychoice]

If you have ever cleaned a vacuum cleaner, that makes you a vacuum cleaner.

[@_Killkor]

@@akbychoice Do you power inhale the dust out of your vacuum cleaner? :D

[@alkennedy1124]

I already made a home made sand Blasberg , and I used a cabinet pistol 🔫 grip feeder hose and went a go some river bed sand in a 5 gallon bucket 🪣, and just stick the suction hose in the sand in the bucket, it works real good , nice simple way to do no work and pay nothing for any of it , loll, nice your deal is a lot of work , and none of us have the equipment todo this , lolol, nice thanks BigAl California.

[@ВаняВаня-ч7к]

👍какой компрессор используешь для этих целей?

[@pavellukichev4885]

What compressor do you use?

[@mr.vereshchak]

Поршневой компрессор AirCast CБ4/С-100.LB30 (РМ-3126.03) Он выдает 340 л. на выходе. Для сопла 3 мм нужно 500-600 л. приходится делать паузы чтобы накачал воздух.

[@ЯнСтааль]

@@mr.vereshchak а можно у вас такой под заказ сделать?

[@azdesert8963]

Great job, I worked for blasting and coating for about 5 years, we did oil tankers and supertankers. I went to work at DON shipyard for year. Then went to over aircraft DON F-14, A-6... We used coal slag, glass bead, rice hulls, aluminum oxide, baking soda... Then did shot peening to reduce fatigue in high-stress parts. Again great job.

[@angrysweet8932]

Great job man, congratulations !!

[@gabrielruvalcaba2310]

Very interesting rolling the Teflon backwards.. But one hell of a nice sandblaster Excellent idea keep those videos coming..

[@walshesworkshop]

Yep, that looks safe enough for me to try! Who am I kidding, I’m still at the vinegar stage 😬

[@RGerard_Costa]

So... you made a sand-blaster to sand-blast the sand-blaster... nice

[@comfycomfy5436]

Однозначно Like 👍👍👍👍👍.....

[@MOUNTAINEAGLES]

Excellent job 👍

[@sayyedindia003]

Your teflon tape winding is wrong It should be clock wise

[@beedeetridip8480]

Great and very nice job! It gives me the idea to use my old unused acetylene bottle to be a sand blasting unit and make some money for sand blast service.

[@DimchBosch]

Чудово зроблено👍🏼

[@mr.vereshchak]

Дякую)

[@ЯрославТитомир-л1й]

@@mr.vereshchak єдине, що не зрозумів, це чому ФУМ накручується проти ходу різьби :)

[@darrentylor5473]

That's one badass sand blasting machine!!!

[@c-martz2846]

104 thumbs down just because he put the teflon backwards meanwhile the teflon tape didn't fail. damn, people are so petty and mean. This guy just showed "ONE" method into making a sandblaster and all of the sudden, all engineers break loose and just point out one method of using tape while the function of the sandblaster works. "How dare you" Greta thunderburg :)

[@michaelmiller6013]

C-Martz break loose

[@kmg501]

On a video with a lot of views I expect some of the thumbs down are actually just miss-clicks, and since people are so varied you are going to have people who thumbs down for any odd ball reason. I stopped being bothered by that stuff long ago. It is the up-loaders who disable the thumbs and comments that bug me. (Usually I won't watch their videos again).

[@13daniel1974]

Why is is wrong to help someone do something even better? You just mad that you couldn't actually share a little knowledge? LOL

[@c-martz2846]

Michael Miller I know I know but itz KZbin, 😂

[@c-martz2846]

kmg501 very true, i also try to ignore them as well.

[@ajessop8693]

You made a sand blaster to sand its self 😎 legend

[@ajessop8693]

Felt a bit uncomfortable watching you put the grips on 😟

[@marcialrubiojimenez64]

Te has fabricado una maquina genial. En apariencia fácil de hacer y con un gran rendimiento de trabajo. Una pasada 🙂👍gracias.

[@Kevin-gx8lc]

Nice design and build (apart from wrapping the Teflon tape the wrong way) I need a sandblaster and will build one to your design. Thanks for sharing. Greetings from Southport UK. Хороший дизайн и сборка (не считая неправильной обмотки тефлоновой лентой). Мне нужен пескоструйный аппарат, и я сделаю его по вашему проекту. Спасибо, что поделился. Привет из Саутпорта, Великобритания.

[@hajorodyk1470]

Excellent, though with all your great workmanship, I would’ve thought that a grip/handle should’ve been put near the nozzle hand for easier use.

[@detroitdave1637]

I’m making one of these this spring 2021!!! Great job brother!!!!!

[@mr.vereshchak]

Thanks)

[@joseagosto8542]

El tape teflón se pone a favor de la rosca no en contra.

[@daniellago2013]

Iba a poner eso, igual es un muy buen video

[@leonardovinci3535]

saben porque llena de agua el tanque?????

[@daniellago2013]

@@leonardovinci3535 pienso yo para verificar que no este pinchado o tenga alguna fisura

[@leonardovinci3535]

@@daniellago2013 realmente no es asi, . se llena de agua el tanque para evacuar cualquier gas combustible que pueda estar en el tanque ya que con el tanque lleno de agua ya no hay espacio para otro gas y vaciando el agua se puede tener la certeza de dejar limpio de gases el tanque. esto es porque cuando se suelda o se esmerila el tanque hay chispas que si hubiera un gas combustible cautivo del tan que podria explosionar causando tragedias y/o muertes. las fisuras o pinchazos se verifican haciendo una prueba de hermeticidad llenando el tanque con aire a cierta presion.

[@DBLOCKDBLOCK-uf3yy]

Why are people hating on this guy.... shit looks fantastic to me !

[@dcgo44r]

It just occurred to me that by the time you are done with all this projects you might end with a small beach on the back of your house, just add a pool! 😂

[@RomanDJ2011]

Excellent work! Very good

[@dennydewaal137]

He is dowing the teflon tape wrone iT supose to go whit the wirrer do

[@TheYpavon79]

Excelente Amigo, Gracias por Compartir, Te Felicito!!!... Saludos desde Venezuela

[@larrywhalen127]

Very nice project and I liked the use of the "ball-valves" for applying the media; did you have a "dead-man" somewhere in your system in case of an accident or did I miss it completely. Pretty sure I have enough parts in the shop and my garage to build one of those since I have a few motorcycles and a m/c trailer which needs to be taken down to bare metal to be primed and painted so it looks like that is my project for this week. Thank you for sharing an excellent build, and as long as the tape hasn't failed yet, that means it must have been applied correctly. LOL.

[@TheBiggermc]

Saludos desde Venezuela y exitos por tu video bendiciones

[@mr.vereshchak]

Gracias!)

[@papalilburn]

Harbor Freight for less than the price of your parts & pieces, and it works!

[@jtfisrtbuild947]

And with out duct tape

[@jtfisrtbuild947]

Yeah your right about that really cool and mostly was ment to be funny . And I myself make stuff just because it's cool and when I'm done it costs more than just going and buying it as well

[@MrHBSoftware]

@@jtfisrtbuild947 duct tape for the funnel on the top is a problem dude? do you use drugs???the nozzle and hose he uses costs more and is worth more than the whole harbour freight sandblsater...you can use it to unclog toilets at best

[@Bulletguy07]

This is pure genius!!

[@adamjankowski8658]

Sand running through the hose is going to wear out things quickly.

[@normanbuchanan9710]

never thought I needed a sandblaster till I saw your video great job very innovative.

[@カルログ]

シールの撒き方が逆だよ。 そっちだと緩む。

[@eduarditogonzales4485]

Very good....Now having a mobile sandblaster you can do boats, gates, farming and transport equipment....Thought about?

[@squidlings]

Ive got a tin of grey primer which does the same 💪🏻

[@jfloresmac]

It blasts rust away? Man, thats some good primer.

[@ars411]

Very informative. Thanks for sharing. Respect from India.

[@williec.1540]

My friend, you're applying teflon tape on the wrong way.

[@mahabub1409]

Yeah

[@snoopy5736]

I bet you can't make this

[@williec.1540]

@@snoopy5736 I don't need one - my comment wasn't to insult him, it's called constructive criticism. In no way was I being disrespectful, this section is for comments and that's what I did - write a comment.

[@ignacioserrano1452]

Gracias por el aporte caballero , solo una consulta de cuánto de potencia debe ser la compresora??

[@ИльнарЗигангиров-ф2с]

Фумку в другую сторону мотают, аж на нервы действует)

[@mr.goodwill6135]

"слюшай такой неприязнь испитывал, что аж кюшать не могу" (с) Мимино

[@УилиСадовник]

А какая разница? Так, как он намотал или по часовой намотал бы? Работает же, в чем проблема тут, интересуюсь..

[@jeffryLebovsky]

@@УилиСадовник если посмотришь, у него фумка каждый раз задирается при закручивании. работать будет, но иногда из-за этого может в итоге не загерметизироваться стык.

[@miguelmartinez7001]

Beautiful work man brilliant

[@mihailmelnikov1860]

7 МИНУТ ВАРИЛ КРАСИЛ ПОТОМ ВСЕ РАВНО СКОЧЕМ ДОДЕЛАЛ

[@ЮрийНикифоров-с6с]

Да,пускай он плохо варит ,зато своими руками от и до ,вне как многие говорят я сделал я построил ,а на деле нанял и рядом стоял мозги е,,,,л .

[@BITTYBOY121]

Very good project - Well done ! 👍👍👍

[@mr.vereshchak]

Thank you!

[@BITTYBOY121]

@@mr.vereshchak You are very welcome :-) Take care and all the very best for 2021. 👍

[@christopherbonanno1120]

Now I want to see you make homemade SAND. 😂

[@knallaff]

Sehr geil! Ich liebe Deine Arbeiten und Videos! Vielen Dank und beste Grüße aus Deutschland!!

[@mr.vereshchak]

Vielen Dank))

[@13daniel1974]

Dude, you run your Teflon tape backwards when you apply it. It will do better if you roll it with the threads versus against.

[@guestaccount4485]

How much sand per minute does it spend? And the guy is right for the teflon tape shoud be applied clockwise as the thread direction but you did a great job!

[@k.r.99]

Russia 2019: homemade sand blaster Russia 2025: homemade nuclear plant

[@mr.vereshchak]

😂🤣😉

[@mukhlishidayat8258]

2025 homemade nuclear in the kitchen

[@kartunanakindo391]

🤣👍

[@wowrogue2]

All the plumbers are going nuts at the moment on this one. Just to help out if no one posted already. Thread tape works best when wrapped in the direction you'll be tightening the fitting. So it smears into the threads instead of bunching up :) nice video by the way.

[@mollyfilms]

Where is the “A” Team theme music?

[@bloomdayprogram5459]

did you have any issues with the ball valve at the nozzle losing its ability to operate due to the sand going through?

[@elizabethtaylordovganenko772]

3:12 тифлон по часовой нада !!

[@Redneckmfg]

Very nice build !

[@mr.vereshchak]

Thank you!)

[@Redneckmfg]

You are welcome after looking at your list of uploads.. I can see why you have 100K of subscribers... Very impressive list of uploads... I cant wait to get caught up on watching your previous uploads... I subscribed...lol

[@baldrickscunningplan6154]

Teflon tape abuse. This really is "the end."

[@МастерскаяПриэльбрусье]

Красиво получилось.👍👍👍

[@mr.vereshchak]

Спасибо)

[@evgeniymaster5580]

С хорошим то компрессором можно пескоструить,а попробуете с китайской балалайкой, плюнете на писькаструй и выкинете этот баллон в металлолом за ненадобностью и бесполезностью

[@frankmartin7922]

Для китайской балалайки можно использовать сопла со свечек, есть некоторые свечи, у которых снизу электрод очень тонкий, сопло получается 2 мм, даже дохлый китаец справится, нужно только песок сеять хорошо. Ну и на али можно заказать 2мм из карбида бора.

[@DataStorm1]

@3:10 teflon tape wound the wrong way around, always WITH the thread, not against. the result of such is visible at 6:16, the teflon unthreads and doesn't go in. Also, teflon should be run over slightly stretched and only 2-3 layers on the thread max. its to fill the gaps between the threads, not to make it so thick that the threads stick out much more (which is totally not it's function).

[@-Gunnarsson-]

You never know when a rust tank explodes.

[@franklinferreira2779]

Extintor não tem gás.

[@jesussofonianchamorroramir19]

Cuantas libras de aire necesita este sistema? . Muchas gracias

[@mr.magazine]

Почему у меня руки из жопы.... Все чего то мастерят кроме меня)

[@viktorvetis8125]

Это потому что ты «рукожоп»

[@JerryHolaway]

I never seen anyone use so much teflon tape in my life but well done video

[@outdooradventures6403]

Easier way, you can just buy this thing professionally made at Harbor freight for rly cheap😭

[@RakTheGoose]

not everyone lives in the US to be able to go to harbor freight and pick up a sandblaster

[@samuelefraincardenasbermud6789]

Muy buen trabajo. Excelente video, gracias por compartirlo. La arena es especial para estos trabajos o puede ser cualquier arena?

[@ИосифСталин-в6й]

Топорненько, особенно баклашка и скотч, а так работает ну и х..й с ним, лайкос

[@tormozzzful]

Ну все вариабельно. Я вот такой хочу сделать в мастерскую, но делать хочу месяц и чтоб все было безумно красивым и аккуратным, чтоб аж пользоваться жалко было))) типа везде все напидорено до зеркала, гы

[@frankmartin7922]

@@tormozzzful Очень желательно сделать конус и приварить снизу баллона, тогда сыпаться будет куда лучше песок. И кран взять задвижку, а не шаровый, им регулировать точнее получается.

[@patricedelamotte5199]

J'aime bien ...sableuse de compétition ça envoie fort

[@faustinomartinez707]

Me gustó que con el mismo equipo pintaste la nueva erramienta no como otros vídeos que nisiquiera aprovechan el equipo. Saludos muchos éxitos

[@rayanefree5790]

Really good job 👍👍

[@splatharackal1337]

The first blasting on the same blaster ,... Do you collect the sand ftom seashore ?

[@michaelkleindienst5404]

Clean work and nice shop. Appreciate your video.

[@mr.vereshchak]

Thank you!)

[@noeljshah1]

Lovely. Very professional. 👌👍

[@КоляКоновальчук-о3к]

Очень впичатляет. Мо отец ещё90 году такое сконструировал. А для меньшего росхода песка и адекватно направленого факела с песком на выходе сделал насадку из победита с отверстием диаметром 3-4милиметра.👍👍👍

[@danilocortez8536]

Hola soy de Argentina. Esta a la venta para el extranjero era herramientas?

[@penonton4260]

wow luar biasa. keliatan sederhana. tapi hasil nya ~

[@LaucarFrenosYembragues-tc9ob]

Hola muy bien hecho el sistema, muy prolijo. Pero hay un problema que vas a tener mas adelante, las llaves de paso y pico donde sale la arena no aguantan y se comen en poco tiempo. lo digo por experiencia. Saludos

[@mr.vereshchak]

Hola! Yes, I already learned about it)

[@yasserbadran4699]

Great job, what about the size of the air tank? I think tank size and compressor type are an important factor